
1 / 3 · Click to enlarge
AI Summary
The DSO138 is a DIY oscilloscope kit you solder together, featuring a 2.4″ TFT screen and 200kHz bandwidth. It's a hands-on way to learn electronics while gaining a portable diagnostic tool.
Key Highlights
- 2.4-inch colour TFT display for clear waveform viewing
- 200kHz analog bandwidth and 1Msps sample rate
- 12-bit vertical accuracy with 10mV/div to 5V/div sensitivity
- Selectable DC, AC or GND coupling for flexible measurements
- Includes 1Hz/3.3V square wave test signal source
- DIY soldering kit with ARM Cortex-M3 processor
Ideal For
- Electronics beginners learning to solder
- Students and educators in physics or engineering
- Makers and hobbyists building custom circuits
- Anyone wanting a portable, low-cost oscilloscope
- DIY enthusiasts interested in secondary development
Buying Tip
Remember to order a 9V DC power adapter separately, as it is not included and is required to power the kit after assembly.
Elecvora expert review
Our verdict
The DSO138 is a rewarding DIY project that yields a functional pocket oscilloscope. It offers a great balance of education and practicality for low-frequency work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Hands-on soldering experience
- Clear 2.4-inch colour display
- 12-bit resolution for its class
- Multiple trigger modes and parameter readouts
Cons
- Requires assembly and soldering skills
- Needs a separate 9V DC power supply
- Limited to 200kHz bandwidth
Best for
Electronics learners and hobbyists wanting an affordable, educational oscilloscope
Not ideal for
Professionals needing high-bandwidth or advanced analysis
Specifications
| Item Type | Oscilloscope |
|---|---|
| Operating Voltage (VDC) | 9 |
| Model No. / Name | DSO138 |
| Impedance (Ω) | 1MΩ |
| Sampling Buffer Depth | 1024 bytes |
| Additional Specs. | Analog Bandwidth: 0-200KHz |
| Vertical Sensitivity | 10mV / Div - 5V / Div (1-2-5 progressive manner) |
| Accuracy | 12Bit |
| Coupling Type | DC / AC / GND |
| Length (mm) | 118 |
| Width (mm) | 77 |
| Weight (g) | 130 |
| Sample Rate | 1Msps |
| Shipping Weight | 0.14 kg |
| Shipping Dimensions | 17 × 12 × 3 cm |
What's in the box
- 1 x DSO138 DIY Digital Oscilloscope Kit (unassembled components)
- 1 x Probe
Frequently Asked Questions
Do I need to solder the kit?
What power source does it require?
What is included in the package?
Can I use it for measuring higher voltages?
Is there a warranty?
Can the firmware be modified?
Overview
The DSO138 is a soldering kit that builds into a handheld digital oscilloscope. It is designed for anyone who wants to learn electronics by assembling their own test instrument. Once complete, the oscilloscope provides a 2.4-inch colour TFT screen and a range of measurement functions, making it suitable for basic signal analysis in workshops, classrooms and home labs.
Key Features
- 2.4-inch TFT display shows waveforms and parameter readouts clearly.
- ARM Cortex-M3 processor (STM32F103C8) handles signal processing and display control.
- Multiple trigger modes include automatic, regular and one-shot, plus rising or falling edge triggering.
- HOLD function freezes the display at any time for closer inspection.
- Negative delay lets you observe the waveform before the trigger point.
- Digital parameter display shows frequency, period, pulse width, duty ratio, maximum, minimum, average, peak-to-peak and virtual values.
- Built-in test signal provides a 1Hz/3.3V square wave for quick calibration checks.
Specifications Explained
Analog bandwidth (0–200kHz): This indicates the range of signal frequencies the oscilloscope can accurately display. It is well suited to audio, low-frequency control signals and many hobbyist projects.
Sample rate (1Msps): The oscilloscope takes one million samples per second, which is adequate for capturing waveforms within its bandwidth.
Vertical sensitivity (10mV/Div – 5V/Div): You can adjust the display to show small signals clearly or accommodate larger voltages, with settings in a 1-2-5 sequence.
Accuracy (12-bit): The analog-to-digital converter resolves the input into 4096 levels, giving finer detail than 8-bit oscilloscopes.
Coupling (DC/AC/GND): Choose DC coupling to see the full signal including any offset, AC coupling to block DC and view only the varying part, or GND to establish a zero reference.
Input impedance (1MΩ): This standard impedance minimises loading on most circuits under test.
Buffer depth (1024 bytes): The memory stores a snapshot of the waveform for display and analysis.
Operating voltage (9V DC): The kit requires a 9V DC power source, which is not included.
Compatibility and Requirements
The DSO138 kit requires assembly by soldering. A 9V DC power supply must be provided separately; the kit does not include a battery or power adapter. The included probe connects to the input terminal. No other accessories are required for basic operation.
Typical Uses
- Learning electronics and soldering through hands-on assembly.
- Visualising waveforms in low-voltage circuits, such as audio or microcontroller projects.
- Educational demonstrations in classrooms or workshops.
- Basic troubleshooting and signal tracing in hobby electronics.
- Secondary development: the kit can be modified into a millivoltmeter or data logger with additional coding.
What's in the Box
- 1 x DSO138 DIY Digital Oscilloscope Kit (unassembled components)
- 1 x Probe

Quick specs
- Item Type
- Oscilloscope
- Operating Voltage (VDC)
- 9
- Model No. / Name
- DSO138
- Impedance (Ω)
- 1MΩ
- Sampling Buffer Depth
- 1024 bytes
- Additional Specs.
- Analog Bandwidth: 0-200KHz













