
1 / 4 · Click to enlarge
AI Summary
A tiny ATtiny85 board with Mini USB and Arduino IDE support. It offers 5V logic and can run at 16MHz, perfect for compact projects.
Key Highlights
- ATtiny85 microcontroller with 8KB flash, 512B SRAM, 512B EEPROM
- Mini USB for power and programming
- USB bootloader for easy reprogramming
- 5V operating voltage, 8MHz default, 16MHz via software
- 5 I/O pins including analog inputs and PWM
- Arduino IDE compatible with simple config changes
Ideal For
- Makers building compact wearable electronics
- Hobbyists creating small robots or sensor nodes
- Educators teaching embedded programming with Arduino
- Designers needing a low-cost permanent microcontroller
- DIY enthusiasts working on space-constrained projects
Buying Tip
Remember to order a Mini USB cable separately, as it is not included and is required for programming and power.
Elecvora expert review
Our verdict
The Adafruit PRO Trinket is a well-designed, tiny board that brings Arduino compatibility to the ATtiny85 in a user-friendly package. It is perfect for small projects where space and cost are critical, though its limited I/O and memory mean it's not for complex applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small size fits into tight enclosures
- Low cost makes it ideal for permanent installations
- USB bootloader simplifies programming
- Arduino IDE compatible with minor setup
Cons
- Only 5 I/O pins, limiting expansion
- Requires a Mini USB cable, not included
- Not compatible with standard Arduino shields
Best for
Compact, low-cost projects needing basic microcontroller functions
Not ideal for
Projects requiring many I/O pins or large code space
Specifications
| Item Type | Development Board |
|---|---|
| Board Type | Trinklet Type |
| Chip Type | Amtel ATtiny85 |
| Operating Voltage (VDC) | 5 |
| Flash Memory | 8kb |
| USB | MINI USB |
| Clock Speed | 8 MHz |
| Shipping Weight | 0.003 kg |
| Shipping Dimensions | 9 × 10 × 1 cm |
What's in the box
- 1 x Adafruit PRO Trinket - 5V 16MHz
Frequently Asked Questions
What is the difference between the 3V and 5V Trinket?
Can I program the Trinket with the Arduino IDE?
What cable do I need to connect the Trinket?
How much flash memory is available for my sketches?
Can I stack shields on the Trinket?
What is the operating voltage of this board?
Overview
The Adafruit PRO Trinket is a miniature development board designed for projects where space is tight and cost matters. Built around the Atmel ATtiny85, it packs 8KB of flash memory, 512 bytes of SRAM, and 512 bytes of EEPROM into a board small enough to fit almost anywhere. The onboard Mini USB jack handles both power and programming, and the USB bootloader makes reflashing straightforward. Whether you are prototyping a wearable, a small robot, or a sensor node, the Trinket offers a low-cost, Arduino-IDE-compatible platform that you can embed and leave in place.
Key Features
- ATtiny85 core: 8KB flash, 512B SRAM, 512B EEPROM for compact code and data storage.
- Mini USB connectivity: Power the board and upload code over USB without extra adapters.
- USB bootloader: Preprogrammed for easy firmware updates; LED indicator shows status.
- Flexible clock: Runs at 8MHz internally; can be doubled to 16MHz in software.
- 5 I/O pins: Includes analog inputs and PWM outputs for sensors and actuators.
- Arduino IDE support: Works with the Arduino IDE after a few simple configuration changes.
Specifications Explained
The 5V operating voltage means this board is suited for components that expect 5V logic, such as many sensors and modules. The ATtiny85 provides 8KB of flash for your sketches, with about 5.25KB available after the bootloader. The internal oscillator runs at 8MHz by default, but you can set it to 16MHz in software for higher processing speed. The 5 I/O pins include analog-to-digital conversion and PWM, enabling you to read sensors and control motors or LEDs. The Mini USB port is used for both power and data, so you can program the board from any computer with a USB port.
Compatibility and Requirements
This board is compatible with the Arduino IDE, but requires some configuration changes to the IDE to recognize the Trinket. It can also be programmed with AVRdude using a simple config modification. A Mini USB cable is required for programming and power, but is not included. The board does not support stacking shields due to its small size. For projects needing 3V logic, a separate 3V version is available.
Typical Uses
The Trinket is ideal for small, simple projects where a full-size Arduino would be excessive. Examples include wearable electronics, small robots, LED controllers, sensor nodes, and embedded projects that need to fit into tight spaces. It is also a good choice for permanent installations where you don't want to sacrifice a more expensive board.
What's in the Box
Package includes: 1 x Adafruit PRO Trinket - 5V 16MHz.
Quick specs
- Item Type
- Development Board
- Board Type
- Trinklet Type
- Chip Type
- Amtel ATtiny85
- Operating Voltage (VDC)
- 5
- Flash Memory
- 8kb
- USB
- MINI USB


















