
1 / 3 · Click to enlarge
At a glance
Made by BIGTREETECH, this 3d printer display and controller is a good fit for 3D printing users. Main specs: item type Controller Board; compatibility TMC Specific Driver Series; input voltage (vdc) 12–24. Check that your power source supplies 12–24 before connecting it.
Key Highlights
- Item Type: Controller Board
- Compatibility: TMC Specific Driver Series
- Input Voltage (VDC): 12–24
Ideal For
- Upgrading or repairing a 3D printer
- Spare parts for long prints
- Testing new materials
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Controller Board |
|---|---|
| Compatibility | TMC Specific Driver Series |
| Input Voltage (VDC) | 12–24 |
| Logic Voltage (V) | 3.3 V |
| Microcontroller | ARM Cortex M3 |
| Clock Frequency | 120 MHz |
| Supported | Printer Type XYZ, Delta, Kossel, Ultimaker, CoreXY, (according to motion kinematics) |
| Length (mm) | 110 |
| Width (mm) | 84 |
| Weight (g) | 88 |
| Shipping Weight | 0.165 kg |
| Shipping Dimensions | 14 × 12.5 × 3.5 cm |
Overview
The BIGTREETECH BTT SKR V1.4 Turbo Control Board for 3D Printer, made by BIGTREETECH, is listed in our 3d printer display and controller range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Controller Board
- Compatibility: TMC Specific Driver Series
- Input Voltage (VDC): 12–24 (match this to your power supply; too high a voltage can damage the part)
- Logic Voltage (V): 3.3 V (match this to your power supply; too high a voltage can damage the part)
- Microcontroller: ARM Cortex M3 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Clock Frequency: 120 MHz (make sure the rest of your system works at this frequency)
- Supported: Printer Type XYZ, Delta, Kossel, Ultimaker, CoreXY, (according to motion kinematics) (confirm your cable or board uses the same connector)
- Length (mm): 110 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a BIGTREETECH BTT SKR V1.4 Turbo Control Board for 3D Printer . Using the 32 bit main frequency 100 MHz arm level cortex M3-series, LPC1768 main control chip the performance has improved. It is equipped with highly modular and open source firmware marlin 2.0 which is very convenient for users. The controller board is responsible for the electronic functioning of a 3D printer.
Without a controller board, a 3D printer wouldn’t really be able to do anything except turn certain components on and off at the manual flick of a switch. 3D printer controller boards handle all the logic, such as parsing g-code files, regulating temperature, and moving motors. The last action is particularly computationally and electrically substantial since we’re talking about stepper motors. First of all, this BIGTREETECH SKR V1.4 Turbo Control Board is a 32-bit board — compared to something like the RAMPS or RAMBo, which are 8-bit boards. But the power gains don’t stop there because this 3D printer controller board boasts a 120-MHz processor, which is leaps ahead of the older ATMega chips that only clock 8 MHz.
Features:
1) Adopt high-performance MOSFET tube, better heat dissipation effect; 2) The use of pluggable fuses makes the replacement process easier; 3) Reserve BLTouch interface SERVOS and Probe for easy use of BL Touch; 4) RGB light bar supporting Neopixel scheme; 5) Use the power selection design to separate the USB power supply from the switching power supply, effectively avoiding short circuit Causes the computer's USB port to be burned; 6) The special function interface uses conspicuous pin headers, which greatly reduces the error rate of wiring. 7) Reserved I2C, SPI, WIFI interfaces, convenient for customers to DIY
Package Includes:
1 x BIGTREETECH SKR V1.4 Turbo Control Board
1 x 50 cm USB cable
Quick specs
- Item Type
- Controller Board
- Compatibility
- TMC Specific Driver Series
- Input Voltage (VDC)
- 12–24
- Logic Voltage (V)
- 3.3 V
- Microcontroller
- ARM Cortex M3
- Clock Frequency
- 120 MHz


















