Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 125 x 75 x 2 mm carbon fiber plate with a 3K glossy twill finish, weighing only 31 g. Its layered construction gives consistent strength through the thickness, ideal for custom drone frames, RC chassis and brackets.

Key Highlights

  • 125 x 75 x 2 mm plate weighing just 31 g
  • 3K glossy twill surface for a clean finished look
  • Layered carbon fiber and resin construction throughout
  • Density of 1.5 for a stiff, lightweight structural part
  • Glass transition temperature of 200°C for warmer environments
  • Suitable for cutting, drilling and shaping into custom parts

Ideal For

  • FPV and RC hobbyists building custom drone frames
  • RC car builders making chassis plates and firewalls
  • Makers designing lightweight brackets and bulkheads
  • Model builders needing a stiff, thin structural panel
  • Hobbyists repairing or reinforcing small RC components

Buying Tip

Measure your intended part and plan your cuts before drilling, since the plate is only 125 x 75 mm and there is little room for error.

Elecvora expert review

Our verdict

A well-finished, lightweight carbon plate that is a sensible choice for small custom structural parts where 2 mm thickness is enough. It is a raw material, so the final result depends on your cutting and drilling skill.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clean 3K glossy twill appearance
  • Light 31 g weight for its size
  • Consistent layered construction through the thickness
  • Stable up to a 200°C glass transition temperature

Cons

  • Only 125 x 75 mm, so larger parts require multiple plates
  • No pre-drilled holes or finished edges
  • Carbon fiber dust requires careful cutting and respiratory protection

Best for

Small drone frames, RC chassis plates and custom lightweight brackets

Not ideal for

Large structural panels or parts needing pre-drilled mounting holes

Specifications

Item TypeSheet Plate
Material finish3K glossy twill surface
Density1.5
Glass Transition Temperature200°C
Thickness (mm)2
Length (mm)125
Width (mm)75
Weight (g)31
Shipping Weight0.03 kg
Shipping Dimensions13 × 7 × 2 cm

What's in the box

  • 1 x Carbon Fiber Sheet Plate 125 mm x 75 mm x 2 mm

Frequently Asked Questions

What is this carbon fiber plate made of?
It is made from layered carbon fiber and resin with a 3K glossy twill surface finish. The construction is consistent through the 2 mm thickness.
Can I cut and drill this sheet?
Yes, it is a raw material intended for cutting and drilling. Use sharp tools for carbon fiber, work at low speed and wear appropriate respiratory protection because the dust is harmful.
Does it come with mounting holes?
No, the plate is supplied as a plain sheet with no holes, inserts or cut shapes. You will need to drill and shape it for your project.
What is the maximum temperature it can handle?
The glass transition temperature is 200°C, which indicates the resin is intended for use in relatively warm conditions. Avoid prolonged exposure beyond that point.
Is this plate suitable for drone frames?
Yes, the 2 mm thickness and 31 g weight make it useful for small drone frame plates and similar lightweight structural parts, provided the size fits your design.
How should I store and care for it?
Keep the plate flat and dry, and store it away from sharp objects that could scratch the glossy surface. Sand cut edges and seal them if the part will be exposed to moisture.

Overview

This carbon fiber sheet plate is a compact, lightweight panel measuring 125 mm long, 75 mm wide and 2 mm thick. At only 31 g, it offers a useful balance of stiffness and low weight for small structural parts, brackets and custom builds. The 3K glossy twill finish gives the surface a visible woven pattern and a smooth appearance, so it can be used either as a hidden structural panel or as a visible component in a finished build.

Key Features

  • 3K glossy twill surface with a clear woven appearance
  • Layered carbon fiber and resin construction through the full thickness
  • Density of 1.5 for a stiff, lightweight plate
  • Glass transition temperature of 200°C
  • Compact 125 x 75 mm footprint and 2 mm thickness
  • Weighs approximately 31 g

Specifications Explained

Size and thickness

The 125 x 75 mm size is small enough to fit into tight spaces but large enough to cut several smaller parts from one plate. At 2 mm thick, the sheet is stiff enough for flat structural panels while remaining easy to work with hand tools. Because the plate is only 2 mm thick, plan bends, folds or reinforcements carefully if your design carries heavy loads.

Weight and density

At 31 g and with a density of 1.5, this plate is intended for builds where every gram counts. The low weight makes it suitable for small flying models and lightweight RC projects where added mass affects handling and performance.

Surface and construction

The 3K glossy twill finish is a cosmetic and practical feature, giving a smooth, woven look. The plate is built from layered carbon fiber and resin rather than a light core sandwiched between two thin skins, so the material properties are consistent through the thickness.

Heat performance

A glass transition temperature of 200°C indicates the resin system is intended to remain stable in relatively warm conditions. This is useful to know when choosing mounting locations or planning any heat-generating components nearby.

Compatibility and Requirements

This is a raw material plate, not a finished, pre-drilled part. It has no mounting holes, threaded inserts or pre-cut shapes, so you will need your own tools to cut, drill and finish it. There are no electrical ratings, voltage requirements or controller compatibility details because the product is a structural sheet. Any fasteners, adhesives or coatings you use should be selected to suit carbon fiber and your specific application.

Typical Uses

Common applications include drone and RC frame plates, car chassis parts, firewalls, bulkheads, brackets, reinforcement plates and custom enclosures. It is also useful for hobby robotics, model making and general fabrication where a thin, stiff panel is needed.

What's in the Box

1 x Carbon Fiber Sheet Plate 125 mm x 75 mm x 2 mm.

Quick specs

Item Type
Sheet Plate
Material finish
3K glossy twill surface
Density
1.5
Glass Transition Temperature
200°C
Thickness (mm)
2
Length (mm)
125
See all specifications