Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Arducam, this fpv cameras is a good fit for makers, students and electronics hobbyists. Main specs: item type ToF Camera; resolution 240×180; image size 1/6″.

Key Highlights

  • Item Type: ToF Camera
  • Resolution: 240×180
  • Image Size: 1/6″

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeToF Camera
Resolution240×180
Image Size1/6″
Max. Frame Rate (sensor)120fps
Raspberry Pi OSBullseye (32-bit/64-bit) 01/28/22 or later releases
TDP3.5W Power supply for Pi should be at least 5V/4A
Modulation frequency75MHz/37.5MHz
Viewing Angle (Deg.)70° Diagonal
Measurement Distance (m)Far Mode: 4m Near Mode: 2m
Light Source940nm VCSEL illuminator
InterfaceMIPI (2-Lane)
Output Format4-phases RAW Frame, Depth Frame, Grayscale Amplitude Frame
Shipping Weight0.016 kg
Shipping Dimensions7 × 5 × 2 cm

Overview

The Arducam Time of Flight Camera for Raspberry Pi, made by Arducam, is listed in our fpv cameras range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: ToF Camera (resolution is one factor; lens and lighting matter as much)
  • Resolution: 240×180
  • Image Size: 1/6″ (measure your mounting space before ordering)
  • Max. Frame Rate (sensor): 120fps
  • Raspberry Pi OS: Bullseye (32-bit/64-bit) 01/28/22 or later releases
  • TDP: 3.5W Power supply for Pi should be at least 5V/4A
  • Modulation frequency: 75MHz/37.5MHz (make sure the rest of your system works at this frequency)
  • Viewing Angle (Deg.): 70° Diagonal

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

ToF stands for “Time of Flight”. A ToF Camera emits modulated lights (CW method) and uses the time it takes for the said lights to be reflected back to measure the distance/depth info of any given object/scene, and you can obtain depth data (X,Y & Z coordinate position) in every pixel. Light travel is calculated with d=C/2f, where C is the speed of light and f is the modulation frequency.You are not just getting another camera module, you are getting an entire solution exclusively built and optimized for Raspberry Pi (30 fps on Pi 4 & CM4.*), a dedicated package deal that will give you a head start for computer vision at the edge, a small yet powerful tool ready to take on some big jobs.

Features:

  1. Making 3D Imaging Easier and Affordable
  2. 2M or 4M,  With Cable Extension
  3. From 2D to 3D, It’s Fully Customizable

Package Includes:

1 x Arducam Time of Flight Camera for Raspberry Pi

Quick specs

Item Type
ToF Camera
Resolution
240×180
Image Size
1/6″
Max. Frame Rate (sensor)
120fps
Raspberry Pi OS
Bullseye (32-bit/64-bit) 01/28/22 or later releases
TDP
3.5W Power supply for Pi should be at least 5V/4A
See all specifications