Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 24 x 24 mm power breakout that accepts 5V mini USB or 5-12V DC input and delivers regulated 5V and 3.3V outputs. It gives breadboard projects a quick, tidy power rail without building a regulator circuit.

Key Highlights

  • Dual input: mini USB 5V or 5.5 x 2.1 mm DC jack at 5-12V
  • Regulated 5V and 3.3V outputs on standard header pins
  • AMS1117 regulator for stable low-voltage supply
  • Compact 24 x 24 mm board weighing about 2 g
  • Header set included for soldering to the module
  • Suits breadboard prototypes, sensors and small logic circuits

Ideal For

  • Makers building breadboard prototypes
  • Students learning microcontroller electronics
  • Technicians testing low-power circuits
  • Hobbyists powering 3.3V sensors
  • Anyone needing a compact bench power breakout

Buying Tip

Check that your DC adapter has a 5.5 x 2.1 mm plug and stays within the 5-12V input range before connecting it.

Elecvora expert review

Our verdict

A neat, low-cost way to add regulated 5V and 3.3V rails to a small project. It is simple and compact, though it is a bare board that expects you to solder and supply your own power source.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two input options in one small board
  • Both 5V and 3.3V outputs available
  • Compact 24 x 24 mm size
  • Header set included
  • Lightweight at about 2 g

Cons

  • Headers require soldering
  • No power source or cables included
  • Limited to the stated 5-12V DC input range

Best for

Breadboard and small enclosure projects needing dual regulated rails

Not ideal for

High-current loads or projects that need a finished, enclosed supply

Specifications

Model No. / NameModule
Input Interface5V (mini USB)
USB5V and 3.3V mini Usb output
Length (mm)24
Width (mm)24
Weight (g)2
Shipping Weight0.005 kg
Shipping Dimensions7 × 4 × 2 cm

What's in the box

  • 1 x CJMCU-MINI USB 5V Socket USB DC Power Socket Module
  • 1 x Header set

Frequently Asked Questions

What input voltages does the module accept?
It accepts 5V through the mini USB port and 5-12V through the 5.5 x 2.1 mm DC jack.
What outputs does it provide?
The board provides regulated 5V and 3.3V outputs on its header pins.
Do I need to solder anything?
Yes, the included header set must be soldered to the board before you can connect outputs.
Is a power adapter included?
No. The package contains the module and a header set only; you supply the USB or DC power source.
What regulator is used on the board?
The module uses an AMS1117 regulator for its voltage conversion.
How big is the board?
It measures 24 x 24 mm and weighs approximately 2 g.

Overview

The CJMCU-MINI USB 5V/3.3V Socket Module is a small power breakout board designed to sit beside a breadboard or inside a compact enclosure. It gives you two ways to feed power in and two regulated rails to feed out, removing the need to build a regulator stage from scratch for every prototype.

On the input side, a mini USB socket accepts 5V, while a 5.5 x 2.1 mm DC barrel jack accepts 5-12V. The onboard AMS1117 regulator converts the incoming supply into stable 5V and 3.3V outputs brought out to header pins. The board measures 24 x 24 mm and weighs approximately 2 g.

Key Features

  • Mini USB input rated for 5V DC
  • 5.5 x 2.1 mm DC input rated for 5-12V DC
  • Regulated 5V and 3.3V outputs on breakout headers
  • AMS1117 regulator circuit onboard
  • Compact 24 x 24 mm footprint, about 2 g
  • Header set included for soldering

Specifications Explained

Inputs

The mini USB port is intended for a 5V supply, such as a USB adapter or a USB power lead. The barrel jack accepts a wider 5-12V range, which is useful when your only available source is a higher-voltage DC adapter. Do not exceed the stated input ranges.

Outputs

Both a 5V and a 3.3V rail are provided, so a single module can power mixed-logic projects. The 3.3V output is handy for sensors and logic devices that expect a lower supply, while the 5V rail can feed parts that need the higher level.

Size and Weight

At 24 x 24 mm and about 2 g, the board takes very little room on a bench or in an enclosure. Its shipping weight is listed as 0.005 kg, and the packed dimensions are 7 x 4 x 2 cm.

Compatibility and Requirements

The module works with a 5V mini USB source or a 5-12V DC supply fitted with a 5.5 x 2.1 mm plug. Output connections are made through the supplied header pins, which must be soldered to the board. Only the inputs and outputs stated above are supported; no other voltage ranges or connector types are specified.

Typical Uses

  • Powering breadboard prototypes that need 5V and 3.3V
  • Feeding small sensor and logic circuits from a DC adapter
  • Adding a regulated rail to a compact project enclosure
  • Bench testing low-power electronics
  • Student and hobby electronics coursework

What's in the Box

One CJMCU-MINI USB 5V Socket USB DC Power Socket Module and one header set.

Quick specs

Model No. / Name
Module
Input Interface
5V (mini USB)
USB
5V and 3.3V mini Usb output
Length (mm)
24
Width (mm)
24
Weight (g)
2
See all specifications