
1 / 4 · Click to enlarge
AI Summary
The BIGTREETECH Relay V1.2 automatically shuts down your 3D printer after printing, saving energy and reducing fire risk. It also includes short circuit detection to protect your motherboard.
Key Highlights
- Automatically cuts AC power after printing completes
- Built-in short circuit detection for 5V protection
- Wide AC input range: 85-265V
- Logic voltage 3.3-5V for easy integration
- Compact size: 80 x 35 x 18 mm
- Compatible with CR-10, Delta, and SKR V1.3
Ideal For
- 3D printer owners using CR-10 or Delta printers
- Makers with SKR V1.3 control boards
- Users wanting automatic power-off after printing
- Anyone seeking added short circuit protection
- Energy-conscious hobbyists
Buying Tip
Check that your printer's total current draw does not exceed the 10A rating of this module before purchasing.
Elecvora expert review
Our verdict
The BIGTREETECH Relay V1.2 is a practical safety and convenience upgrade for 3D printers. It adds automatic shutdown and short circuit protection, though it requires basic wiring skills and careful adherence to current limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Automates power-off after printing
- Includes short circuit detection
- Wide AC input range
- Compact and lightweight
Cons
- Requires wiring into AC mains
- Limited to 10A load
- No enclosure included
Best for
3D printer owners with basic electrical skills
Not ideal for
Printers drawing more than 10A or users uncomfortable with mains wiring
Specifications
| AC Input Voltage (V) | 85V-265V, 85 -265 |
|---|---|
| Item Type | Automatic Shutdown Module |
| Compatibility | CR-10, Delta printers, SKR V1.3 |
| Length (mm) | 80 |
| Weight (g) | 50 |
| Logic Voltage (V) | 3.3V-5V |
| Rated Current (A) | 10 |
| Width (mm) | 35 |
| Input Voltage (VDC) | 3.3-5 |
| Dimensions (L x W x H) mm | 80 x 35 x 18 |
| Current (A) | 10A |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 15 × 10 × 2 cm |
What's in the box
- 1 x BIGTREETECH Relay V1.2 Automatic Shutdown Module
- 1 x Connector cable
Frequently Asked Questions
How does the automatic shutdown work?
Is it compatible with my printer?
What is the purpose of the short circuit detection?
What voltage does the module require?
What is included in the package?
Can I use this with a 24V printer?
Overview
The BIGTREETECH Relay V1.2 is an automatic shutdown module for 3D printers. It sits between your printer's mainboard and the AC power supply, cutting off power once a print job finishes. This prevents the printer from idling unnecessarily, saving electricity and reducing the risk of unattended operation. The V1.2 version adds a small MCU for more reliable control and a short circuit detection circuit that immediately powers off if a 5V short is detected, safeguarding your mainboard.
Key Features
- Automatic shutdown: Cuts AC power after printing, saving energy and enhancing safety.
- Short circuit protection: Detects 5V shorts and powers off instantly to prevent damage.
- Wide AC input: Works with 85-265V AC, suitable for various regions.
- Logic voltage flexibility: Accepts 3.3-5V DC for compatibility with many control boards.
- Compact design: Measures 80 x 35 x 18 mm and weighs only 50 g.
Specifications Explained
The 10A rated current means the module can handle printers drawing up to 10 amperes at the specified AC voltage, which covers many desktop 3D printers. The AC input range of 85-265V accommodates standard mains voltages worldwide. The logic voltage of 3.3-5V ensures it can be triggered by common 3D printer mainboards. Its small footprint allows easy installation inside the printer's electronics enclosure.
Compatibility and Requirements
The module is compatible with CR-10, Delta printers, and SKR V1.3 boards. It requires a 3.3-5V logic signal from the mainboard and an AC power source within the 85-265V range. Ensure your printer's current draw does not exceed the 10A rating.
Typical Uses
Ideal for makers who want to automate power-off after long prints, reduce standby energy use, and add a layer of safety against short circuits. It is particularly useful for printers that are left unattended during long jobs.
What's in the Box
Package includes one BIGTREETECH Relay V1.2 module and one connector cable.
Quick specs
- AC Input Voltage (V)
- 85V-265V, 85 -265
- Item Type
- Automatic Shutdown Module
- Compatibility
- CR-10, Delta printers, SKR V1.3
- Length (mm)
- 80
- Weight (g)
- 50
- Logic Voltage (V)
- 3.3V-5V


















