
1 / 4 · Click to enlarge
AI Summary
A lightweight 1600KV brushless motor for 4- to 5-inch long-range and endurance drones. It runs on 4S to 6S LiPo and delivers up to 950g of thrust on 6S while weighing only 16.6g.
Key Highlights
- 1600KV wind tuned for long-range and endurance multirotors
- Runs on 4S to 6S LiPo packs for flexible build options
- 12N14P stator layout for smooth, efficient power delivery
- Up to 950g maximum thrust on 6S
- Fits 4-inch to 5-inch propellers
- Lightweight at 16.6g without silicone wire
Ideal For
- Long-range FPV pilots building 4- to 5-inch quads
- Endurance-focused multirotor builders
- Cinematic pilots wanting smooth, efficient power
- Pilots upgrading worn motors on existing frames
- Hobbyists assembling lightweight 6S cruisers
Buying Tip
Check that your ESC and frame accept a 24.7mm diameter motor and 4- to 5-inch props before ordering, and confirm your intended LiPo cell count.
Elecvora expert review
Our verdict
The ECOII-2004-1600KV is a sensible, lightweight motor for endurance and long-range builds that do not need race-level punch. Its 4S-6S flexibility and 950g thrust ceiling on 6S make it easy to plan around.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Light 16.6g weight without wire
- Flexible 4S to 6S battery support
- Smooth 12N14P power delivery
- Up to 950g thrust on 6S
- Mounting hardware included
Cons
- Requires soldering to an ESC
- Only suits 4- to 5-inch propellers
- No silicone wire included with the motor
Best for
Long-range and endurance 4- to 5-inch builds
Not ideal for
High-KV racing or large-prop heavy-lift platforms
Specifications
| Motor KV (RPM/V) | 1600 KV |
|---|---|
| Motor Type | Brushless Motor |
| Compatible LiPO Batteries | 4S to 6S |
| Framework | 12N14P |
| Length (mm) | 19.2mm |
| Diameter (mm) | 24.7mm |
| Maximum Thrust (gm) | 950g(on 6s) |
| Compatible Prop (inch) | 4″-5″ |
| Weight (g) | 16.6g (w/o silicone wire) |
| Shaft Diameter | 1.5 mm |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 7 × 4 × 4 cm |
What's in the box
- 5 x M2 x 6mm screws
- 5 x M2 x 7.5mm screws
- 3 x M2 x 8.5mm screws
- 1 x washer and screw for shaft
Frequently Asked Questions
What battery should I use with this motor?
Which propellers fit this motor?
How much thrust does it produce?
What is included in the package?
Does it come with wires attached?
What does 1600KV mean?
Overview
The Emax ECOII-2004-1600KV is a brushless motor aimed at pilots who value flight time and smooth control over raw racing aggression. With a 1600KV wind, a 12N14P framework and support for 4S to 6S LiPo batteries, it slots neatly into 4- to 5-inch long-range and endurance builds. The compact 24.7mm diameter and 19.2mm length keep the motor tidy on the arm, and at 16.6g without silicone wire it helps keep overall weight in check.
Key Features
- 1600KV wind: a moderate KV rating suited to efficient cruising and longer flights.
- 12N14P framework: a 12-stator, 14-pole layout for smooth torque delivery.
- 4S to 6S LiPo compatibility: choose your pack voltage to match the build.
- Up to 950g thrust on 6S: enough pull for steady 4- to 5-inch propeller setups.
- 1.5mm shaft: a slim shaft matched to small prop hubs.
- Light 16.6g body: keeps endurance-focused frames lean.
Specifications Explained
The 1600KV rating describes how fast the motor spins per volt applied. In practice it sits in the endurance-friendly range, favouring controlled throttle and longer flight times rather than the high-RPM spikes of race motors. The 12N14P configuration refers to 12 stator arms and 14 permanent magnets, a common layout that balances torque and smoothness.
Battery support from 4S to 6S gives builders room to tune performance: lower cell counts for gentler, lighter setups and 6S for the full 950g thrust figure. Propeller compatibility is listed at 4 to 5 inches, so match prop size to your frame and voltage. The 1.5mm shaft and 24.7mm diameter suit compact frames, and the 16.6g weight without wire is worth factoring into your all-up weight budget.
Compatibility and Requirements
Use this motor with 4S to 6S LiPo batteries and 4- to 5-inch propellers. It is a brushless motor, so it requires a compatible brushless ESC and flight controller setup, plus soldering of the motor wires to your ESC. Mounting hardware is supplied in the package.
Typical Uses
This motor suits long-range cruising quads, endurance builds and cinematic platforms where steady, efficient flight matters more than burst acceleration. Its moderate KV and light weight make it a sensible pick for pilots covering distance or stretching airtime on 4- to 5-inch frames.
What's in the Box
- 5 x M2 x 6mm screws
- 5 x M2 x 7.5mm screws
- 3 x M2 x 8.5mm screws
- 1 x washer and screw for the shaft


Quick specs
- Motor KV (RPM/V)
- 1600 KV
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 4S to 6S
- Framework
- 12N14P
- Length (mm)
- 19.2mm
- Diameter (mm)
- 24.7mm


















