Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by BIGTREETECH, this 3d printer display and controller is a good fit for 3D printing users. Main specs: item type Controller Board; compatibility TMC Specific Driver Series; input voltage (vdc) 12–24. Check that your power source supplies 12–24 before connecting it.

Key Highlights

  • Item Type: Controller Board
  • Compatibility: TMC Specific Driver Series
  • Input Voltage (VDC): 12–24

Ideal For

  • Upgrading or repairing a 3D printer
  • Spare parts for long prints
  • Testing new materials

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeController Board
CompatibilityTMC Specific Driver Series
Input Voltage (VDC)12–24
MicrocontrollerARM Cortex M3
Logic Voltage (V)DC3.3V
Driver Working ModeSPI, UART, STEP/DIR
Motor driver interfaceX, Y, Z, E0, E1 five (each has reextend able interface)
Length (mm)110
Width (mm)82
Weight (g)90
Shipping Weight0.16 kg
Shipping Dimensions14 × 12.5 × 3.5 cm

Overview

The BIGTREETECH BTT SKR V1.4 Control Board for 3D Printer, made by BIGTREETECH, is listed in our 3d printer display and controller range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Controller Board
  • Compatibility: TMC Specific Driver Series
  • Input Voltage (VDC): 12–24 (match this to your power supply; too high a voltage can damage the part)
  • Microcontroller: ARM Cortex M3 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Logic Voltage (V): DC3.3V (match this to your power supply; too high a voltage can damage the part)
  • Driver Working Mode: SPI, UART, STEP/DIR
  • Motor driver interface: X, Y, Z, E0, E1 five (each has reextend able interface) (confirm your cable or board uses the same connector)
  • Length (mm): 110 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a BIGTREETECH BTT SKR V1.4 Control Board for 3D Printer. Motherboard SKR V1.4 board from Bigtreetech 32 Bit for 3D Printer. Using the 32 bit main frequency 100 MHz arm level cortex M3-series, LPC1768 main control chip the performance has improved. It is equipped with highly modular and open source firmware marlin 2.0 which is very convenient for users. The controller board is responsible for the electronic functioning of a 3D printer.

Without a controller board, a 3D printer wouldn’t really be able to do anything except turn certain components on and off at the manual flick of a switch. BIGTREETECH SKR V1.4 Control Board  handle all the logic, such as parsing g-code files, regulating temperature, and moving motors. The last action is particularly computationally and electrically substantial since we’re talking about stepper motors. First of all, it’s a 32-bit board — compared to something like the RAMPS or RAMBo, which are 8-bit boards. But the power gains don’t stop there because this 3D printer controller board boasts a 120-MHz processor, which is leaps ahead of the older ATMega chips that only clock 8 MHz.

Note: Actual product may vary in color. Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.


Features:

  1. Reserved I2C, SPI, WIFI interfaces, convenient for customers to DIY
  2. Reserved closed-loop drive interface, eliminating the trouble of plug-in transfer module
  3. Dual Z-axis interface, eliminating the trouble of external drive expansion module
  4.  The thermistor interface is protected by a bile capacitor pressure sensitive resistor to enhance the resistance of the interface
  5. More fan interfaces: 1 digitally controlled fan, 3 normally open fans
  6.  External DC5V power module can be plugged in to supply power to TFT screen, BLtouch, Neopixel

Package Includes:

1 x BIGTREETECH SKR V1.4 Control Board

1 x 50 cm USB Cable

Quick specs

Item Type
Controller Board
Compatibility
TMC Specific Driver Series
Input Voltage (VDC)
12–24
Microcontroller
ARM Cortex M3
Logic Voltage (V)
DC3.3V
Driver Working Mode
SPI, UART, STEP/DIR
See all specifications