Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 300 x 200 x 3 mm plate made from layered 3K plain weave carbon fiber with a matt finish on both sides. It gives you a stiff, lightweight panel that keeps its strength through the full thickness, ideal for cutting custom drone and RC parts.

Key Highlights

  • 300 x 200 x 3 mm flat plate for custom cutting and drilling
  • Layered 3K plain weave carbon fiber through the full thickness
  • Matt surface finish on both faces
  • High tensile strength with low weight for its size
  • Resists ultraviolet light, ageing and corrosion
  • Suitable for drone frames, chassis plates and bulkheads

Ideal For

  • FPV and multirotor builders cutting their own frame plates
  • RC car and buggy hobbyists making chassis plates and firewalls
  • Model engineers needing a stiff, lightweight panel
  • Makers building custom brackets and reinforcement parts
  • Hobbyists replacing metal panels with lighter carbon fiber

Buying Tip

Mark your cut lines and drill locations before cutting, and use a fine-tooth blade or abrasive disc at low speed to avoid splintering the edges.

Elecvora expert review

Our verdict

A straightforward, well-made carbon plate that gives you consistent material through the full 3 mm thickness, which is exactly what you want when drilling and cutting custom parts. It is a sensible stock item for anyone who builds and repairs drone or RC structures.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Consistent layered construction through the thickness
  • Matt finish on both sides ready for bonding or painting
  • Good stiffness-to-weight ratio at 3 mm
  • Resists corrosion and UV exposure

Cons

  • Requires your own cutting and drilling tools
  • Carbon fiber dust needs proper protection and cleanup
  • Edges may need sealing after cutting

Best for

Builders who cut their own drone, RC and model parts

Not ideal for

Anyone wanting a pre-cut, finished component

Specifications

Item TypeSheet Plate
Thickness (mm)3
Dimensions (L x W x H) mm300 x 200 x 3
Shipping Weight0.18 kg
Shipping Dimensions30 × 20 × 0.3 cm

What's in the box

  • 1 x Carbon fiber Sheet plate 300mm * 200mm * 3mm

Frequently Asked Questions

What is this plate made of?
It is made from 100% 3K plain weave carbon fiber laid up in layers with resin, with a matt finish on both sides.
Can I cut and drill it at home?
Yes. It can be cut with a fine-tooth saw or rotary tool and drilled with standard bits, but work slowly and wear eye protection, gloves and a dust mask.
Is it strong all the way through?
Yes. The plate is built from layered carbon fiber and resin rather than thin skins over a core, so the strength is consistent through the 3 mm thickness.
What is included in the package?
One carbon fiber sheet plate measuring 300 x 200 x 3 mm.
Does it need any electrical connection?
No. It is a passive structural material with no wiring or power requirement.
How should I store it?
Keep it flat and dry, away from heavy objects that could bend or scratch it, until you are ready to cut your parts.

Overview

This carbon fiber sheet plate measures 300 x 200 mm and is 3 mm thick, giving you a flat panel for parts you design and cut yourself. It is made from 100% 3K plain weave carbon fiber, laid up in layers with resin rather than built around a lower-density core. That construction means the plate behaves consistently through its thickness, so edges and drilled holes hold up the same way the faces do.

Both sides carry a matt finish, which keeps glare down and gives a clean look on visible parts. The plate is light for its size and stiff, which is why carbon fiber is used where metal panels would add unnecessary mass.

Key Features

  • Layered carbon construction: multiple sheets of carbon fiber and resin through the full 3 mm section.
  • 3K plain weave: a familiar, even weave pattern across the surface.
  • Matt finish both sides: no glossy face to sand before bonding or painting.
  • Corrosion and UV resistance: suited to outdoor and long-term hobby use.
  • Workable size: large enough for several small parts or one larger plate.

Specifications Explained

300 x 200 x 3 mm

The length and width give you a generous working area for marking out brackets, arms, plates and panels. The 3 mm thickness is the practical middle ground: stiff enough to resist flex in structural parts, yet thin enough to cut with hand tools or a rotary tool and to keep overall weight low.

Layered 3K plain weave

Because the carbon fiber runs in layers through the plate instead of sitting as thin skins over a core, the material at the cut edge and around fasteners is the same as the surface. That matters when you drill mounting holes or shape narrow tabs.

Weight

The plate has a shipping weight of 0.18 kg, so it adds very little mass to a build while providing real rigidity.

Compatibility and Requirements

This is a raw material, not a finished component, so there is no electrical compatibility to check. You will need your own cutting tools, drill bits, files and abrasives to shape it, plus appropriate personal protection when machining carbon fiber. Plan your layout before cutting, since offcuts limit what you can make next.

Typical Uses

  • Drone and FPV frame plates, arms and top or bottom decks
  • RC car chassis plates, firewalls and bulkheads
  • Custom brackets, mounting plates and reinforcement panels
  • Hobby and model engineering projects needing a stiff, light sheet

What's in the Box

1 x Carbon fiber Sheet plate 300mm * 200mm * 3mm

Quick specs

Item Type
Sheet Plate
Thickness (mm)
3
Dimensions (L x W x H) mm
300 x 200 x 3
Shipping Weight
0.18 kg
Shipping Dimensions
30 × 20 × 0.3 cm
See all specifications