
1 / 4 · Click to enlarge
AI Summary
A compact A4988 microstepping driver module that runs motors from 8 to 35 VDC and handles about 1 A per phase, or 2 A with the included heatsink. It offers full, 1/2, 1/4, 1/8 and 1/16 step modes with gold-plated pins.
Key Highlights
- Motor supply range of 8 to 35 VDC with 3 to 5.5 V logic
- Approximately 1 A per phase bare, 2 A with heatsink cooling
- Selectable full, 1/2, 1/4, 1/8 and 1/16 microstepping modes
- Good Quality build with multilayer PCB and gold-plated pins
- Automatic slow or mixed current decay selection
- Thermal shutdown, UVLO and crossover current protection
Ideal For
- 3D printer builders replacing or adding an axis driver
- CNC and router hobbyists driving small bipolar steppers
- Robotics teams needing compact step and direction control
- Makers building camera sliders or lab automation rigs
- Electronics students learning microstepping and current limits
Buying Tip
Check your motor's rated current and set the driver's current limit before connecting the motor, and fit the heatsink if you plan to run near 2 A.
Elecvora expert review
Our verdict
A dependable, well-protected microstepping driver for small bipolar steppers, and the gold-plated pins and multilayer PCB of this Good Quality version make it easier to solder and swap. It is a sensible choice when you need simple step and direction control with selectable resolution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 8 to 35 VDC motor supply range
- Selectable full to 1/16 microstepping
- Built-in thermal, UVLO and crossover protection
- Gold-plated pins and multilayer PCB
- Heatsink included for higher-current use
Cons
- Current capacity drops to about 1 A without cooling
- Requires a separate logic supply of 3 to 5.5 V
- Current limit must be set manually for each motor
Best for
Makers and small-machine builders driving bipolar steppers from a microcontroller
Not ideal for
High-current industrial motors well above 2 A per coil
Specifications
| Model Series | A4988 Series |
|---|---|
| Voltage Rating (V) | 8 to 35VDC |
| Current Rating (A) | 1 to 2 |
| Input Voltage (VDC) | 8 ~ 35 |
| Logic Voltage (V) | 3 ~ 5.5 |
| Operating Current (A) | 1.0A(No Heatsink ), 2.0A (with Heat-Sinking) |
| Modes | full, 1/2, 1/4, 1/8, 1/16. |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 5 × 5 × 4 cm |
What's in the box
- 1 x A4988 stepper motor driver module (Good Quality)
- 1 x heatsink
Frequently Asked Questions
What voltage does the A4988 module need?
How much current can it deliver?
What microstep modes are available?
What is included with the module?
What is different about the Good Quality version?
Does it need a special power-up sequence?
Overview
The A4988 is a complete microstepping driver board for bipolar stepper motors, combining the driver IC, control interface and current regulation on one small module. It takes step and direction signals from a microcontroller or controller board, so you do not need to program phase sequence tables or manage high-frequency motor control in your main firmware. This is the Good Quality version, which uses a multilayer PCB and gold-plated connection pins, a useful upgrade for builds that involve repeated soldering or frequent module swaps.
Key Features
- Wide 8 to 35 VDC motor supply with separate 3 to 5.5 V logic supply
- Five step resolutions: full, 1/2, 1/4, 1/8 and 1/16
- Automatic selection between slow and mixed current decay modes
- Internal synchronous rectification to reduce power dissipation
- Protection including undervoltage lockout, crossover current protection, thermal shutdown and short-circuit protection
- Gold-plated pins and a multilayer PCB on this Good Quality variant
Specifications Explained
Voltage
The motor supply can range from 8 to 35 VDC, while the logic side needs 3 to 5.5 V. Keeping the two supplies within these windows is essential for reliable stepping and protects the driver IC.
Current
The module is rated at about 1 A per phase without a heatsink or forced airflow, and up to 2 A per coil when the included heatsink is fitted and airflow is adequate. Set the current limit for your motor before running it continuously.
Microstepping
Full, 1/2, 1/4, 1/8 and 1/16 modes let you choose between higher torque at full step and smoother, quieter motion with finer resolution at higher microstep settings.
Compatibility and Requirements
The board needs a motor supply of 8 to 35 VDC and a logic supply of 3 to 5.5 V, plus step and direction signals from a suitable controller. It is designed for bipolar stepper motors within the stated current rating. No special power-up sequence is required.
Typical Uses
Common applications include CNC routers, 3D printer axes, small robotics, camera sliders, lab automation and other projects where a microcontroller drives a stepper motor through a compact driver stage.
What's in the Box
- 1 x A4988 stepper motor driver module (Good Quality)
- 1 x heatsink
Quick specs
- Model Series
- A4988 Series
- Voltage Rating (V)
- 8 to 35VDC
- Current Rating (A)
- 1 to 2
- Input Voltage (VDC)
- 8 ~ 35
- Logic Voltage (V)
- 3 ~ 5.5
- Operating Current (A)
- 1.0A(No Heatsink ), 2.0A (with Heat-Sinking)














