Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 16-channel multiplexer/demultiplexer breakout that lets you route one common signal to any of sixteen channels using four address lines. It works with both analog and digital signals up to VCC, making it ideal for expanding sensor inputs or serial lines.

Key Highlights

  • 16 channels controlled by 4 digital address lines
  • Bidirectional analog and digital signal routing
  • Wide 2 to 6 VDC operating voltage range
  • Low 70 Ohm on-resistance at 4.5V
  • Break-before-make switching prevents crosstalk
  • Compact 40 x 18 mm PCB weighs only 3 g

Ideal For

  • Makers expanding sensor inputs on Arduino or Raspberry Pi
  • Students learning multiplexing and signal routing
  • Electronics hobbyists building multi-sensor data loggers
  • Engineers prototyping serial or logic signal selection

Buying Tip

Remember that the module ships with unsoldered headers, so add a soldering iron and headers to your order if you need plug-in breadboard compatibility.

Elecvora expert review

Our verdict

A practical, low-cost breakout that simplifies adding many analog or digital signals to a microcontroller. The wide voltage range and bidirectional switches make it flexible for both hobby and light industrial projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple 5-pin control for 16 channels
  • Works with both analog and digital signals
  • Bidirectional routing saves extra hardware
  • Enable pin allows full disconnect
  • Compact and lightweight board

Cons

  • Headers are unsoldered and require soldering
  • On-resistance of 70 Ohms may affect precision analog measurements
  • No onboard voltage regulation or level shifting

Best for

Makers and engineers needing to expand I/O for sensor arrays or signal routing

Not ideal for

Projects requiring high-precision analog switching or high-current signal paths

Specifications

No. of Channels16
Model No. / NameCD74HC4067
Operating Voltage (VDC)2 to 6
Operating Temperature (°C)-55 to 125
PCB Size ( L x W ) mm40 x 18
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions9 × 7 × 5 cm

What's in the box

  • 1 x CD74HC4067 High-Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module (unsoldered)

Frequently Asked Questions

How many microcontroller pins does the module need?
It requires four digital outputs for the address lines (S0–S3) plus one connection to the common SIG pin. The enable pin is optional if you want to disconnect all channels.
Can I use it with 3.3V and 5V systems?
Yes, the operating voltage range is 2 to 6 VDC, so it works with both 3.3V and 5V logic. Just make sure any signal voltage on the channel pins stays between ground and VCC.
Does it work with both analog and digital signals?
Yes, the internal switches are bidirectional and pass both analog voltages and digital logic levels up to VCC.
What is included in the package?
The package includes one CD74HC4067 breakout module with unsoldered headers. No cables or other accessories are included.
Can I connect multiple modules together?
Yes, you can use several boards to create larger switching arrangements, for example for I2C or SPI routing. Each board needs its own address lines and enable control.
How should I care for the module?
Store it in a dry place and avoid exposing it to voltages above VCC or below ground. The board is rated for -55 to 125°C, but handle it with standard ESD precautions.

Overview

The CD74HC4067 breakout board brings the versatile 16-channel CMOS multiplexer/demultiplexer to your breadboard or project enclosure. Think of it as a digitally controlled rotary switch: a single common pin (SIG) can be connected to any one of sixteen channel pins (CHANxx) by sending a 4-bit binary address to the S0–S3 select pins. Because the internal switches are bidirectional, the same board can route signals into or out of your microcontroller, and it handles both analog voltages and digital logic levels as long as they stay between ground and VCC.

Key Features

  • 16 channels from 5 pins: Four address lines plus one common signal give you sixteen selectable paths, saving valuable I/O on your MCU.
  • Analog and digital compatible: Route sensor voltages or TTL-level serial data through the same module.
  • Bidirectional operation: Use it to multiplex inputs or demultiplex outputs without changing hardware.
  • Enable pin: Drive the enable input high to disconnect all channels from the common pin for a clean off state.
  • Break-before-make switching: The 6 ns break-before-make action at 4.5V helps prevent crosstalk between channels.
  • Low on-resistance: 70 Ohms at 4.5V keeps signal loss modest for many sensor and logic applications.

Specifications Explained

16 channels means you can attach up to sixteen separate signals to one board. The 2 to 6 VDC operating range covers common 3.3V and 5V logic systems, and the signal voltage on any channel must remain within ground and VCC. The -55 to 125°C temperature rating indicates the module is built for demanding environments beyond typical hobby use. The 40 x 18 mm PCB and 3 g weight make it easy to tuck into tight builds, while the 70 Ohm on-resistance and 6 ns break-before-make figures describe the switch behaviour you can expect at 4.5V.

Compatibility and Requirements

The module works with microcontrollers and development boards that provide four digital outputs for channel selection and one analog or digital input/output for the common signal. Your signal levels must not exceed the VCC supply you provide. The board ships with unsoldered headers, so you will need basic soldering tools to attach pins if you plan to use it in a breadboard or with DuPont cables. No additional passive components are required for basic multiplexing.

Typical Uses

  • Expanding a microcontroller's analog inputs to read many sensors in turn.
  • Routing TTL-level serial TX or RX lines between multiple devices.
  • Selecting between multiple digital signals or logic lines.
  • Building signal-switching arrangements for I2C or SPI experiments with multiple boards.
  • Educational projects demonstrating multiplexing and demultiplexing concepts.

What's in the Box

1 x CD74HC4067 High-Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module (unsoldered).

Quick specs

No. of Channels
16
Model No. / Name
CD74HC4067
Operating Voltage (VDC)
2 to 6
Operating Temperature (°C)
-55 to 125
PCB Size ( L x W ) mm
40 x 18
Weight (g)
3
See all specifications