Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 2.1 channel amplifier board built around two TPA3110D2 chips, driving left, right and subwoofer outputs from a 12-24V DC supply. Screw terminals and an onboard volume control make it simple to wire into DIY speaker projects.

Key Highlights

  • Dual TPA3110D2 chips for stereo plus subwoofer amplification
  • 2.1 channel layout with left, right and dedicated subwoofer outputs
  • Wide 12-24V DC operating voltage for flexible power setups
  • 30W subwoofer output with 4-8 ohm speaker impedance support
  • 100dB signal-to-noise ratio for clean audio reproduction
  • Compact 100 x 70 x 30 mm PCB with terminal connections

Ideal For

  • DIY audio hobbyists building compact 2.1 speaker systems
  • Makers designing custom enclosures with active amplification
  • Desktop audio tinkerers wanting a small subwoofer channel
  • Students learning about digital amplifier boards
  • Anyone upgrading passive speakers with a compact amp module

Buying Tip

Confirm your power supply sits within the 12-24V DC range and your speakers are rated 4-8 ohm before wiring the board.

Elecvora expert review

Our verdict

A tidy, affordable way to add 2.1 amplification to a small DIY audio project. The dual TPA3110D2 design and wide voltage range make it flexible, provided you supply your own power and speakers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dedicated subwoofer channel alongside stereo output
  • Wide 12-24V DC input range
  • Compact PCB with terminal connections
  • High 100dB signal-to-noise ratio

Cons

  • Power supply and speakers are not included
  • Requires wiring and basic electronics skills
  • Output power is modest for large rooms

Best for

Compact DIY 2.1 speaker and subwoofer builds

Not ideal for

Powering large passive home theatre speakers

Specifications

Output Power (W)30
Operating Voltage (VDC)12 to 24
No. of Channels3
ChipTPA3110D2
Output Impedance4-8 ohm
Audio input/output PortTerminals
Frequency (kHz)14-100KHz
Signal to noise ratio (SNR)100dB
Switching frequency1.2MHz
PCB Board Size (mm)100 x 70 x 30
Weight (g)113g
Shipping Weight0.32 kg
Shipping Dimensions14 × 10 × 3 cm

What's in the box

  • 1 x DC12-24V TPA3110D2 2.1 Channel Digital Subwoofer Power Amplifier Board

Frequently Asked Questions

What power supply does this board need?
It requires a DC supply between 12V and 24V. The power supply itself is not included, so choose one that matches your build.
Which speakers can I connect?
Speakers rated between 4 and 8 ohm are supported. Check the impedance of each driver before wiring.
How many channels does it have?
The board provides three channels: left, right and a dedicated subwoofer channel.
How do I connect audio and speakers?
Both audio input and speaker output use screw terminals on the board. Strip and secure your cables in the matching terminals.
Is a volume control included?
Yes, the board has an onboard volume control so you can adjust listening level directly.
What is included in the package?
The package contains one amplifier board only. Power supply, speakers and cables are not included.

Overview

This amplifier board brings 2.1 channel audio to compact DIY builds. Two TPA3110D2 digital amplifier chips handle the left and right channels together with a dedicated subwoofer channel, so a single board can drive a small satellite-plus-subwoofer setup. Power comes from a DC supply between 12V and 24V, and all connections are made through screw terminals for straightforward wiring.

The PCB measures 100 x 70 x 30 mm and weighs 113 g, making it easy to mount inside a speaker cabinet, project box or desktop enclosure. An onboard volume control lets you adjust listening level without adding a separate preamp.

Key Features

  • Two TPA3110D2 digital amplifier chips
  • 2.1 channel output: left, right and subwoofer
  • 30W subwoofer output power
  • 12-24V DC wide input voltage
  • 4-8 ohm speaker impedance support
  • 100dB signal-to-noise ratio
  • 1.2MHz switching frequency
  • Terminal-based audio input and output connections
  • Onboard volume adjustment

Specifications Explained

Power and channels

The board is rated for a 30W output on the subwoofer channel, with stereo channels for left and right. Three channels in total mean you can build a 2.1 system from one compact module rather than combining separate amplifiers.

Voltage range

A 12-24V DC input range gives you room to match the board to the supply you already have. Higher voltage within that range typically supports stronger output, while 12V suits smaller setups.

Speaker impedance

Speakers between 4 and 8 ohms are supported. Check your drivers before wiring to keep the load within this range.

Audio quality figures

A 100dB signal-to-noise ratio indicates low background noise, and the 1.2MHz switching frequency reflects the digital amplifier design. The stated frequency range is 14-100KHz.

Compatibility and Requirements

You will need a DC power supply within the 12-24V range and speakers rated at 4-8 ohm. Audio sources connect through the input terminals, and speakers connect through the output terminals. The board does not include a power supply or speakers, so plan those parts into your build.

Typical Uses

  • DIY desktop 2.1 speaker systems
  • Small subwoofer and satellite builds
  • Project boxes and custom audio enclosures
  • Hobby and maker audio prototypes
  • Upgrading passive speaker setups with active amplification

What's in the Box

One DC12-24V TPA3110D2 2.1 Channel Digital Subwoofer Power Amplifier Board.

Quick specs

Output Power (W)
30
Operating Voltage (VDC)
12 to 24
No. of Channels
3
Chip
TPA3110D2
Output Impedance
4-8 ohm
Audio input/output Port
Terminals
See all specifications