
1 / 3 · Click to enlarge
At a glance
This logic level converter is a good fit for makers, students and electronics hobbyists. Main specs: no. of channels 8; model no. / name CJMCU 4051; supply voltage ± 5. Check that your power source supplies ± 5 before connecting it.
Key Highlights
- No. of Channels: 8
- Model No. / Name: CJMCU 4051
- Supply Voltage: ± 5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| No. of Channels | 8 |
|---|---|
| Model No. / Name | CJMCU 4051 |
| Supply Voltage | ± 5 |
| Length (mm) | 30 |
| Width (mm) | 19 |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
Overview
The CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakout Board for Arduino is listed in our logic level converter range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- No. of Channels: 8
- Model No. / Name: CJMCU 4051 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Supply Voltage: ± 5 (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 30 (measure your mounting space before ordering)
- Width (mm): 19 (measure your mounting space before ordering)
- Weight (g): 3 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 10 × 7 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Sensor Module Breakout Board for Arduino. 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1, and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Pin Description:
Functional Diagram:
Schematic Diagram (one switch):
Specifications and Features :
1.Wide Analog Input Voltage Range: +/-5V 2.Low "ON" Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc = 9.0V 3.Logic Level Translation: to enable 5V to communicate with +/-5V analog signals 4.Board Size: 30 x 19 mmPackage Includes :
1 x 8 Channel Analog Multiplexer Demultiplexer Sensor Module with berg Pins.Quick specs
- No. of Channels
- 8
- Model No. / Name
- CJMCU 4051
- Supply Voltage
- ± 5
- Length (mm)
- 30
- Width (mm)
- 19
- Weight (g)
- 3
















