
1 / 5 · Click to enlarge
AI Summary
This AMS1117-based module steps down 4.5-12V to a fixed 3.3V at up to 0.8A. Its 0.1-inch header pins make it easy to plug into a breadboard for quick prototyping.
Key Highlights
- AMS1117 IC provides fixed 3.3V output
- Wide 4.5V to 12V input range
- Up to 0.8A output current
- Breadboard-friendly 0.1-inch header pins
- Red LED power indicator
- Compact 26mm x 12mm board
Ideal For
- Electronics hobbyists building breadboard prototypes
- Students learning about voltage regulation
- Makers needing a compact 3.3V power source
- Engineers prototyping 3.3V logic circuits
- DIY enthusiasts working on small gadgets
Buying Tip
Remember that the module ships unsoldered, so you will need a soldering iron to attach the header pins if you plan to use it with a breadboard.
Elecvora expert review
Our verdict
This module is a straightforward, no-frills solution for adding a 3.3V rail to your projects. Its compact size and breadboard-friendly design make it a handy tool for prototyping.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple to use with clear input/output markings
- Breadboard-friendly header pins
- Compact and lightweight
- Built-in power indicator LED
Cons
- Linear regulator can get hot under high load or high input voltage
- Ships unsoldered, requiring soldering for breadboard use
- Maximum output current of 0.8A may be limiting for power-hungry devices
Best for
Quick 3.3V power for low-current breadboard projects
Not ideal for
High-current or battery-powered applications where efficiency is critical
Specifications
| IC Chip | AMS1117 |
|---|---|
| Input Voltage (V) | 4.5 to 12 |
| Output Voltage | 3.3 |
| Max. Operating Current (A) | 0.8 |
| Length (mm) | 26 |
| Width (mm) | 12 |
| Weight (g) | 0.6 |
| Shipping Weight | 0.085 kg |
| Shipping Dimensions | 6 × 3 × 1 cm |
What's in the box
- 1 x AMS1117 3.3V power supply module (unsoldered)
Frequently Asked Questions
What is the maximum input voltage for this module?
Can I use this module to power a 5V device?
Does the module come with header pins?
How much current can it supply?
Is a heatsink required?
Can I connect multiple devices to the output?
Overview
The AMS1117 3.3V Power Supply Module is a compact buck converter built around the AMS1117 linear regulator. It takes an input voltage between 4.5V and 12V and delivers a steady 3.3V output, making it a practical solution for powering 3.3V logic circuits from higher-voltage sources. The module is designed for ease of use: standard 0.1-inch header pins allow direct insertion into a breadboard, and a red LED indicates when power is applied. Two mounting holes let you secure the board to a project enclosure or expansion board.
Key Features
- AMS1117 regulator IC for reliable 3.3V output
- Wide input range of 4.5V to 12V
- Up to 0.8A output current for small motors, sensors, and microcontrollers
- Breadboard-friendly 0.1-inch pitch header pins
- Power indicator LED (red) shows when the module is active
- Compact dimensions of 26mm x 12mm and weight of 0.6g
- Dual mounting holes for secure installation
Specifications Explained
The input voltage range of 4.5V to 12V means you can power the module from common sources such as 5V USB, 9V batteries, or 12V adapters. The fixed 3.3V output is ideal for chips like ESP8266, ESP32, and many sensors that require 3.3V. The maximum operating current of 0.8A is sufficient for most low-power projects, but note that the AMS1117 is a linear regulator, so it may heat up when the input voltage is much higher than 3.3V or when drawing high current. The small size (26mm x 12mm) and light weight (0.6g) make it easy to integrate into tight spaces.
Compatibility and Requirements
The module is compatible with standard breadboards and perfboards thanks to its 0.1-inch header pins. It requires a DC input between 4.5V and 12V. No additional components are needed for basic operation, but ensure your input source can supply the required current. The module comes unsoldered, so you will need to solder the header pins if you want to use it with a breadboard.
Typical Uses
- Powering 3.3V microcontrollers and development boards
- Providing a stable voltage for sensors and analog circuits
- Breadboard prototyping of 3.3V logic systems
- DIY electronics projects requiring a compact 3.3V regulator
- Educational experiments in voltage regulation
What's in the Box
1 x AMS1117 3.3V power supply module (unsoldered).
Quick specs
- IC Chip
- AMS1117
- Input Voltage (V)
- 4.5 to 12
- Output Voltage
- 3.3
- Max. Operating Current (A)
- 0.8
- Length (mm)
- 26
- Width (mm)
- 12














