Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This dual-channel RS485 HAT adds two isolated, protected serial ports to your Raspberry Pi 4B or 3B+. It includes 120Ω terminal resistors and pluggable terminal blocks for reliable long-distance communication.

Key Highlights

  • Dual isolated RS485 channels for Raspberry Pi 4B and 3B+
  • TP75176E transceivers with CH432T serial chip
  • Built-in lightning, surge, and TVS protection
  • 120Ω terminal resistors on each channel
  • Pluggable terminal blocks for secure wiring
  • Power and RX indicators for easy monitoring

Ideal For

  • Industrial automation engineers
  • Agricultural IoT developers
  • Warehouse monitoring system integrators
  • Environmental sensor network builders
  • Access control and security installers

Buying Tip

Confirm that your Raspberry Pi model is 4B or 3B+ and that you have a 3.3V-compatible RS485 bus before purchasing; this HAT does not include a power supply.

Elecvora expert review

Our verdict

A solid, well-protected dual-channel RS485 HAT that brings industrial-grade isolation and surge protection to the Raspberry Pi. It is an excellent choice for reliable serial communication in electrically noisy environments.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual isolated channels for safe, interference-free communication
  • Integrated lightning and surge protection
  • Pluggable terminal blocks simplify wiring
  • Onboard termination resistors
  • Clear power and RX indicators

Cons

  • Requires a Raspberry Pi, which is not included
  • No software libraries provided; users must configure serial ports manually
  • Limited to Raspberry Pi 4B and 3B+ models

Best for

Engineers and makers needing robust dual RS485 connectivity for industrial or outdoor IoT projects.

Not ideal for

Users looking for a plug-and-play USB-to-RS485 adapter or those with Raspberry Pi 5 or older models.

Specifications

Item TypeHAT
CompatibilityPi 4B
HAT TypeExpansion HAT
Operating Voltage (VDC)3.3V
RS485 transceiverTP75176E
Serial ChipCH432T
Interface2, RS485 Interface
power indicatorred
Indicatorgreen, RX Communication Indicator
Resistance (Ohm)2, 120Ω Terminal Resistance
Wiring method5.08-3P pluggable terminal block
Supported deviceRaspberry Pi 3B+/4B
Mounting Hole Diameter (mm)diameter 2.5mm
Dimensions (L x W x H) mm56×65mm/2.20×2.56”, (Package Not Included)
Shipping Weight0.052 kg
Shipping Dimensions11 × 9 × 3 cm

What's in the box

  • 1 x RS485 Expansion HAT for Raspberry Pi
  • 4 x Copper Column & Screw

Frequently Asked Questions

Is this HAT compatible with Raspberry Pi 5?
No, this HAT is designed for Raspberry Pi 4B and is also compatible with Raspberry Pi 3B+. It is not listed as compatible with Raspberry Pi 5.
Does the HAT provide isolation between the two RS485 channels?
Yes, each channel uses an isolated transceiver, providing electrical and signal isolation between channels and from the Raspberry Pi.
What is the purpose of the 120Ω resistors?
The onboard 120Ω terminal resistors can be enabled to terminate the RS485 bus, reducing signal reflections in long-distance communication.
What power supply does the HAT require?
The HAT operates at 3.3V, which is supplied directly from the Raspberry Pi's GPIO header. No external power supply is needed.
Are cables included for connecting to RS485 devices?
No, cables are not included. You will need to provide your own twisted-pair cable and strip the wires to insert into the pluggable terminal blocks.
What is included in the package?
The package includes the RS485 Expansion HAT and a screw accessory kit with four copper columns and screws for mounting.

Overview

The DFRobot Dual-Channel RS485 Expansion HAT is a compact add-on board that provides your Raspberry Pi 4B or 3B+ with two independent RS485 serial interfaces. RS485 is widely used in industrial and commercial settings for its excellent noise immunity and ability to span long distances. This HAT employs isolated transceivers to keep each channel electrically separated, which improves reliability and protects your Pi from voltage spikes and ground loops. Whether you are building a sensor network, controlling equipment, or integrating legacy serial devices, this HAT offers a robust, ready-to-use solution.

Key Features

  • Dual isolated channels: Each RS485 port is electrically and signal-isolated, preventing interference and protecting your Raspberry Pi.
  • Integrated protection: Lightning and surge protection, along with a TVS diode, help safeguard against transient voltages.
  • Terminal resistors: Onboard 120Ω resistors can be enabled to reduce signal reflections in long cable runs.
  • Clear indicators: A red power LED and green RX communication LEDs per channel simplify status checks.
  • Pluggable terminal blocks: 5.08mm 3-pin connectors allow quick, secure wiring without soldering.
  • Mounting hardware included: Copper columns and screws secure the HAT firmly to your Pi.

Specifications Explained

The HAT operates at 3.3V, matching the Raspberry Pi logic level. Each channel uses a TP75176E RS485 transceiver, a robust industry-standard part, while the CH432T serial chip handles communication between the Pi and the transceivers. The board includes two 120Ω terminal resistors—one per channel—that you can activate to terminate the bus and minimise signal reflections. The 5.08-3P pluggable terminal blocks accept stripped wires and provide a reliable connection. Measuring 56mm by 65mm, the HAT fits neatly on the Pi, and the 2.5mm mounting holes align with the standard standoff positions.

Compatibility and Requirements

This HAT is designed for the Raspberry Pi 4B and is also compatible with the Raspberry Pi 3B+. It requires a Raspberry Pi board (not included) and a 3.3V power source from the Pi itself. No additional drivers are needed beyond standard RS485 configuration in your operating system. The package includes the HAT and a screw accessory kit for mounting.

Typical Uses

Use this HAT in agricultural IoT systems to connect soil sensors and weather stations, in warehouse automation for conveyor or inventory devices, for indoor and outdoor environmental monitoring, in lighting control networks, and in security access control systems. Its isolation and protection make it suitable for electrically noisy environments.

What's in the Box

  • 1 x RS485 Expansion HAT for Raspberry Pi
  • 4 x Copper Column & Screw

Quick specs

Item Type
HAT
Compatibility
Pi 4B
HAT Type
Expansion HAT
Operating Voltage (VDC)
3.3V
RS485 transceiver
TP75176E
Serial Chip
CH432T
See all specifications