Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The CJMCU TCA9548A is an 8-channel I2C multiplexer board that lets you connect multiple devices with identical addresses to one bus. It solves address conflicts by switching between eight separate I2C channels on demand.

Key Highlights

  • 8-channel bidirectional I2C multiplexer for resolving address conflicts
  • Default I2C address 0x70, configurable via A0-A2 pins
  • 3-5V logic compatible with common microcontrollers
  • Supports hot insertion and has low standby current
  • Active-low reset input for easy recovery
  • Compact board weighs only 4 grams

Ideal For

  • Arduino and Raspberry Pi enthusiasts expanding I2C sensor networks
  • Electronics hobbyists working with multiple identical sensors
  • Robotics builders needing to manage several I2C devices
  • Students learning about I2C multiplexing and address conflicts
  • Prototypers developing sensor arrays with fixed-address modules

Buying Tip

Check that your downstream I2C devices have their own pull-up resistors, as the multiplexer board does not include them on the switched channels.

Elecvora expert review

Our verdict

A straightforward and reliable solution for I2C address conflicts, the CJMCU TCA9548A is a must-have for projects that need more sensors than the bus allows. Its small size and configurable address make it easy to integrate into existing setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Solves address conflicts for up to eight identical devices
  • Configurable address allows multiple multiplexers on one bus
  • Wide 3-5V logic compatibility
  • Compact and lightweight

Cons

  • Requires software to switch channels before each device access
  • No pull-up resistors on multiplexed channels
  • Headers not pre-soldered, requires soldering for permanent setups

Best for

Makers and engineers needing to connect multiple same-address I2C sensors to a single microcontroller.

Not ideal for

Beginners looking for a plug-and-play solution without any coding or soldering.

Specifications

No. of Channels8
Model No. / NameCJMCU TCA9548A
Weight (g)4
Shipping Weight0.005 kg
Shipping Dimensions4 × 4 × 3 cm

What's in the box

  • 1x CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board

Frequently Asked Questions

How many I2C devices can I connect to this board?
You can connect up to eight devices, one per channel, provided each device has a unique channel assignment. The board itself uses one address on the main bus.
What is the default I2C address of the multiplexer?
The default address is 0x70. You can change it to 0x71–0x77 by connecting the A0, A1, and A2 pins to Vin.
Does the board work with 3.3V and 5V microcontrollers?
Yes, the board supports 3-5V logic. Power it with the same voltage as your microcontroller's logic level.
Are pull-up resistors included on the multiplexed channels?
No, the board does not include pull-up resistors on the switched channels. Ensure your downstream devices have their own pull-ups or add them externally.
What is included in the package?
The package contains one CJMCU TCA9548A development board. Cables, headers, and other accessories are not included.
Can I use multiple multiplexer boards together?
Yes, by setting different addresses via the A0-A2 pins, you can connect multiple boards to the same main I2C bus, each providing eight additional channels.

Overview

The CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board is a small breakout built around the TCA9548A multiplexer chip. It addresses a common problem in I2C projects: many sensors and modules have a fixed I2C address, so you cannot connect two of them to the same SDA/SCL lines without conflict. This board solves that by providing eight separate I2C channels that you can switch between with a simple command. You can connect up to eight devices with identical addresses, then select which channel is active before communicating with a specific device.

Key Features

  • 1-to-8 bidirectional translating switches: route the master I2C bus to any of eight downstream channels.
  • Configurable I2C address: default 0x70, with A0, A1, and A2 pins to set addresses 0x71–0x77 for using multiple multiplexers.
  • 3-5V logic support: power the board with the same voltage as your microcontroller logic level.
  • Hot insertion: devices can be connected or removed while the bus is active.
  • Low standby current: suitable for battery-powered or always-on projects.
  • Active-low reset input: pulled high by default; connect to ground to reset the multiplexer.

Specifications Explained

The number of channels (8) means you can attach up to eight separate I2C buses, each with its own SDA and SCL pins (SD0/SC0 through SD7/SC7). The board itself occupies one address on your main bus, so you can still use other I2C devices alongside it. The address selection pins let you change the multiplexer's own address, which is useful if you need more than eight channels by adding another board. The 3-5V input range covers most hobbyist microcontrollers, and the 5V-tolerant inputs add flexibility when mixing logic levels. With a weight of just 4 grams and compact dimensions, the board fits easily into tight enclosures or wearable projects.

Compatibility and Requirements

The board works with any microcontroller that has an I2C interface and operates at 3V to 5V logic, such as Arduino boards and similar development platforms. You will need to provide power (Vin and GND) and connect SCL and SDA to your microcontroller's I2C pins. No additional libraries are strictly required beyond standard I2C communication, though you may need to write code to select channels. The board does not include pull-up resistors on the multiplexed channels, so check whether your downstream devices have their own pull-ups.

Typical Uses

  • Connecting multiple identical I2C sensors (e.g., temperature, humidity, or distance sensors) to one microcontroller.
  • Expanding the number of I2C devices in robotics or automation projects.
  • Building sensor arrays where each sensor has a fixed address.
  • Prototyping with several I2C modules that share the same address.

What's in the Box

The package includes one CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board. No cables or headers are included unless otherwise stated.

Quick specs

No. of Channels
8
Model No. / Name
CJMCU TCA9548A
Weight (g)
4
Shipping Weight
0.005 kg
Shipping Dimensions
4 × 4 × 3 cm
See all specifications