
1 / 3 · Click to enlarge
AI Summary
A 10.1-inch industrial HMI IPS TFT display with 1024 x 600 resolution and durable capacitive touch. Its T5L2 platform, onboard flash and UART plus SD card interfaces make it a practical screen for embedded control and automation projects.
Key Highlights
- 10.1-inch IPS TFT panel at 1024 x 600 with 16.7M colours
- Capacitive G+G touch with smooth multi-slide interaction
- T5L2 ASIC platform for stable, low-power operation
- 32MB NOR and 512MB NAND flash for UI and media storage
- UART, RGB, SD card and I2C touch interfaces
- Wide 7V to 36V input with 12V typical operation
Ideal For
- Industrial automation engineers building control panels
- Embedded developers needing a UART-driven HMI screen
- Machine builders replacing text displays with a graphical interface
- System integrators working on smart control installations
- Makers building equipment front ends with SD card asset loading
Buying Tip
Confirm your controller supports UART, RGB or I2C touch before ordering, and check that your enclosure fits the 222.7 x 125.3 mm module and its 7V to 36V supply.
Elecvora expert review
Our verdict
A solid 10.1-inch HMI module for teams that want a readable IPS panel, capacitive touch and generous onboard storage without building display electronics from scratch. The T5L2 platform and wide voltage input make integration predictable for industrial and embedded projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Sharp 1024 x 600 IPS panel with wide viewing angles
- Capacitive G+G touch with multi-slide support
- 32MB NOR plus 512MB NAND flash on board
- Flexible 7V to 36V input range
- UART, RGB, SD card and I2C touch interfaces
Cons
- 200 nits brightness limits use in very bright environments
- No enclosure or mounting hardware included
- Requires host-side configuration and wiring work
Best for
Industrial control panels and embedded equipment interfaces
Not ideal for
Outdoor installations needing high-brightness sunlight readability
Specifications
| Shipping Weight | 0.697 kg |
|---|---|
| Shipping Dimensions | 29 × 16 × 5 cm |
What's in the box
- 1 x DWIN DMG10600T101_41WTC 10.1 Inch HMI IPS TFT Display
Frequently Asked Questions
What interfaces does this display support?
What voltage does the display need?
How much storage is built in?
What is included in the package?
What temperature range can it handle?
How should I care for the touch surface?
Overview
The DWIN DMG10600T101_41WTC is a 10.1-inch HMI display intended for embedded control and industrial interface design. Its IPS TFT panel delivers a 1024 x 600 resolution image with 16.7 million colours, and the capacitive G+G touch layer supports smooth multi-slide gestures. At the centre is the T5L2 ASIC platform, which DWIN builds for secure, low-power operation with strong EMC/EMI resistance.
Storage is handled on board: 32MB of NOR flash and 512MB of NAND flash give room for interfaces, fonts and multimedia content, and an SD card slot covers data and firmware operations. The module accepts 7V to 36V, typically 12V, making it straightforward to integrate into equipment that already runs a 12V rail.
Key Features
- 10.1-inch IPS TFT LCD with 1024 x 600 pixel resolution
- 16.7M colours (24-bit RGB) for accurate colour reproduction
- Capacitive touch with multi-slide support and high durability
- 85°/85°/85°/85° viewing angles for off-axis readability
- Onboard 32MB NOR and 512MB NAND flash
- UART, RGB, SD card and I2C touch interfaces
- LED backlight rated for more than 30,000 hours
Specifications Explained
Display and touch
The 1024 x 600 panel with a 222.72 x 125.28 mm active area gives a wide, readable canvas for dashboards, menus and status screens. Brightness is rated at 200 nits, and the four-way 85° viewing angle keeps content legible from the sides of a panel or console. Capacitive touch means a light finger press rather than pressure, and the G+G construction is chosen for repeated use.
Processing and memory
The T5L2 ASIC handles display driving and interface logic. The 32MB NOR flash is suited to program and UI storage, while the 512MB NAND flash holds larger assets such as fonts, images and multimedia. An SD card slot adds removable storage for data and firmware updates.
Power and environment
Operating voltage spans 7V to 36V with a 12V typical figure, and current draw is 320mA when the display is on and 140mA when off. The module is rated for -20°C to 70°C operation and -30°C to 80°C storage, which covers most indoor industrial and commercial installations.
Compatibility and Requirements
The display communicates over UART and also provides RGB, SD card and I2C touch connections, so it needs a host controller or device that supports one of these interfaces. It requires a DC supply within the 7V to 36V range; 12V is typical. Because the panel is a bare HMI module, plan for mounting, wiring and enclosure work as part of your integration.
Typical Uses
- Industrial automation and machine control panels
- Smart control systems and building interfaces
- Embedded equipment front ends and status displays
- Multimedia interface points in commercial devices
What's in the Box
1 x DWIN DMG10600T101_41WTC 10.1 Inch HMI IPS TFT Display.



















