
1 / 5 · Click to enlarge
AI Summary
A compact DS1302 real time clock module that keeps accurate time and date with a 32.768kHz crystal and CR1220 battery backup. It gives your microcontroller project reliable timekeeping even when main power is switched off.
Key Highlights
- DS1302 RTC IC with 32.768kHz crystal for stable timekeeping
- CR1220 battery maintains the clock when power is removed
- Tracks seconds, minutes, hours, day of month, day of week and year
- Compact 26 x 16mm PCB weighing about 3 grams
- Simple 5-pin interface: VCC, GND, CLK, DAT and RST
- Works from a 5V or 3.3V supply
Ideal For
- Arduino and microcontroller hobbyists adding timekeeping
- Students building clock and calendar display projects
- Makers creating data loggers with timestamps
- Hobbyists automating sprinkler or irrigation schedules
- Anyone building attendance or access logging prototypes
Buying Tip
Check that a CR1220 cell is fitted and seated correctly before relying on backup timekeeping, since the clock only holds its setting while that battery is present.
Elecvora expert review
Our verdict
A simple, low-cost way to add battery-backed timekeeping to a microcontroller project. The small PCB and five-pin interface make it easy to wire, though it is a basic clock rather than a precision time source.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 26 x 16mm board fits tight enclosures
- Battery backup keeps time across power cycles
- Straightforward five-pin wiring
- Tracks full date and day of week
Cons
- Requires a separate CR1220 battery
- Operating range limited to 0 to 80 degrees Celsius
- No temperature compensation mentioned in the specifications
Best for
Hobbyists and students adding basic timekeeping to microcontroller projects
Not ideal for
Applications needing precision timekeeping outside the stated temperature range
Specifications
| Item Type | RTC Module |
|---|---|
| Model No. / Name | DS1302 |
| IC Chip | DS1302 |
| Batteries Required | CR1220 |
| Output Frequency | 32.768KHz |
| Operating Temperature (°C) | 0 to 80 |
| PCB Size ( L x W ) mm | 26 x 16 |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x DS1302 Real Time Clock Module with battery
Frequently Asked Questions
What is the DS1302 module used for?
What voltage does the module need?
Does it keep time when power is off?
What time values can it track?
What is included with the module?
How should I look after the module?
Overview
The DS1302 Real Time Clock Module is a small breakout board that gives your electronics project a dependable sense of time. At its centre is the DS1302 clock IC, paired with a 32.768kHz crystal that provides the timing reference. A CR1220 battery keeps the clock running when the main supply is disconnected, so your project can return to the correct date and time after a power cycle.
The board tracks seconds, minutes, hours, day of month, day of week and year. It is a practical building block for anyone who needs scheduled actions, timestamped readings or a simple clock display without relying on a network connection.
Key Features
- DS1302 real time clock IC on a compact 26 x 16mm PCB
- 32.768kHz crystal oscillator for the clock reference
- CR1220 battery backup keeps time during power loss
- Tracks seconds, minutes, hours, day of month, day of week and year
- Five-pin interface: VCC, GND, CLK, DAT and RST
- Lightweight at roughly 3 grams, easy to mount in small builds
Specifications Explained
Clock IC and crystal
The DS1302 handles the counting and storage of time values, while the 32.768kHz crystal supplies the steady oscillation the IC divides down into one-second ticks. This is the same reference frequency used in many watches, which is why the module behaves much like a small digital watch.
Battery backup
A CR1220 cell powers the clock only when main power is off. That means your project does not lose its time setting each time it is switched off or unplugged.
Supply voltage and pins
The module accepts a 5V or 3.3V supply on VCC, with GND for ground. CLK, DAT and RST are the serial control lines used to read and set the time from a microcontroller.
Size and temperature range
At 26 x 16mm and about 3 grams, the board suits compact enclosures. The stated operating range of 0 to 80 degrees Celsius covers typical indoor and sheltered installations.
Compatibility and Requirements
The module needs a microcontroller with three free GPIO lines for CLK, DAT and RST, plus a 5V or 3.3V supply and ground. A CR1220 battery is required for backup operation. Wiring follows the labelled pins: VCC to supply, GND to ground, CLK, DAT and RST to your chosen GPIO pins.
Typical Uses
- Attendance and access logging systems
- Digital camera and interval timer projects
- Automated sprinkler and irrigation scheduling
- Time and calendar displays
- Data loggers that need timestamped readings
What's in the Box
One DS1302 Real Time Clock Module with a battery fitted.
Quick specs
- Item Type
- RTC Module
- Model No. / Name
- DS1302
- IC Chip
- DS1302
- Batteries Required
- CR1220
- Output Frequency
- 32.768KHz
- Operating Temperature (°C)
- 0 to 80

















