Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by BROADCOM, this amplifier and comparator ic is a good fit for everyday home and hobby use. Main specs: manufacturer BROADCOM; no. of pins 8; mounting type Through Hole. Check that your power source supplies 4.5 to 5.5 before connecting it.

Key Highlights

  • Manufacturer: BROADCOM
  • No. of Pins: 8
  • Mounting Type: Through Hole

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerBROADCOM
No. of Pins8
Mounting TypeThrough Hole
Operating Temperature (°C)-40 to 85
Supply Voltage4.5 to 5.5
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The HCPL-7840-300E-BROADCOM -Optocoupler, Optically Isolated Amplifiers, 1 Channel, Surface Mount DIP, 8 Pins, 3.75 kV, 100 kHz, made by BROADCOM, is listed in our amplifier and comparator ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: BROADCOM
  • No. of Pins: 8
  • Mounting Type: Through Hole
  • Operating Temperature (°C): -40 to 85
  • Supply Voltage: 4.5 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Broadcom® HCPL-7840 isolation amplifier family is designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the HCPL-7840. A differential output voltage is created on the other side of the HCPL-7840 optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7840 was designed to ignore very high common-mode transient slew rates (of at least 10 kV/μs).

Applications:

  1. Motor phase and rail current sensing
  2. Inverter current sensing
  3. Switched mode power supply signal isolation
  4. General-purpose current sensing and monitoring
  5. General-purpose analog signal isolation

Features:

  1. 15 kV/μs common-mode rejection at VCM = 1000V
  2. Compact, auto-insertable standard 8-pin DIP package
  3. 0.00025V/V/°C gain drift vs. temperature
  4. 0.3-mV input offset voltage
  5. 100-kHz bandwidth
  6. Advanced Sigma-Delta (Σ-Δ) A/D converter technology
  7. Fully differential circuit topology
  8. 0.8-μm CMOS IC technology

Package Includes:

1 x HCPL-7840-300E-BROADCOM -Optocoupler, Optically Isolated Amplifiers, 1 Channel, Surface Mount DIP, 8 Pins, 3.75 kV, 100 kHz

Quick specs

Manufacturer
BROADCOM
No. of Pins
8
Mounting Type
Through Hole
Operating Temperature (°C)
-40 to 85
Supply Voltage
4.5 to 5.5
Shipping Weight
0.001 kg
See all specifications