Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact PWM signal generator with LCD display, adjustable from 1Hz to 150kHz and powered by 3.3–30V. It remembers your last settings after power-off and supports duty cycle adjustment for quick, repeatable testing.

Key Highlights

  • Adjustable PWM output from 1Hz to 150kHz
  • Bright LCD display shows frequency and settings
  • Wide 3.3–30V DC operating voltage range
  • Duty cycle adjustment with power-off memory
  • N76E003AT20 microcontroller for stable output
  • Compact 79 x 43mm module in a protective shell

Ideal For

  • Electronics hobbyists building and testing circuits
  • Students learning about PWM and signal generation
  • Repair technicians needing a quick signal source
  • Engineers prototyping motor control or LED dimming
  • Makers integrating PWM into Arduino or UART projects

Buying Tip

Confirm your project's required frequency range and supply voltage fall within 1Hz–150kHz and 3.3–30V before ordering, and remember you will need to supply your own DC power source.

Elecvora expert review

Our verdict

A practical, low-cost PWM source that covers a wide frequency range and remembers settings between uses. It is best suited to bench testing and educational work rather than precision laboratory applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 1Hz–150kHz frequency range
  • Clear LCD display for easy reading
  • Broad 3.3–30V input voltage
  • Power-off memory retains settings
  • Compact and protected by a shell

Cons

  • No power supply or cables included
  • Frequency accuracy of 2% may not suit precision work
  • Limited output current (5–30mA) for direct load driving

Best for

Hobbyists, students and technicians needing a simple adjustable PWM signal source

Not ideal for

Applications requiring high-precision frequency or high-current output

Specifications

Item TypeSignal Generator
Operating Voltage (VDC)3.3 to 30
Microcontroller ChipN76E003AT20
Frequency1Hz~150KHz
AccuracyFrequency 2%
Max. Operating Current (A)output current can be around 5~30ma
Operating Temperature (°C)-20 to 70°C
Length (mm)79
Width (mm)43
Weight (g)36
Shipping Weight0.039 kg
Shipping Dimensions8 × 5 × 3 cm

What's in the box

  • 1 x Digital PWM Generator with Display

Frequently Asked Questions

What is the frequency range of this PWM generator?
It can generate frequencies from 1Hz to 150kHz, adjustable via the on-board controls.
What power supply does it need?
It operates from a DC supply between 3.3V and 30V. No power supply is included, so you will need to provide one.
Can I adjust the duty cycle?
Yes, the duty cycle is adjustable, and the last used setting is retained after power-off thanks to the memory function.
What is included in the package?
The package contains 1 x Digital PWM Generator with Display. Cables and power supplies are not included.
Does it support UART communication?
Yes, the module supports UART. You can connect it to compatible serial devices, but wiring and protocol details are not specified in the product data.
What is the output current capability?
The output current is approximately 5–30mA, suitable for driving logic-level inputs and small loads. Check your target device's requirements before connecting.

Overview

The Digital PWM Generator with Display is a self-contained signal source for anyone who needs a controllable pulse-width modulation output without building one from scratch. It is built around the N76E003AT20 microcontroller and housed in a protective shell, with a bright LCD that shows the current frequency and settings. The output frequency is adjustable from 1Hz to 150kHz, and the duty cycle can be changed to suit the task at hand. Power-off memory keeps your last configuration, so you can return to the same test conditions quickly.

Key Features

  • Bright LCD display for clear reading of settings
  • Adjustable frequency output from 1Hz to 150kHz
  • Duty cycle adjustment for flexible pulse control
  • Power-off memory retains the last used settings
  • UART support for integration with other devices
  • Wide 3.3–30V DC operating voltage

Specifications Explained

Frequency range (1Hz–150kHz): Covers slow pulses for timing tests up to fast signals for switching and modulation experiments. Frequency accuracy is stated at 2%, which is suitable for general testing and hobby work.

Operating voltage (3.3–30V DC): The module accepts a broad range of supply voltages, so it can run from common 5V, 12V or 24V sources. The output current is around 5–30mA, enough to drive logic-level inputs and small loads directly.

Microcontroller (N76E003AT20): A dedicated microcontroller generates the PWM signal, keeping the output consistent across the supported frequency range.

Size and weight: At 79 x 43mm and 36g, the module is small enough to sit on a bench or fit into an enclosure, and the protective shell helps prevent accidental damage.

Compatibility and Requirements

The generator requires a DC power source within the 3.3–30V range; no battery or power supply is included. UART support allows connection to compatible microcontrollers or serial devices, but wiring and protocol details are not specified here. The output is a logic-level PWM signal, so check that your target device accepts the voltage and current levels before connecting.

Typical Uses

  • Testing servo motors, motor drivers and LED dimming circuits
  • Signal injection for troubleshooting audio and switching circuits
  • Educational projects demonstrating PWM and duty cycle
  • Bench testing of counters, tachometers and frequency inputs

What's in the Box

1 x Digital PWM Generator with Display.

Digital PWM Generator with Display

Quick specs

Item Type
Signal Generator
Operating Voltage (VDC)
3.3 to 30
Microcontroller Chip
N76E003AT20
Frequency
1Hz~150KHz
Accuracy
Frequency 2%
Max. Operating Current (A)
output current can be around 5~30ma
See all specifications