
1 / 7 · Click to enlarge
AI Summary
A compact DC-DC step-down buck converter that turns 24V, 12V or 9V input into a fixed 5V 5A output at up to 25W. It works as a simple LM2596S replacement with minimal external components.
Key Highlights
- Fixed 5V output rated up to 5A and 25W
- Accepts 24V, 12V or 9V DC input
- Drop-in style replacement for LM2596S designs
- Internal frequency compensation and fixed oscillator
- Compact 45 x 31 x 16 mm board weighing 12 g
- Three-pin layout: In+, Out+ and GND
Ideal For
- Makers building small 5V power rails
- Electronics hobbyists replacing an LM2596S stage
- Repairers servicing on-card switching regulators
- DIY projects needing a compact step-down module
Buying Tip
Check that your load stays within 5A and 25W, and keep the input safely below the 35V maximum before connecting the module.
Elecvora expert review
Our verdict
A tidy little fixed-output module that simplifies bringing a higher DC voltage down to 5V for small projects. It is a sensible, low-fuss replacement for an LM2596S stage when your needs match its 5A and 25W envelope.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fixed 5V output up to 5A and 25W
- Accepts 24V, 12V or 9V input
- Few external components needed
- Compact 45 x 31 x 16 mm board
Cons
- Output is fixed at 5V, not adjustable
- Input must stay below the 35V maximum
- No enclosure or connectors included
Best for
Compact 5V power rails in DIY and on-card regulator projects
Not ideal for
Builds needing an adjustable output voltage
Specifications
| Model No. / Name | Buck Converter Module |
|---|---|
| Dimensions (L x W x H) mm | 45 x 31 x 16 |
| Weight (g) | 12g |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
What's in the box
- 1 x DC-DC Step-Down Buck Converter Power Supply Module 24V 12V 9V to 5V 5A 25W
Frequently Asked Questions
What input voltages does this module accept?
How much current can it supply?
Can it replace an LM2596S?
What is the maximum input voltage?
How do I connect the pins?
What is included in the package?
Overview
This DC-DC step-down buck converter module is a small switching regulator board that reduces a higher DC input to a stable 5V rail. It accepts 24V, 12V or 9V input and provides a fixed 5V output rated at up to 5A, for roughly 25W of delivered power. The design uses a fixed-frequency oscillator with internal frequency compensation, so it requires only a minimal number of external components to operate. That makes it a straightforward substitute for the LM2596S in step-down regulator circuits.
Key Features
- Fixed 5V output: rated up to 5A and 25W for small power rails.
- Flexible input: works from 24V, 12V or 9V DC supplies.
- Simple integration: internal frequency compensation reduces the parts count.
- Compact footprint: 45 x 31 x 16 mm and about 12 g.
- Clear pinout: In+, Out+ and GND markings for quick wiring.
Specifications Explained
The 5A current rating and 25W power figure describe the load the module is built to drive, so keep your project's current draw within that range. The 5V output is fixed, which suits circuits that expect a steady logic or peripheral supply. The three pins are labelled In+ for input positive, Out+ for output positive and GND, which serves as both input and output negative. The board measures 45 x 31 x 16 mm and weighs 12 g, so it fits into tight builds and on-card regulator positions. The maximum input limit is 35V; stay within a safe input range to avoid damage.
Compatibility and Requirements
The module is intended as a replacement for the LM2596S in step-down applications. It needs a DC input of 24V, 12V or 9V and delivers a fixed 5V output. Wiring requires connection to In+, Out+ and GND. Because the input limit is 35V, confirm your supply stays inside a safe range before powering the board.
Typical Uses
- Simple high-efficiency step-down regulator stages
- On-card switching regulators inside enclosures
- Positive-to-negative converter arrangements
- DIY power supplies and electronics projects needing a 5V rail
What's in the Box
One DC-DC step-down buck converter power supply module, 24V/12V/9V to 5V 5A 25W.

Quick specs
- Model No. / Name
- Buck Converter Module
- Dimensions (L x W x H) mm
- 45 x 31 x 16
- Weight (g)
- 12g
- Shipping Weight
- 0.05 kg
- Shipping Dimensions
- 5 × 4 × 2 cm














