Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP32 Based; input voltage (v) 3.3 to 5; max. working voltage (v) 3.3. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: ESP32 Based
  • Input Voltage (V): 3.3 to 5
  • Max. Working Voltage (V): 3.3

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeESP32 Based
Input Voltage (V)3.3 to 5
Max. Working Voltage (V)3.3
Charge Current Range (A)0.5
Dischage Current Range (A)0.6
WiFi Protocol802.11 b/g/n/d/e/I/k/r
SRAM520kB
Flash Memory16MB
Digital I/O Pins10
Frequency2.4~2.5GHz
Operating Temperature (°C)-40 to 85
Length (mm)58
Width (mm)29
Shipping Weight0.03 kg
Shipping Dimensions6 × 4 × 1 cm

Overview

The DFRobot FireBeetle ESP32 IoT Microcontroller (Supports Wi-Fi & Bluetooth), made by DFRobot, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: ESP32 Based
  • Input Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Max. Working Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Charge Current Range (A): 0.5 (quoted range is usually line-of-sight; walls and interference shorten it)
  • Dischage Current Range (A): 0.6 (quoted range is usually line-of-sight; walls and interference shorten it)
  • WiFi Protocol: 802.11 b/g/n/d/e/I/k/r (2.4 GHz reaches further, 5 GHz is faster at short range)
  • SRAM: 520kB
  • Flash Memory: 16MB (more memory leaves room for larger programs and buffers)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. The electric current is just 10μA in the deep-sleep mode. The main controller supports two power supply methods: USB and 3.7V external lithium battery. And both USB and external DC can charge the Lipo battery directly.

Firebeetle esp32 has made a special hardware design for Arduino IDE. You can make a download without switching boot-mode manually. It supports Arduino, IDF (linux), micropython etc. Moreover, FireBeetle made a pin mapping for Arduino IDE. It can be configured with Dx transport, compatible with arduino UNO and reduce the entry barrier.


Features:

  1. Compatible with products in the DFRobot FireBeetle serials
  2. Low-power consumption(the electricity current under ultra-low-power is 10μA)
  3. Quick Response(the top frequency is 400KHz)
  4. Cost-effective
  5. Small size, convenient to install

Useful Links:

Package Includes:

1 x DFRobot FireBeetle ESP32 IoT Microcontroller (Supports Wi-Fi & Bluetooth)

Quick specs

Item Type
ESP32 Based
Input Voltage (V)
3.3 to 5
Max. Working Voltage (V)
3.3
Charge Current Range (A)
0.5
Dischage Current Range (A)
0.6
WiFi Protocol
802.11 b/g/n/d/e/I/k/r
See all specifications