
At a glance
Made by DFRobot, this multi-brand raspberry pi cases is a good fit for makers, students and electronics hobbyists. Main specs: mounting hole diameter (mm) CM4; input power +5v; shipping weight 0.052 kg.
Key Highlights
- Small and easy to carry or mount
- Mounting Hole Diameter (mm): CM4
- Input Power: +5v
- Shipping Weight: 0.052 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Mounting Hole Diameter (mm) | CM4 |
|---|---|
| Input Power | +5v |
| Shipping Weight | 0.052 kg |
| Shipping Dimensions | 12 × 8 × 3 cm |
Overview
The DFRobot PiTray mini for Raspberry Pi Compute Module 4, made by DFRobot, is listed in our multi-brand raspberry pi cases range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Mounting Hole Diameter (mm): CM4
- Input Power: +5v
- Shipping Weight: 0.052 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 12 × 8 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
PiTray mini is a Model B liked carrier board for building cluster with Raspberry Pi Computed Module 4 (CM4). PiTray mini focuses on providing a neat and budget solution for CM4 applications. With the same outline and mounting holes with Raspberry Pi Model B, it can be stacked upon the existed cluster. CM4 got some advantages over Raspberry Pi 4B in industrial applications. With the variants that embed eMMC storage, no matter solo setup or cluster application would be much more reliable and fast on disk I/O. At the same time, since CM4 provides models without wifi and Bluetooth chip, the new cluster would be more efficient in energy consumption, the O/S could disable these modules to save its computing resource. What cluster builders look for is a minimal layout with solid module mounting with powering and Gigabit Ethernet. PiTray mini got all of that. Moreover, PiTray mini acts as a good starter kit for CM4. For CM4 variants with eMMC, there is an eMMC boot switch on board that just makes it a lot easier to flash Operation System image to eMMC, no need to spend time to figure out which pins should be connected to make the job done. It also includes a micro SD card socket to support CM4 Lite (without eMMC and requires a micro SD card). To fit Compute Module 4 on a business card size carrier, PiTray mini does not include DSI, CSI sockets, audio jack, dual micro HDMI or USB3.0 hub because they are seldom applied in cluster building. Instead, it provides only one USB2.0, full-size HDMI, and HAT connectors that come natively from the chip. So it would still work sufficiently and economically for HTPC maker, RetroPie fans, and the majority of regular Raspberry Pi users, offering a similar experience to Raspberry Pi Model B.
Features
- Most affordable option
- Energy-efficient
- Compatible with all Compute Module 4 boards
- Offers boot switching for normal and programming modes
- Can fit in most of the same cases as the Raspberry Pi IO board
Package include:
1 x DFRobot PiTray mini for Raspberry Pi Compute Module 4
Quick specs
- Mounting Hole Diameter (mm)
- CM4
- Input Power
- +5v
- Shipping Weight
- 0.052 kg
- Shipping Dimensions
- 12 × 8 × 3 cm



















