
1 / 4 · Click to enlarge
At a glance
Made by BIGTREETECH, this 3d printer display and controller is a good fit for 3D printing users. Main specs: item type Controller Board; compatibility EZ Specific Driver Series; input voltage (vdc) 12–24. Check that your power source supplies 12–24 before connecting it.
Key Highlights
- Item Type: Controller Board
- Compatibility: EZ Specific Driver Series
- Input Voltage (VDC): 12–24
Ideal For
- Upgrading or repairing a 3D printer
- Spare parts for long prints
- Testing new materials
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Controller Board |
|---|---|
| Compatibility | EZ Specific Driver Series |
| Input Voltage (VDC) | 12–24 |
| Microcontroller | STM32H723ZET6 |
| MCU Type | ARM Cortex-M7 STM32H723ZET6 550 MHz |
| Logic Voltage (V) | DC3.3 V |
| Communication Interface | USB Type-C |
| Length (mm) | 160 |
| Width (mm) | 100 |
| Weight (g) | 175 |
| Shipping Weight | 0.3 kg |
| Shipping Dimensions | 21 × 14 × 5 cm |
Overview
The BIGTREETECH BTT Octopus Max EZ for 3D Printer, made by BIGTREETECH, is listed in our 3d printer display and controller range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Controller Board
- Compatibility: EZ Specific Driver Series
- Input Voltage (VDC): 12–24 (match this to your power supply; too high a voltage can damage the part)
- Microcontroller: STM32H723ZET6 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- MCU Type: ARM Cortex-M7 STM32H723ZET6 550 MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Logic Voltage (V): DC3.3 V (match this to your power supply; too high a voltage can damage the part)
- Communication Interface: USB Type-C (confirm your cable or board uses the same connector)
- Length (mm): 160 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
BIGTREETECH Octopus MAX EZ, a 32-bit motherboard, is an upgraded version of Octopus Pro developed by the 3D printing team of BTT Its self-developed stepper motor sockets enhance safety and user experience, and it adds a series of features that Octopus Pro does not have, greatly enhancing its DIY capabilities. BIGTREETECH's Octopus Max EZ is a 32-bit motherboard with many interfaces for versatile upgrade possibilities. The main board is compatible with Klipper and Marlin as well as with a Raspberry Pi.
BIGTREETECH BTT Octopus Max EZ meets the normal operating requirements, but besides these, it also supports various improvements such as upgrading to a dual extruder or running the EZ-MAX31865. It also serves as a replacement in case of a burned-out driver port. The main board is equipped with fail-safe EZ drivers, and has a protected chip and a pinless design, making it extra safe to use.The 32-bit 550MHz ARM Cortex-M7 STM32H723ZET6 microcontroller is compatible with both Marlin and Klipper.
Note: Refer to Manual in the ATTACHMENTS section for more info. regd. the product.
Features:
- 10 driver ports for versatile applications
- PS5450-5A enables direct power supply with a Raspberry Pi
- eFuse for a fast response and precise protection
- CNC fan voltage is freely selectable between 5, 12 and 24 V
- 3 x 4 pins fan port designed for water cooling
- 550MHz ARM Cortex-M7 STM32H723ZET6
Package Includes:
1 x BIGTREETECH BTT Octopus Max EZ for 3D Printer
1 x DIY Crimp Terminal Set
20 x 2.54mm Black Jumper
20 x 2.0mm Black Jumper
1 x 50cm USB2.0 Type-C Data Cable
Quick specs
- Item Type
- Controller Board
- Compatibility
- EZ Specific Driver Series
- Input Voltage (VDC)
- 12–24
- Microcontroller
- STM32H723ZET6
- MCU Type
- ARM Cortex-M7 STM32H723ZET6 550 MHz
- Logic Voltage (V)
- DC3.3 V


















