
1 / 3 · Click to enlarge
AI Summary
A lightweight 5.8GHz RHCP omni antenna with an RP-SMA connector and 2.6dBi gain for stable FPV video. At just 7.8g, it adds range-friendly signal coverage without weighing down your quad.
Key Highlights
- 5.8GHz operation with wide 5.5G to 6GHz bandwidth
- 2.6dBi gain in a compact omnidirectional design
- RHCP polarization for circularly polarized FPV systems
- Low 1.07 SWR at center frequency for a clean match
- Weighs only 7.8g with an 11 x 60mm PC+ABS body
- RP-SMA connector fits compatible FPV gear
Ideal For
- FPV racing pilots flying 5.8GHz video systems
- Freestyle quad builders wanting a lightweight omni antenna
- Pilots replacing a damaged or worn RP-SMA antenna
- Hobbyists running circularly polarized FPV setups
Buying Tip
Confirm your VTX, receiver or goggles use an RP-SMA connector, not standard SMA, before ordering this antenna.
Elecvora expert review
Our verdict
The Lollipop 4 is a sensible pick for pilots who want a light, efficient 5.8GHz omni antenna with solid electrical figures. It is simple to fit and keeps weight low, though it is not a long-range directional solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very light at 7.8g
- Low 1.07 SWR and 0.98 radiation efficiency
- Wide 5.5G to 6GHz bandwidth
- RHCP with axial ratio close to 1
- Durable PC+ABS housing
Cons
- Only fits RP-SMA equipment
- Omni design offers less directional reach than a patch antenna
Best for
Racing and freestyle pilots using 5.8GHz RHCP FPV systems
Not ideal for
Pilots needing a long-range directional antenna or SMA connectors
Specifications
| Item Type | Antenna |
|---|---|
| Connector Type | RP-SMA |
| Frequency (GHz) | 5.8 |
| Gain | 2.6dBi |
| Axial Ratio | Close to 1 |
| Bandwidth | 5.5G~6GHz |
| Radiation Efficiency | 0.98 |
| SWR | 1.07 at Center Frequency |
| Polarization | RHCP |
| Body Case Material | PC+ABS |
| Weight (g) | 7.8g |
| Length (mm) | Φ11*60mm |
| Shipping Weight | 0.021 kg |
| Shipping Dimensions | 8 × 3 × 3 cm |
What's in the box
- 2 x Foxeer Lollipop 4 RP-SMA FPV Antenna
Frequently Asked Questions
What connector does this antenna use?
What frequency does it work on?
What is the gain and polarization?
How much does it weigh?
What is included in the package?
How should I care for the antenna?
Overview
The Foxeer Lollipop 4 is a 5.8GHz FPV antenna designed for pilots who value a light, compact omni antenna that keeps video transmission consistent during active flying. Its right-hand circular polarization and 2.6dBi gain make it a practical choice for racing and freestyle builds, while the 7.8g weight means it barely affects how your quad handles.
Key Features
- 5.8GHz band coverage: operates across a 5.5G to 6GHz bandwidth.
- Circular polarization: RHCP design for circularly polarized FPV systems.
- Efficient signal path: 0.98 radiation efficiency and 1.07 SWR at center frequency.
- Lightweight housing: PC+ABS body at 7.8g and about 11mm diameter by 60mm long.
- RP-SMA connector: screws onto compatible RP-SMA antenna mounts.
Specifications Explained
Gain (2.6dBi): a modest, balanced gain figure typical of omni antennas. It spreads signal around the antenna rather than focusing it in one direction, which helps when your quad changes orientation constantly.
Axial Ratio (close to 1): a low axial ratio means the antenna maintains good circular polarization, which supports cleaner reception with matching RHCP antennas.
SWR (1.07 at center frequency): a low standing wave ratio indicates the antenna is well matched to the transmitter, so less power is reflected back.
Radiation efficiency (0.98): most of the delivered signal is radiated rather than lost, which supports usable range.
Polarization (RHCP): right-hand circular polarization reduces interference from multipath reflections compared with linear antennas.
Compatibility and Requirements
This antenna uses an RP-SMA connector, so it must be paired with RP-SMA equipment. It operates on 5.8GHz and covers 5.5G to 6GHz, so it is intended for 5.8GHz FPV systems. Check the connector type on your VTX, receiver or goggles before ordering, since SMA and RP-SMA are not interchangeable.
Typical Uses
Well suited to drone racing and freestyle quads, general 5.8GHz FPV video links, and any setup where a lightweight omni antenna is preferred. The omnidirectional pattern gives broad coverage, which helps during fast maneuvers and direction changes.
What's in the Box
Package includes 2 x Foxeer Lollipop 4 RP-SMA FPV Antenna.

Quick specs
- Item Type
- Antenna
- Connector Type
- RP-SMA
- Frequency (GHz)
- 5.8
- Gain
- 2.6dBi
- Axial Ratio
- Close to 1
- Bandwidth
- 5.5G~6GHz



















