
1 / 3 · Click to enlarge
At a glance
Made by DFRobot, this bluetooth and nrf modules is a good fit for makers, students and electronics hobbyists. Main specs: item type DFRobot Module; bluetooth version 4; voltage rating 8. Check that your power source supplies 8 before connecting it.
Key Highlights
- Wireless connection
- Item Type: DFRobot Module
- Bluetooth Version: 4
- Voltage Rating: 8
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | DFRobot Module |
|---|---|
| Bluetooth Version | 4 |
| Voltage Rating | 8 |
| Input Voltage (V) | <8 |
| Interface Type | I2C |
| Sensitivity (dBm) | -93 |
| Max. Clock Frequency (MHz) | 16 |
| Operating Temperature (°C) | -10 to 85 |
| Length (mm) | 33.1 |
| Width (mm) | 28.8 |
| Weight (g) | 10.4 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
Overview
The DFRobot Beetle BLE - The Smallest Board Based on Arduino Uno with Bluetooth 4.0, made by DFRobot, is listed in our bluetooth and nrf modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: DFRobot Module
- Bluetooth Version: 4 (check your phone or controller supports the same Bluetooth version for full range)
- Voltage Rating: 8 (match this to your power supply; too high a voltage can damage the part)
- Input Voltage (V): <8 (match this to your power supply; too high a voltage can damage the part)
- Interface Type: I2C (confirm your cable or board uses the same connector)
- Sensitivity (dBm): -93
- Max. Clock Frequency (MHz): 16 (make sure the rest of your system works at this frequency)
- Operating Temperature (°C): -10 to 85
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Beetle Ble (Former name as Bluno Beetle) is a board based on Arduino Uno with Bluetooth 4.0 (BLE). It is probably the smallest BLE board in the market. DFRobot Beetle BLE - The Smallest Board Based on Arduino Uno with Bluetooth 4.0 uses standard Arduino IDE to upload codes via without any extra library and drivers. This Beetle BLE is another milestone in the Beetle line, which makes DIY users have more options in the project design. It is fully compatible with Bluno in instructions and procedures. Support Bluetooth HID and ibeacon modes. You may also check the Bluetooth microcontroller selection guide to get more information.
The DFRobot Beetle BLE - The Smallest Board Based on Arduino Uno with Bluetooth 4.0 is a super tiny and low-cost Arduino-compatible board. The Beetle BLE can be used for disposable projects, such as DIY projects, workshops, gift projects, E-Textiles wearable, and educational. For students and makers who can not afford too much on hardware purchasing, Beetle can be a great solution.
Just like a native Arduino board, but with Bluetooth 4.0. An APP called Play Bluno is available on IOS and Android which gives quick access to this little tiny board. It not only supports USB programming but also wireless uploading method. With the V-shaped gilded I/O interface, it is convenient to screw conductor wire on it, which could a good choice in the wearable market.
Features:
- ATmega328@16MHz
- Bluetooth Low Energy (BT 4.0)
- Micro USB port
- Super Compact Size
- Support Bluetooth HID and ibeacon
- Compatible with all DFRobot Bluno Series
- Support Wireless Programming
Useful Links:
Package Includes:
1 x DFRobot Beetle BLE - The Smallest Board Based on Arduino Uno with Bluetooth 4.0Quick specs
- Item Type
- DFRobot Module
- Bluetooth Version
- 4
- Voltage Rating
- 8
- Input Voltage (V)
- <8
- Interface Type
- I2C
- Sensitivity (dBm)
- -93



















