
1 / 5 · Click to enlarge
AI Summary
The Emax ECO 1404-4800KV is a lightweight 8.6g brushless motor for 2.5 to 4 inch FPV builds. Its 4800KV winding and 9N12P framework deliver responsive power in a compact 18.8mm package.
Key Highlights
- 4800KV brushless winding for quick throttle response on small props
- 9N12P framework for smooth, efficient motor operation
- Weighs only 8.6g without silicone wire for lightweight builds
- Fits 2.5 to 4 inch propellers for flexible small-quad setups
- 1.5mm prop shaft with 2mm bearing shaft and CW thread
- Compact 18.8mm diameter and 19.75mm length for tight frames
Ideal For
- FPV pilots building lightweight 2.5 to 4 inch quads
- Hobbyists refreshing motors on a small freestyle or cruiser
- Micro cinematic builders keeping AUW low
- Pilots keeping spare motors in a field kit
- Makers assembling compact multirotor platforms
Buying Tip
Check your frame's motor mounting pattern and prop shaft size against the 18.8mm diameter, 19.75mm length and 1.5mm prop shaft before ordering, and buy one motor per arm plus a spare.
Elecvora expert review
Our verdict
A sensible small-format motor for pilots who want an affordable Emax option for 2.5 to 4 inch builds. The 4800KV winding and 8.6g weight suit lightweight quads where compact size matters more than outright thrust.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Light 8.6g weight without silicone wire
- Flexible 2.5 to 4 inch prop range
- Compact 18.8mm diameter fits tight frames
- Simple CW shaft thread for prop nuts
- Affordable Emax brushless design
Cons
- Silicone wire is not included in the stated weight
- No mounting hardware or extra accessories listed
- High 4800KV suits small props rather than large ones
Best for
Lightweight 2.5 to 4 inch FPV builds and spare motor kits
Not ideal for
Large-prop or heavy-lift multirotors needing low-KV motors
Specifications
| Motor KV (RPM/V) | 4800 KV |
|---|---|
| Motor Type | Brushless Motor |
| Framework | 9N12P |
| Length (mm) | 19.75mm |
| Diameter (mm) | 18.8mm |
| Compatible Prop (inch) | 2.5" - 4" |
| Weight (g) | 8.6g (W/O Silicone Wire) |
| Prop Shaft (mm) | 1.5mm |
| Bearing Shaft | 2mm |
| Shaft Thread | CW |
| Shipping Weight | 0.019 kg |
| Shipping Dimensions | 8 × 8 × 2 cm |
What's in the box
- 1 x Emax ECO 1404-4800KV Brushless Motor
Frequently Asked Questions
What size propellers does this motor use?
What does the 4800KV rating mean for my build?
Is silicone wire included with the motor?
What shaft sizes should I check before buying?
How many motors come in one order?
How should I care for these motors?
Overview
The Emax ECO 1404-4800KV is a small-format brushless motor intended for lightweight FPV multirotors running 2.5 to 4 inch propellers. Emax has built the ECO line around affordable, dependable components, and this 1404-size motor follows that approach with a compact body, a 4800KV winding and a modest 8.6g weight without silicone wire.
For pilots working on sub-4-inch quads, weight and size matter as much as power. The 18.8mm diameter and 19.75mm length keep the motor within tight frame clearances, while the 1.5mm prop shaft and 2mm bearing shaft match common small-prop hardware. The CW shaft thread means the prop nut tightens in the conventional direction, which simplifies installation on builds that use CW-threaded motors.
Key Features
- 4800KV brushless winding: a high-KV configuration aimed at small props that need fast spin-up.
- 9N12P framework: a 9-stator-slot, 12-pole arrangement for smooth running characteristics.
- Lightweight construction: 8.6g without silicone wire helps keep AUW low on small builds.
- Prop range of 2.5 to 4 inches: one motor size can serve several small-quad configurations.
- Compact footprint: 18.8mm diameter and 19.75mm length fit narrow arm layouts.
- Shaft dimensions: 1.5mm prop shaft and 2mm bearing shaft for standard small-prop mounting.
Specifications Explained
KV rating describes how fast the motor turns per volt applied, so a 4800KV motor spins quickly and suits smaller, lighter props rather than large slow-turning blades. Framework 9N12P refers to the stator and magnet layout; it is a common brushless configuration that helps deliver steady torque across the throttle range.
The 1.5mm prop shaft and 2mm bearing shaft are the dimensions to check against your props and mounts before ordering. The CW shaft thread indicates the direction the prop nut threads on. Because the motor weighs only 8.6g without silicone wire, remember to account for wire and connectors when estimating your final build weight.
Compatibility and Requirements
This motor is specified for propellers between 2.5 and 4 inches. It requires a suitable brushless ESC and motor wires soldered or connected to your power system; silicone wire is not included in the stated weight. Confirm that your frame arms and motor mounting pattern accept the 18.8mm motor diameter and 19.75mm length, and check that your props fit the 1.5mm prop shaft. The motor ships as a single unit, so plan quantities around your frame layout.
Typical Uses
The ECO 1404-4800KV suits small freestyle and cruising quads, lightweight cinematic micro platforms and compact builds where a 2.5 to 4 inch prop is used. It also works as a replacement motor for an existing sub-4-inch quad or as a spare in a pilot's field kit.
What's in the Box
- 1 x Emax ECO 1404-4800KV Brushless Motor
Quick specs
- Motor KV (RPM/V)
- 4800 KV
- Motor Type
- Brushless Motor
- Framework
- 9N12P
- Length (mm)
- 19.75mm
- Diameter (mm)
- 18.8mm
- Compatible Prop (inch)
- 2.5" - 4"




















