Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP32 Based; flash memory 32Mbit; processor type Tensilica LX6 dual-core processor. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: ESP32 Based
  • Flash Memory: 32Mbit
  • Processor Type: Tensilica LX6 dual-core processor

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeESP32 Based
Flash Memory32Mbit
Processor TypeTensilica LX6 dual-core processor
Clock Frequency40
Operating Voltage (VDC)3.3
Input Voltage (V)3.3V~5.5V.
Support Low-Power10uA
Max. Discharge Current (A)[email protected] LDO
Max Current Continuous (A)500mA
Main Frequency240MHz
SRAM520kB
WiFi StandardFCC/CE/TELEC/KCC
WiFi Protocol802.11 b/g/n/d/e/i/k/r (802.11n,speed up to 150 Mbps), A-MPDU and A-MSDU Aggregation, support 0.4us guard interval).
Frequency2.4~2.5 GHz
Bluetooth VersionBluetooth v4.2 BR/EDR and BLE standard compliant, CVSD and SBC Bluetooth audio
Operating Current (A)80mA(Average)
On-chip Clock40MHz crystal, 32.768KHz crystal
RGB LED5/D8
Connector TypeFireBeetle V2 series compatible
Operating Temperature (°C)-40℃~+85℃
Module Size (LxWxH) mm25.4×60mm/1×2.36”
Mounting Hole Diameter (mm)inner diameter of 2.0mm
Shipping Weight0.02 kg
Shipping Dimensions5 × 3 × 1 cm

Overview

The DFRobot DFR0654 FireBeetle 2 ESP32-E IoT Development Board supports Wi-Fi and Bluetooth, made by DFRobot, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: ESP32 Based
  • Flash Memory: 32Mbit (more memory leaves room for larger programs and buffers)
  • Processor Type: Tensilica LX6 dual-core processor (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Clock Frequency: 40 (make sure the rest of your system works at this frequency)
  • Operating Voltage (VDC): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Input Voltage (V): 3.3V~5.5V. (match this to your power supply; too high a voltage can damage the part)
  • Support Low-Power: 10uA (confirm your cable or board uses the same connector)
  • Max. Discharge Current (A): [email protected] LDO (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a DFRobot DFR0654 FireBeetle 2 ESP32-E IoT Development Board supports Wi-Fi and Bluetooth.

FireBeetle ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips.

It supports WiFi and Bluetooth dual-mode communication and features a small size, ultra-low power consumption, onboard charging circuit, and easy-to-use interface, which can be conveniently used for smart home IoT, industrial IoT applications, wearable devices, and so on. You can easily create your own IoT smart home system when connecting it with an IoT platform like IFTTT.DFRobot FireBeetle 2 ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)

FireBeetle ESP32-E supports Arduino programming and will support Scratch graphical programming and MicroPython programming very soon. We provide you with detailed online tutorials and application cases, and there are thousands of sensors with welding-free Gravity interfaces and actuators to help you get started easily. Besides, the stamp hole design makes it able to be easily embedded in your PCB, greatly saving your costs and time to build and test a prototype.


Features:

  1. ESP32 Dual-core low power main controller, 10uA power consumption
  2. WiFi+Bluetooth 4.0 Dual-mode Module
  3. GDI Display Port, easy to connect
  4. Onboard Charging Circuit and PH2.0 lithium Battery Interface
  5. Support USB Charging
  6. Digital I/O x10(Arduino default)
  7. Analog Input x5(Arduino default)
  8. SPI x1(Arduino Default)
  9. IIC x1(Arduino Default)
  10. I2S x1(Arduino Default)
 

Useful Links:


Package Includes:

1 x DFRobot DFR0654 FireBeetle 2 ESP32-E IoT Development Board supports Wi-Fi and Bluetooth

Quick specs

Item Type
ESP32 Based
Flash Memory
32Mbit
Processor Type
Tensilica LX6 dual-core processor
Clock Frequency
40
Operating Voltage (VDC)
3.3
Input Voltage (V)
3.3V~5.5V.
See all specifications