
1 / 4 · Click to enlarge
AI Summary
A 1700KV, 28xx brushless motor from Emax designed for 6 to 7 inch long-range and endurance drones. It pairs N52SH arc magnets with a 12mm bearing to deliver up to 2100g of thrust on 4S while drawing 15A continuous.
Key Highlights
- 1700KV wind tuned for efficient 6 to 7 inch propeller setups
- 28xx stator with N52SH curved arc magnets for stronger torque
- Rated 15A continuous and 50A peak current at 14.8V
- Up to 2100g maximum thrust per motor on 4S
- 47.9g weight without silicone wire and 19x19mm mounting
- 12mm bearing and rounded bell for smooth, durable operation
Ideal For
- Long-range FPV pilots flying 6 to 7 inch quads
- Endurance builders prioritizing flight time over top speed
- Cinematic pilots needing smooth, reliable thrust
- Pilots upgrading from older ECO series motors
- Hobbyists assembling affordable 4S multirotors
Buying Tip
Confirm your frame uses a 19x19mm motor mount and that your ESCs are rated for at least 50A peaks before buying this motor.
Elecvora expert review
Our verdict
The ECOII-2807-1700KV is a sensible, affordable choice for 6 to 7 inch endurance builds where efficiency and durability matter more than peak racing performance. Its N52SH magnets, 12mm bearing and reinforced bell make it a solid step up from older budget motors.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Efficient 1700KV wind for 6 to 7 inch props
- N52SH arc magnets improve torque and response
- Large 12mm bearing for smooth running
- Reinforced rounded bell for durability
- Up to 2100g thrust on 4S
Cons
- Silicone wire not included in the quoted weight
- Not intended for high-KV racing builds
- Requires soldering and correct ESC matching
Best for
Long-range and endurance 6 to 7 inch multirotors
Not ideal for
Racing quads needing very high KV and small props
Specifications
| Motor KV (RPM/V) | 1700 KV |
|---|---|
| Motor Type | Brushless Motor |
| Current (A) | 15A |
| Operating Voltage (V) | 14.8V |
| Peak Current (A) | 50A |
| Motor Stator Size | 28xx |
| Maximum Thrust (gm) | 2100g (on 4s) |
| Compatible Prop (inch) | 6″-7″ |
| Weight (g) | 47.9G(W/O silicone wire) |
| Prop Adapter Shaft Thread | M5 |
| Shipping Weight | 0.073 kg |
| Shipping Dimensions | 8 × 4 × 4 cm |
What's in the box
- 1 x Emax ECOII-2807-1700KV Brushless Motor
Frequently Asked Questions
What propellers does this motor support?
What voltage should I run it on?
How much current does it draw?
What is included in the package?
What mounting pattern does it use?
How should I care for the motor?
Overview
The Emax ECOII-2807-1700KV is a brushless motor aimed at long-range and endurance multirotor builds. Emax rebuilt the ECO II platform with a rounded bell, thicker reinforcement points and a mirror-polished finish, so the motor looks clean and handles the knocks of regular flying. Inside, N52SH curved arc magnets replace older magnet grades, tightening the air gap and improving throttle response and torque.
With a 1700KV wind and a 28xx stator, this motor is intended for 6 to 7 inch propellers on 4S setups. It weighs 47.9g without silicone wire and uses a 19x19mm mounting pattern.
Key Features
- N52SH arc magnets: curved magnets sit closer to the stator for better torque and higher RPM capability.
- Rounded bell design: thicker reinforcements around the bell add durability without excess weight.
- 12mm bearing: a large bearing supports smooth rotation and long service life.
- Reflective finish: the polished surface gives the motor a modern, clean look.
- Standard mounting: the 19x19mm pattern fits common frames in this class.
Specifications Explained
1700KV describes RPM per volt. On a 14.8V 4S pack the motor turns at a moderate speed, which suits larger 6 to 7 inch props that need torque rather than extreme RPM. 28xx stator refers to the stator dimensions in this motor class, giving more magnetic material for thrust and efficiency than smaller stators.
Current ratings of 15A continuous and 50A peak tell you the motor can handle bursts during aggressive throttle while staying within a sensible range for typical 4S endurance builds. Maximum thrust of 2100g on 4S gives a useful reference point when estimating total lift across four motors. The M5 prop adapter thread matches common 6 to 7 inch prop nuts.
Compatibility and Requirements
This motor is specified for 6 to 7 inch propellers and a 14.8V operating voltage. It uses a 19x19mm motor mounting pattern, so check your frame arms before installing. Silicone wire is not included in the quoted 47.9g weight, so plan your wiring and soldering accordingly. ESC selection should account for the 15A continuous and 50A peak current figures.
Typical Uses
The ECOII-2807-1700KV suits long-range cruisers, endurance quads and cinematic platforms that value flight time and smooth control over outright racing speed. It also works well for heavier 6 to 7 inch builds that need consistent thrust at moderate throttle.
What's in the Box
- 1 x Emax ECOII-2807-1700KV Brushless Motor
Quick specs
- Motor KV (RPM/V)
- 1700 KV
- Motor Type
- Brushless Motor
- Current (A)
- 15A
- Operating Voltage (V)
- 14.8V
- Peak Current (A)
- 50A
- Motor Stator Size
- 28xx



















