Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An XL4015 step-down module that turns 5-38V DC input into an adjustable 1.25-36V output at up to 5A and 75W. Its 4-digit voltmeter displays and calibrates input or output voltage for confident bench and project work.

Key Highlights

  • Adjustable output from 1.25V to 36V DC
  • Handles up to 5A and 75W of output power
  • 4-digit voltmeter shows input or output voltage
  • High efficiency around 96 percent with low ripple
  • Short-circuit and over-temperature protection onboard
  • Compact board with simple IN and OUT wiring

Ideal For

  • Electronics hobbyists building custom power rails
  • Students learning DC-DC conversion principles
  • Repair technicians testing low-voltage devices
  • Makers powering LED, fan and motor projects
  • Bench users needing an adjustable display-equipped supply

Buying Tip

Confirm your input voltage stays above your target output and keep the module ventilated when running close to 5A or 75W.

Elecvora expert review

Our verdict

A practical, well-rounded buck module that pairs a useful 5A power stage with a calibratable digital display. It is a sensible choice for bench work and projects where you want to see the voltage without reaching for a meter.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable 1.25-36V output covers many low-voltage needs
  • Built-in 4-digit voltmeter with calibration
  • High efficiency and low ripple design
  • Short-circuit and over-temperature protection
  • Compact footprint for enclosures

Cons

  • No input reverse polarity protection
  • Requires soldering or careful wiring
  • Heat rises quickly near maximum current

Best for

Bench testing, DIY power rails and small device projects

Not ideal for

High-voltage mains work or reverse-polarity-prone setups without added protection

Specifications

Output Power (W)75
Input Voltage (V)5 – 38 DC
DC Output Voltage (V)1.25 ~ 36 (adjustable)
Voltmeter Error± 0.05V
Conversion efficiency0.96
Shipping Weight0.045 kg
Shipping Dimensions7 × 5 × 3 cm

What's in the box

  • 1 x DC-DC XL4015 Adjustable Step-Down Module 5A 75W with 4-Digit Digital Display Voltmeter

Frequently Asked Questions

What input voltage does this module need?
It accepts 5 to 38V DC. The input must always be higher than the output voltage you want, because it is a step-down converter.
What output voltage and current can it provide?
The output is adjustable from 1.25 to 36V DC, with up to 5A and 75W of output power.
How do I read the voltmeter?
Use the right button to switch between IN and OUT modes. The 4-digit display then shows the input or output voltage, and you can calibrate it if the reading drifts.
Does it protect against short circuits?
Yes, it has short-circuit protection with current limiting at 8A, plus over-temperature shutdown that cuts the output automatically.
Is reverse polarity protection included?
No. There is no input reverse polarity protection, so check polarity carefully or add a high-current diode in series if needed.
What is included in the package?
The package contains one XL4015 adjustable step-down module with the 4-digit digital display voltmeter.

Overview

The XL4015 Adjustable Step-Down Module is a compact DC-DC buck converter that reduces a higher input voltage to a lower, user-set output. It accepts 5 to 38V DC on the input side and delivers an adjustable 1.25 to 36V output, with a maximum output power of 75W and a load capability of 5A. The board uses a fixed-frequency PWM buck design, which helps it maintain high conversion efficiency and stable regulation as the load changes.

A 4-digit digital voltmeter is built into the module. Using the two onboard buttons you can switch the display between input and output voltage, and you can calibrate the reading so it matches a trusted reference meter. This makes the module useful both as a power supply component and as a quick voltage-checking tool on the bench.

Key Features

  • Wide input range: 5 to 38V DC input for many adapter and battery sources.
  • Adjustable output: 1.25 to 36V DC, set with the onboard adjustment.
  • Substantial power: up to 5A and 75W output.
  • Digital display: 4-digit voltmeter with IN and OUT readout modes.
  • Calibration function: fine-tune the displayed voltage for better accuracy.
  • Protection: short-circuit limiting at 8A and automatic over-temperature shutdown.
  • Power indicator: onboard LED shows the module is powered.

Specifications Explained

Input voltage (5-38V DC) defines the supply you connect to IN+ and IN-. The input must always be higher than the output you want, since this is a step-down converter. Output voltage (1.25-36V) is adjustable, giving you a broad range for low-voltage electronics and higher-voltage accessories. Output power (75W) and 5A capability mean the module can drive reasonably demanding loads, but remember that higher currents generate more heat, so keep the board ventilated. Conversion efficiency of about 96 percent means less energy is wasted as heat compared with lower-efficiency designs. The voltmeter error of plus or minus 0.05V is tight, and the calibration routine lets you correct small offsets further.

Compatibility and Requirements

The module needs a DC input within 5 to 38V and a load rated for the output voltage and current you set. Wiring is straightforward: IN+ and IN- for the input, OUT+ and OUT- for the load. There is no input reverse polarity protection, so double-check polarity before powering up, or add a high-current diode in series if reverse connection is a risk. Soldering or secure screw-terminal wiring is required depending on your setup.

Typical Uses

Use it to create a stable lower-voltage rail from a higher-voltage adapter, to power small motors, LED arrays, fans or microcontroller projects, or as an adjustable bench supply for testing. The digital display makes it convenient for quick voltage checks during assembly and troubleshooting.

What's in the Box

  • 1 x DC-DC XL4015 Adjustable Step-Down Module 5A 75W with 4-Digit Digital Display Voltmeter

Quick specs

Output Power (W)
75
Input Voltage (V)
5 – 38 DC
DC Output Voltage (V)
1.25 ~ 36 (adjustable)
Voltmeter Error
± 0.05V
Conversion efficiency
0.96
Shipping Weight
0.045 kg
See all specifications