Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Other IoT Boards; operating voltage (vdc) 3.3; emersion current(ma) ≤120. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Item Type: Other IoT Boards
  • Operating Voltage (VDC): 3.3
  • Emersion Current(mA): ≤120

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOther IoT Boards
Operating Voltage (VDC)3.3
Emersion Current(mA)≤120
Current - Receiving≤15
Sleep Current (uA)≤1
Transmission ModeFIFO/ DMA
Modulation TypeLoRaTM /FSK /GFSK /OOK
Interface TypeSPI
Output Power(dBm)≤20
Operating Temperature (°C)-20 to 70°C
Length (mm)58
Width (mm)29
Shipping Weight0.02 kg
Shipping Dimensions6 × 5 × 2 cm

Overview

The DFRobot FireBeetle Covers-LoRa Radio 433MHz, made by DFRobot, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Other IoT Boards
  • Operating Voltage (VDC): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Emersion Current(mA): ≤120 (your supply must deliver at least this much current)
  • Current - Receiving: ≤15 (your supply must deliver at least this much current)
  • Sleep Current (uA): ≤1 (your supply must deliver at least this much current)
  • Transmission Mode: FIFO/ DMA
  • Modulation Type: LoRaTM /FSK /GFSK /OOK
  • Interface Type: SPI (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point of fast and convenient low-power IoT building. There are three categories of the FireBeetle series, containing Boards (main control), Covers (expansion boards), and related Accessories. FireBeetle LoRa 433MHz wireless transmission module adopts a high-performance chip SX127x LoRa 433MHz and with built-in PA (power amplifier) gain, compatible with Arduino. It supports long-range monitor, FSK modulation and the maximum transmission rate is 300K[null bps]. It also supports LoRaTM, the maximum transmission rate is 37.5Kbps. The circuit current is even lower than 0.2uA in the low power mode. It can be widely used in remote home automation detection, health monitoring, and wearable device, and so on. NOTE: All parameters related to wireless signals in the same network should maintain consistency to avoid communication problems.

 Features:

  1. High-performance chip SC127xLoRa 433MHz or 915MHz
  2. Built-in power amplifier gain
  3. Compatible with Arduino
  4. <0.2µA circuit current in low power mode

Useful Links:


Package Includes:

1 x FireBeetle Covers-LoRa Radio 433MHz

2 x 18pin-2.54mm Pin Header

2 x 18pin-2.54mm Long Pin Header

1 x 433MHz Spring Antenna – IPEX

1 x SMA-KE Antenna Connector

Quick specs

Item Type
Other IoT Boards
Operating Voltage (VDC)
3.3
Emersion Current(mA)
≤120
Current - Receiving
≤15
Sleep Current (uA)
≤1
Transmission Mode
FIFO/ DMA
See all specifications