Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by ELECROW, this current and voltage sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Current Sensor 2.0; operating voltage 5V/3.3V; detection range DC0.02445 V - 25 V. Check that your power source supplies 5V/3.3V before connecting it.

Key Highlights

  • Item Type: Current Sensor 2.0
  • Operating Voltage: 5V/3.3V
  • Detection range: DC0.02445 V - 25 V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCurrent Sensor 2.0
Operating Voltage5V/3.3V
Detection rangeDC0.02445 V - 25 V
Length (mm)40
Width (mm)20
Weight (g)6g
Shipping Weight0.012 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The Elecrow Crowtail - Current Sensor 2.0, made by ELECROW, is listed in our current and voltage sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Current Sensor 2.0 (your supply must deliver at least this much current)
  • Operating Voltage: 5V/3.3V (match this to your power supply; too high a voltage can damage the part)
  • Detection range: DC0.02445 V - 25 V (quoted range is usually line-of-sight; walls and interference shorten it)
  • Length (mm): 40 (measure your mounting space before ordering)
  • Width (mm): 20 (measure your mounting space before ordering)
  • Weight (g): 6g (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 7 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This Elecrow Crowtail - Current Sensor 2.0 gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The Elecrow Crowtail - Current Sensor 2.0 measures up to 20A of DC or AC current. The ACS712 Low Current Sensor Breakout outputs an analog voltage that varies linearly with sensed current. To calibrate, first set the output offset to the desired level (with zero current on the sense lines, read output with a DVM). Then with a known current input (a 100mA limited supply works well for this), set the output deflection with the gain pot. Sensitivity is then calculated as (Vref - Vdeflect)/(current input).

Features:

  1. Light & Luminance Sensors: Detect light intensity.
  2. Vibration Sensor: Detects movement/vibrations.
  3. Voltage/Current Sensors: Monitors voltage and current in circuits.
  4. Collision Sensor: Detects impacts.

Package Includes:

1 x Crowtail- Current Sensor

1 X Crowtail 4 Pin Cable

Quick specs

Item Type
Current Sensor 2.0
Operating Voltage
5V/3.3V
Detection range
DC0.02445 V - 25 V
Length (mm)
40
Width (mm)
20
Weight (g)
6g
See all specifications