Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny Arduino-compatible board with ATmega328, 5V logic, and built-in FTDI USB-serial. Perfect for breadboard projects needing full GPIO in a small footprint.

Key Highlights

  • ATmega328 microcontroller with 32KB flash and 16MHz clock
  • 20 digital I/O pins, 6 analog inputs, 6 PWM outputs
  • Genuine FTDI USB-to-serial converter for programming
  • 5V onboard regulator with 150mA output
  • Four indicator LEDs for power, RX/TX, and pin 13
  • Breadboard-friendly 0.6" width after header installation

Ideal For

  • Makers building compact breadboard prototypes
  • Students learning Arduino programming
  • Hobbyists creating small sensor nodes
  • Educators teaching electronics and coding
  • Developers needing a tiny USB-enabled board

Buying Tip

Remember to order a micro USB cable separately, as it is not included, and be prepared to solder the headers if you plan to use a breadboard.

Elecvora expert review

Our verdict

The Adafruit Metro Mini 328 offers a compelling blend of size and functionality, making it an excellent choice for space-constrained projects that still need full Arduino compatibility. Its genuine FTDI chip and robust build quality set it apart from generic clones.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Tiny footprint yet full 20 GPIO
  • Genuine FTDI USB-to-serial for reliable programming
  • Onboard 5V and 3.3V regulators
  • Pre-loaded Optiboot bootloader
  • Breadboard-friendly after header soldering

Cons

  • Headers require soldering for breadboard use
  • Micro USB cable not included
  • Limited to 32KB flash and 2KB RAM

Best for

Compact Arduino-compatible projects needing USB and full I/O

Not ideal for

Users who need wireless connectivity or large memory

Specifications

Item TypeDevelopment Board
Board TypeMetro Mini
Chip TypeATmega328
Flash Memory32KB
Clock Speed16 MHz
Logic Input (V)5V
Input Voltage (V)6-16V (a 9VDC power supply is recommended)
Digital I/O Pins20
Weight (g)3gm
Dimensions (L x W x H) mm18mm x 44mm x 4mm / 0.7″ x 1.7″ x 0.2″
Shipping Weight0.006 kg
Shipping Dimensions9 × 7 × 1 cm

What's in the box

  • 1 x Adafruit Metro Mini 328 board
  • 1 x stick of 0.1" headers

Frequently Asked Questions

Is this board compatible with the Arduino IDE?
Yes, it is fully compatible. Simply select 'Arduino UNO' as the board type in the Arduino IDE.
What power supply does the Metro Mini require?
You can power it via micro USB (5V) or connect a 6-16V DC supply to the Vin pin; a 9V adapter is recommended.
Do I need to solder anything?
The board comes fully assembled, but if you want to plug it into a breadboard, you must solder the included headers.
What is included in the package?
The package includes one Adafruit Metro Mini 328 board and a stick of 0.1" headers. A USB cable is not included.
Can I use 3.3V logic with this board?
Yes, by cutting the jumper on the bottom and soldering it closed, you can convert the logic level to 3.3V.
Is the USB connector micro USB or USB-C?
The board comes in two variants (micro USB or USB-C) and you will receive one randomly.

Overview

The Adafruit Metro Mini 328 packs the familiar ATmega328 microcontroller into a tiny, breadboard-friendly form factor. Measuring just 18mm x 44mm x 4mm and weighing only 3 grams, it delivers 20 GPIO pins, 6 analog inputs, and hardware support for SPI, I2C, and UART. A genuine FTDI USB-to-serial converter enables programming and serial monitoring through the Arduino IDE, where you can select 'UNO' as the target board. The Metro Mini is fully assembled and tested, with the Optiboot bootloader pre-installed.

Key Features

  • ATmega328 brains: 32KB flash (0.5KB reserved for bootloader), 2KB RAM, 16MHz clock.
  • Flexible power: 6-16V DC input on Vin pin (9V recommended) or 5V via micro USB.
  • Onboard regulation: 5V regulator with 150mA output; 3.3V at 50mA available via FTDI chip.
  • Indicator LEDs: Green power, two RX/TX, and a red LED on pin 13 for debugging.
  • Logic level options: Default 5V logic; can be converted to 3.3V by cutting/soldering a bottom jumper.

Specifications Explained

The ATmega328 provides 32KB of flash memory, enough for most sketches, and 2KB of RAM for variables. With 20 digital I/O pins, you can connect sensors, buttons, LEDs, and more; 6 of these pins double as analog inputs for reading sensors. Six PWM outputs on three timers (one 16-bit, two 8-bit) enable dimming and motor control. The 16MHz clock speed ensures responsive performance. The onboard 5V regulator accepts 6-16V, making it easy to power from a 9V battery or wall adapter, while the USB connection supplies 5V for programming.

Compatibility and Requirements

The Metro Mini is programmable via the Arduino IDE; simply select 'UNO' from the boards menu. It requires a micro USB cable (not included) for programming and serial communication. Headers are included but require soldering if you want to plug the board into a breadboard or socket. The board works with standard Arduino shields and accessories that use 5V logic, and the 0.6" width after header installation fits standard breadboards.

Typical Uses

Ideal for small robotics, sensor nodes, LED controllers, wearable prototypes, and educational projects. Its compact size and built-in USB make it a go-to choice for breadboard prototyping where space is limited but full functionality is needed.

What's in the Box

1 x Adafruit Metro Mini 328 (fully assembled and tested with bootloader) and 1 x stick of 0.1" headers.

Quick specs

Item Type
Development Board
Board Type
Metro Mini
Chip Type
ATmega328
Flash Memory
32KB
Clock Speed
16 MHz
Logic Input (V)
5V
See all specifications