Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DC-DC buck module that converts up to 40V DC input into a stable 12V output at up to 3A. Its low-ripple design and up to 95% efficiency make it a tidy power stage for embedded and DIY electronics.

Key Highlights

  • Steps input up to 40V DC down to a regulated 12V output
  • Delivers up to 3A for microcontrollers, sensors and 12V devices
  • Low ripple output supports stable operation of sensitive electronics
  • Up to 95% efficiency with 500kHz switching frequency
  • Solder plate aids heat dissipation during continuous use
  • Tiny 20 x 17mm board weighing around 3g

Ideal For

  • Makers building embedded and microcontroller projects
  • Robotics and automation hobbyists needing a 12V rail
  • IoT developers powering sensor nodes from higher DC supplies
  • DIY enthusiasts assembling custom power supplies
  • Portable electronics builders working in tight enclosures

Buying Tip

Check that your load stays under 3A at 12V and that your input source never exceeds 40V DC before wiring the module in.

Elecvora expert review

Our verdict

A practical, low-cost step-down board for anyone who needs a stable 12V rail from a higher DC source in a very small space. It is best treated as a component for soldered builds rather than a plug-and-play adapter.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very compact 20 x 17mm footprint
  • Up to 3A output at a fixed 12V
  • Low ripple and up to 95% efficiency
  • Solder plate supports thermal management

Cons

  • Fixed 12V output with no adjustment
  • Requires soldering to connect
  • No connectors or mounting hardware included

Best for

Compact embedded and DIY projects needing a 12V rail from a higher DC supply

Not ideal for

Users wanting a plug-and-play adjustable bench supply

Specifications

Module TypeDC-DC Buck Converter
Input VoltageUp to 40V DC
Output Voltage12 V
Maximum Output Current (A)3A
Switching frequency500KHz
RippleLow Ripple Output
EfficiencyUp to 95%
Length (mm)20
Width (mm)17
Weight (g)03
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.005 kg
Shipping Dimensions10 × 8 × 2 cm

What's in the box

  • 1 x DC 40V to 12V 3A High Power Low Ripple Buck Module

Frequently Asked Questions

What input voltage does this module accept?
It accepts DC input up to 40V. Keep your source within that limit to avoid damaging the board.
What is the output voltage and current?
The output is fixed at 12V with a maximum current of 3A. Loads should stay below that current limit.
Is the output adjustable?
No. The module is specified as a fixed 12V output, so there is no adjustment for other voltages.
How do I connect it to my circuit?
Connections are soldered to the board's input and output pads. No connectors or cables are included.
What comes in the package?
The package contains one DC 40V to 12V 3A High Power Low Ripple Buck Module.
How should I handle heat during long use?
The board includes a solder plate for heat dissipation. For continuous operation, avoid tight enclosures and keep airflow around the module.

Overview

This DC-DC buck converter is a small step-down module that accepts a DC input of up to 40V and produces a fixed 12V output at up to 3A. It is built for projects where a higher battery or supply rail needs to feed 12V electronics without adding a bulky regulator stage. The board uses a 500kHz switching frequency and reaches up to 95% efficiency, which helps limit wasted power as heat.

Measuring approximately 20mm by 17mm and weighing about 3g, the module is easy to tuck into compact enclosures, handheld builds and embedded layouts. A dedicated solder plate is included to improve heat dissipation when the module runs continuously.

Key Features

  • Wide input range: accepts DC input up to 40V
  • Fixed 12V output with a maximum current of 3A
  • Low ripple output for cleaner power to sensitive circuits
  • 500kHz switching frequency and up to 95% efficiency
  • Solder plate for enhanced thermal performance
  • Compact, lightweight PCB design

Specifications Explained

Input and output

The input accepts up to 40V DC, so the module can sit between a higher-voltage supply and a 12V load. Output is fixed at 12V, which keeps wiring simple for devices designed around that rail. The 3A maximum output current sets the practical ceiling for connected loads.

Ripple, frequency and efficiency

A low-ripple output means the 12V rail stays steadier, which matters for analogue sensing and microcontroller work. The 500kHz switching frequency allows a compact board, and efficiency of up to 95% means less energy is lost during conversion.

Size and thermal handling

At roughly 20 x 17mm and about 3g, the module adds very little bulk. The solder plate helps spread heat away from the switching components during longer runs.

Compatibility and Requirements

The module is intended for DC input only, up to 40V, and provides a fixed 12V output. It requires a DC source within that input range and a load that draws no more than 3A at 12V. Connections are made by soldering to the board. No connectors, cables or mounting hardware are supplied with the module.

Typical Uses

  • Embedded electronics and development board power
  • DIY power supplies and voltage regulation tasks
  • Battery-powered systems and portable devices
  • Robotics and automation projects
  • IoT nodes and sensor circuits needing a 12V rail

What's in the Box

1 x DC 40V to 12V 3A High Power Low Ripple Buck Module

Quick specs

Module Type
DC-DC Buck Converter
Input Voltage
Up to 40V DC
Output Voltage
12 V
Maximum Output Current (A)
3A
Switching frequency
500KHz
Ripple
Low Ripple Output
See all specifications