Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FNIRSI, this signal generator module & oscilloscopes is a good fit for makers, students and electronics hobbyists. Main specs: item type Oscilloscope; no. of channels 2; display 2.8-inch, 320x240 HD LCD. Check that your power source supplies 0-999.9 before connecting it.

Key Highlights

  • Item Type: Oscilloscope
  • No. of Channels: 2
  • Display: 2.8-inch, 320x240 HD LCD

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOscilloscope
No. of Channels2
Display2.8-inch, 320x240 HD LCD
Batteries Required3000mAh rechargeable Li-ion
Charging PortType-C, 5V/1A
Bandwidth10
Sample Rate50MSa/s
Input Voltage (VDC)0-999.9
Capacitance0-99.99mF
Operating Temperature Max-55 to 1300
Operating Frequency (MHz)2
Output WaveformSine, Square, Triangle, Full, Half, Noise, DC
Resistance (Ohm)0-99.99
Shipping Weight0.664 kg
Shipping Dimensions26 × 14 × 10 cm

Overview

The FNIRSI 2C23T 3-in-1 Handheld Oscilloscope Multimeter DDS Generator Channels, 10MHz Bandwidth, made by FNIRSI, is listed in our signal generator module & oscilloscopes range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Oscilloscope
  • No. of Channels: 2
  • Display: 2.8-inch, 320x240 HD LCD (measured diagonally; compare with the space you have before ordering)
  • Batteries Required: 3000mAh rechargeable Li-ion
  • Charging Port: Type-C, 5V/1A (check which plug or cable it needs)
  • Bandwidth: 10 (measure your mounting space before ordering)
  • Sample Rate: 50MSa/s (your supply must deliver at least this much current)
  • Input Voltage (VDC): 0-999.9 (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The FNIRSI handheld oscilloscope combines oscilloscope, multimeter, and signal generator functions in one device. It offers a 10MHz bandwidth, 50MSa/s sampling rate, and ±400V maximum measurement voltage. The oscilloscope has a 2.8-inch HD LCD display and built-in 3000mAh battery for up to 6 hours of use. With automatic measurement, waveform storage, and export capabilities, it is ideal for professionals and hobbyists alike.

Features:

  1. Oscilloscope Mode: 2-channel, 10MHz bandwidth, 50MSa/s sampling rate, auto/normal/single trigger modes, and vertical sensitivity from 200mv/div to 10v/div.
  2. Multimeter Mode: 4-digit 10000 counts for AC/DC voltage and current, resistance, capacitance, and temperature measurements.
  3. Signal Generator: Maximum output frequency of 2MHz with seven waveform types (sine, square, triangle, full, half, noise, DC).
  4. Design and Display: FPGA+MCU+ADC architecture, high-voltage protection, 2.8-inch 320x240 HD LCD, 3000mAh rechargeable battery, Type-C charging.
  5. Data Storage and Export: One-click save function with waveform image storage and export via Type-C connection.
  6. Versatile Usage: Ideal for professionals, factories, schools, hobbyists, and home use.

Package Includes:

1 x FNIRSI 2C23T 3-in-1 Handheld Oscilloscope Multimeter DDS Generator Channels, 10MHz Bandwidth

Quick specs

Item Type
Oscilloscope
No. of Channels
2
Display
2.8-inch, 320x240 HD LCD
Batteries Required
3000mAh rechargeable Li-ion
Charging Port
Type-C, 5V/1A
Bandwidth
10
See all specifications

More from FNIRSI

View all →

Related Products

View all →