Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by BROADCOM, this current and voltage sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: no. of amplifiers 1; isolation type Optical; isolation voltage 5kV. Check that your power source supplies 3 to 5.5 before connecting it.

Key Highlights

  • No. of Amplifiers: 1
  • Isolation Type: Optical
  • Isolation Voltage: 5kV

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3 to 5.5
No. of Amplifiers1
Isolation TypeOptical
Isolation Voltage5kV
Gain Bandwidth Product (GBP)100kHz
No. of Pins8
Shipping Weight0.01 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The BROADCOM ACPL-C870-000E Isolation Amplifier-ACPL-C870-000E, Optically, 1 Amplifiers, 5 kV, 3V to 5.5V, SOIC, 8 Pins, 100 kHz, made by BROADCOM, is listed in our current and voltage sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • No. of Amplifiers: 1 (your supply must deliver at least this much current)
  • Isolation Type: Optical
  • Isolation Voltage: 5kV (match this to your power supply; too high a voltage can damage the part)
  • Gain Bandwidth Product (GBP): 100kHz (make sure the rest of your system works at this frequency)
  • No. of Pins: 8
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 7 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The ACPL-C870-000E is a precision optically isolated voltage sensor in 8 pin SSO package. This voltage sensor is an optical isolation amplifier designed specifically for voltage sensing. Its 2V input range and high 1Gohm input impedance makes it well suited for isolated voltage sensing requirements in electronic power converters applications. A resistive voltage divider is used to scale DC link voltage to suit input range of voltage sensor. A differential output voltage that is proportional to input voltage is created on other side of optical isolation barrier. The ACPL-C870 operates from single 5V supply and provides excellent linearity. An active high shutdown pin is available which reduces IDD1 current to only 15mA making them suitable for battery powered and other power sensitive applications. The high common mode transient immunity (15KV/µs) of ACPL-C870 provides precision and stability needed to accurately monitor DC link voltage in high noise environments.


Features:

  1. Advanced sigma delta (Σ-D) modulation technology
  2. Nominal input range from 0V to 2V
  3. Low gain drift of -35ppm/°C
  4. Offset voltage drift of 21mV/°C
  5. 0.1% (maximum) non linearity
  6. Active high shutdown pin
  7. 100KHz wide bandwidth
  8. Wide supply range from 3V to 5.5V for output side
  9. IEC/EN/DIN EN 60747-5-5, UL 1577, CSA approved
  10. Operating temperature range from -40°C to 105°C

Package Includes:

1 x BROADCOM ACPL-C870-000E Isolation Amplifier-ACPL-C870-000E, Optically, 1 Amplifiers, 5 kV, 3V to 5.5V, SOIC, 8 Pins, 100 kHz

Quick specs

Operating Voltage (V)
3 to 5.5
No. of Amplifiers
1
Isolation Type
Optical
Isolation Voltage
5kV
Gain Bandwidth Product (GBP)
100kHz
No. of Pins
8
See all specifications