Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this bluetooth and nrf modules is a good fit for makers, students and electronics hobbyists. Main specs: item type DFRobot Module; switch/button Yes; operating frequecy 433Mhz.

Key Highlights

  • Wireless connection
  • Item Type: DFRobot Module
  • Switch/Button: Yes
  • Operating Frequecy: 433Mhz

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDFRobot Module
Switch/ButtonYes
Operating Frequecy433Mhz
Transmission Rate (kbps)10kbps
Encoding FormatEV1527
Output Power (W)13dBm
Modulation MethodOOK
Power Generation Energy600uJ
Module Size47x25x11mm(L*W*H) 1.85x0.98x0.43”
Press Down ForceTypical 1800g
Additional Specs.Action method: Automatically rebound after pressing down, Action distance: 2.6mm (endpoint)
Transmission DistanceIndoor 40M, Stable
Shipping Weight0.05 kg
Shipping Dimensions5 × 5 × 3 cm

Overview

The DFRobot Self-powered Wireless Switch (433Mhz), made by DFRobot, is listed in our bluetooth and nrf modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: DFRobot Module
  • Switch/Button: Yes
  • Operating Frequecy: 433Mhz (make sure the rest of your system works at this frequency)
  • Transmission Rate (kbps): 10kbps
  • Encoding Format: EV1527
  • Output Power (W): 13dBm
  • Modulation Method: OOK
  • Power Generation Energy: 600uJ

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

In life, remote controllers can be seen everywhere, and most of them are inseparable from the battery. However, we often encounter problems when using the battery, for instance, it is troublesome to replace the battery, batteries are easy to corrode in a humid environment, or the waste batteries may cause serious environmental pollution. Do you know that wireless remote control can actually work without batteries! This self-powered wireless switch from DFRobot can send signals wirelessly without installing a battery. The switch is composed of a micro-generator and a 433Mhz radio frequency circuit. Based on the principle of electromagnetic induction, the micro generator converts the kinetic energy of the press into electrical energy that will be rectified and stored by the RF circuit later, by which a signal can be transmitted wirelessly. It is suitable as a maintenance-free switch for long-term monitoring of changes in the state of pressing, collision, etc., such as making wireless doorbells, pagers, food ordering devices, wall switches, etc. A receiver is required when using this product. It is recommended to use it with our official Gravity: Digital Wireless Switch Receiver (433MHz), or other receivers that support EV1527 decoding format and 10Kbps decoding rate. Connection Diagram: Applications:
  • Wireless doorbells
  • Pagers
  • Food ordering devices
  • Wall switches

Features:

  1. No battery needed, maintenance-free
  2. Wireless signal, wiring-free
  3. RF signal, strong penetration
  4. Onboard 4-position DIP switch, adjustable 15 states
  5. 1 million sets of random address codes
  6. The lifetime of 100,000 presses
  7. Press Frequency: no more than 4 times per second, continuously rapid press will cause energy accumulation that cannot be consumed in time, and eventually burn the chip
  8. Distance Test Condition: Straighten the wire antenna of the transmitting module, and for the receiving module, use [Gravity: Digital wireless switch receiver(433MHz)]

Useful Links:


Package Includes:

1 x DFRobot Self-powered Wireless Switch (433Mhz)

Quick specs

Item Type
DFRobot Module
Switch/Button
Yes
Operating Frequecy
433Mhz
Transmission Rate (kbps)
10kbps
Encoding Format
EV1527
Output Power (W)
13dBm
See all specifications