Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This shield for arduino is a good fit for 3D printing users. Main specs: model no. / name Expansion Shield; width (mm) 52; weight (g) 30.

Key Highlights

  • Model No. / Name: Expansion Shield
  • Width (mm): 52
  • Weight (g): 30

Ideal For

  • Upgrading or repairing a 3D printer
  • Spare parts for long prints
  • Testing new materials

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameExpansion Shield
Width (mm)52
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions8 × 7 × 3 cm

Overview

The CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board is listed in our shield for arduino range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Expansion Shield
  • Width (mm): 52 (measure your mounting space before ordering)
  • Weight (g): 30 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.033 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 8 × 7 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board. This expansion board as a driver expansion board, can be used for engraving machines, 3D printers, CNC. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. The CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board is very convenient to use. After insert Arduino CNC Shield V3.0 into Arduino UNO, and installed GRBL firmware then you can quickly DIY a CNC engraving machine.
We are selling the range of 3D printer accessories with which you can build a 3D Printer of your own and also we are selling fully assembled 3D printers too, cool!!! so do not forget to check our 3D Printers category(click on the name below)
3D Printers and Accessories
To buy A4988 and DRV8825 Stepper Motor Drivers click on the respective name below,
A4988 DRV8825

Features :

  1. Coolant enable
  2. Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
  3. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  4. Compact design.
  5. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
  6. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  7. Please note that this is an unassembled kit and needs soldering.
  8. Latest Arduino CNC Shield Version 3.10
  9. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  10. PWM Spindle and direction pins
  11. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  12. 2 x End stops for each axis (6 in total)

Package Includes :

1 x CNC shield V3 engraving

Quick specs

Model No. / Name
Expansion Shield
Width (mm)
52
Weight (g)
30
Shipping Weight
0.033 kg
Shipping Dimensions
8 × 7 × 3 cm
See all specifications