
1 / 5 · Click to enlarge
At a glance
Made by DFRobot, this thermocouples is a good fit for everyday home and hobby use. Main specs: item type Thermocouple Amplifier Module; model no. / name CT1780; rated voltage (vdc) 3.3 ~ 5.5 V DC. Check that your power source supplies 3.3 ~ 5.5 V DC before connecting it.
Key Highlights
- Item Type: Thermocouple Amplifier Module
- Model No. / Name: CT1780
- Rated Voltage (VDC): 3.3 ~ 5.5 V DC
Ideal For
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Thermocouple Amplifier Module |
|---|---|
| Model No. / Name | CT1780 |
| Rated Voltage (VDC) | 3.3 ~ 5.5 V DC |
| Typical accuracy (°C) | ≤ ±2°C (-200°C to 700°C); ±4°C (700°C to 1350°C) |
| Measurement Range | -270℃ ~ +1372℃ |
| Resolution | 14-bit / 0.25℃ |
| Measurement Error | ≤±2℃ (-200℃~700℃), ±4℃ (700℃~1350℃) |
| Communication Interface | Gravity Single Bus (1-Wire) |
| Operating Temperature (°C) | -40℃ ~ +125℃ |
| Length (mm) | 44 |
| Width (mm) | 22 |
| Weight (g) | ~120 |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 14 × 17 × 3 cm |
Overview
The DFRobot Gravity: CT1780 1-Wire K-Type Thermocouple Amplifier (-270℃ to +1372℃ Temp Range), made by DFRobot, is listed in our thermocouples range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Thermocouple Amplifier Module (your supply must deliver at least this much current)
- Model No. / Name: CT1780
- Rated Voltage (VDC): 3.3 ~ 5.5 V DC (match this to your power supply; too high a voltage can damage the part)
- Typical accuracy (°C): ≤ ±2°C (-200°C to 700°C); ±4°C (700°C to 1350°C)
- Measurement Range: -270℃ ~ +1372℃ (quoted range is usually line-of-sight; walls and interference shorten it)
- Resolution: 14-bit / 0.25℃
- Measurement Error: ≤±2℃ (-200℃~700℃), ±4℃ (700℃~1350℃)
- Communication Interface: Gravity Single Bus (1-Wire) (confirm your cable or board uses the same connector)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Gravity CT1780 is a cold-junction compensated thermocouple amplifier that makes monitoring extreme temperatures from -270℃ to +1372℃ straightforward and scalable. It accurately digitizes signals from a K-Type thermocouple, providing 0.25℃ resolution, and transmits the data over a simple 1-Wire communication bus. This 1-Wire protocol allows multiple sensors to be daisy-chained on a single data line, perfect for monitoring various zones in industrial ovens, ceramic kilns, or scientific flame analysis. An integrated DIP switch further simplifies identifying individual sensors in a multi-point network, making complex setups manageable.
Wiring Diagram of CT1780 amplifier & Arduino
Features:
- Ultra-wide temperature range from -270℃ to +1372℃
- Supports K-Type thermocouples
- 1-Wire single-bus communication for multi-sensor setups
- 14-bit resolution with 0.25℃ measurement steps
- Built-in cold-junction compensation
- Onboard DIP switch for sensor identification
- Compact and Gravity-compatible design
- Suitable for extreme industrial and DIY environments
Package Includes:
1 x DFRobot Gravity: CT1780 1-Wire K-Type Thermocouple Amplifier
1 x K Type Thermocouple
1 x Gravity 3pin cable
Quick specs
- Item Type
- Thermocouple Amplifier Module
- Model No. / Name
- CT1780
- Rated Voltage (VDC)
- 3.3 ~ 5.5 V DC
- Typical accuracy (°C)
- ≤ ±2°C (-200°C to 700°C); ±4°C (700°C to 1350°C)
- Measurement Range
- -270℃ ~ +1372℃
- Resolution
- 14-bit / 0.25℃



















