
1 / 4 · Click to enlarge
AI Summary
A compact buck converter that turns a 12V DC input into fixed 3.3V, 5V and 12V outputs simultaneously, each regulated rail delivering up to 800mA. The two-row pin header, on/off switch and power LED make it quick to wire into DIY electronics and prototyping setups.
Key Highlights
- 12V DC input via standard 5.5mm power jack
- Three outputs: 3.3V, 5.0V and 12V pass-through
- 3.3V and 5V rails each rated to 800mA maximum
- Two-row multiple pin outputs for simple wiring
- On/off switch with red LED input indicator
- Small dual-sided board for tight enclosures
Ideal For
- DIY hobbyists building mixed-voltage breadboard circuits
- Students learning about step-down converters and power rails
- Makers designing small enclosures with multiple voltage needs
- Electronics technicians needing a quick bench supply module
- Equipment designers adding fixed 3.3V and 5V rails from 12V
Buying Tip
Check that your 12V adapter uses a 5.5mm plug and that your combined load on the 3.3V and 5V rails stays within 800mA each before ordering.
Elecvora expert review
Our verdict
A neat, low-cost way to get 3.3V and 5V alongside a 12V pass-through from one input, with simple header wiring and a clear power indicator. It suits bench work and small designs where current demands stay modest.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Three outputs from a single 12V input
- Simple 5.5mm jack input and two-row pin outputs
- On/off switch with red LED indicator
- Compact dual-sided board
Cons
- 3.3V and 5V rails limited to 800mA each
- 12V output is unregulated pass-through, not a separate regulated rail
- No enclosure or cables included
Best for
Bench prototyping and small multi-voltage builds
Not ideal for
High-current or precision-regulated multi-rail systems
Specifications
| Input Voltage (V) | 12 |
|---|---|
| Connector Type | 5.5mm Power Jack |
| Output Voltage | 3.3V and 5V |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 30 × 4 × 2 cm |
What's in the box
- 1 x DC-DC 12V to 3.3V 5V 12V Power Module
Frequently Asked Questions
What input voltage does this module need?
How much current can each output supply?
Is the 12V output regulated?
How do I connect devices to the outputs?
How do I know the module is powered?
What is included with the module?
Overview
This DC-DC 12V to 3.3V 5V 12V power module is a step-down converter that lets you run several common voltages from one 12V DC supply. Feed it through the 5.5mm power jack and the board provides three fixed outputs at the same time: 3.3V, 5.0V and a 12V output that is directly connected to the input. It is a handy building block for breadboard projects, small enclosures and equipment designs that need more than one rail without adding separate supplies.
Key Features
- Single 12V DC input through a 5.5mm power jack
- Three simultaneous outputs: 3.3V, 5.0V and 12V pass-through
- 3.3V and 5.0V rails each supply up to 800mA maximum
- Two-row multiple pin outputs for fast, tidy connections
- On/off switch plus red LED that lights when input power is applied and output is on
- Compact dual-sided board design
Specifications Explained
Input voltage: the module is designed around a 12V DC input. The 12V output is not regulated separately; it is wired straight to the input, so it mirrors whatever DC voltage you supply. With a 12V input it delivers 12V, and with a 9V input it delivers 9V on that rail.
Outputs: the 3.3V and 5.0V rails are fixed and each is rated to a maximum of 800mA. Plan your load so neither rail is asked to exceed that figure.
Connector: the 5.5mm power jack is a common DC barrel size, making it easy to pair with standard 12V adapters and leads.
Indication and control: the red LED shows that DC input is present and the output switch is turned on, which helps you confirm power at a glance during testing.
Compatibility and Requirements
You need a 12V DC source terminated in a 5.5mm power jack to feed the module. Loads must stay within the 800mA maximum on the 3.3V and 5V outputs. The 12V output simply passes the input voltage through, so any device connected there receives the same voltage as your supply. Wiring to the output pins is done through the two-row header.
Typical Uses
Use it on the workbench to power mixed-voltage breadboard circuits, to feed sensors and logic that need 3.3V or 5V alongside a 12V device, or as a fixed multi-output supply inside small electronic equipment designs. It also suits students and makers who want one tidy board instead of several separate regulators.
What's in the Box
1 x DC-DC 12V to 3.3V 5V 12V Power Module.
Quick specs
- Input Voltage (V)
- 12
- Connector Type
- 5.5mm Power Jack
- Output Voltage
- 3.3V and 5V
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 30 × 4 × 2 cm














