
1 / 5 · Click to enlarge
AI Summary
A slim four-channel 60A BLHeli32 speed controller rated for 3-8S LiPo with telemetry support. Its 20x20mm mounting and 13g weight make it easy to fit into tight FPV frames.
Key Highlights
- BLHeli32 firmware for precise motor control and easy programming
- 60A continuous and 100A burst current per channel
- DC 9V to 40V input covers 3S through 8S LiPo builds
- Telemetry supported for live data through the flight controller
- Slim 36 x 41mm body with 20x20mm M3 mounting pattern
- Weighs only 13g to keep your build light
Ideal For
- FPV freestyle pilots building 5-inch quads
- Racing drone builders working with 3-8S setups
- Cinematic FPV pilots who want telemetry data
- Makers building compact multirotors with 20x20mm stacks
Buying Tip
Check that your flight controller provides logic power or add a separate 5V BEC, since this ESC has no built-in BEC.
Elecvora expert review
Our verdict
The Reaper F4 60A Slim packs a 60A continuous rating, 3-8S input and telemetry into a 13g board with a 20x20mm footprint. It is a sensible choice for builders who already plan a separate 5V supply and want BLHeli32 flexibility.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 60A continuous and 100A burst per channel
- Wide 3-8S LiPo input range
- Telemetry support for flight data
- Slim 36 x 41mm body at only 13g
- BLHeli32 programming with multiple input signals
Cons
- No built-in BEC, so logic power must come from elsewhere
- Requires soldering for motor and power connections
- Package contents are not confirmed in the supplied data
Best for
FPV builders running 3-8S quads with 20x20mm stacks
Not ideal for
Pilots who want a plug-and-play ESC with an integrated BEC
Specifications
| Item Type | Electronic Speed Controller |
|---|---|
| Firmware | BLHeli 32 |
| Continuous Discharge Current (A) | 60 |
| Burst Current (A) | 100A*4 |
| Input Voltage (V) | DC 9V~40V (3-8S Lipo) |
| BEC (Y/N) | NO |
| Telemetry | Supported |
| ESC Programming | BLHeli32 |
| Input signal | DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. |
| Operating Temperature (°C) | -20℃ ~ +55℃ |
| Operating humidity | 20~95% |
| Storage Temperature (°C) | -20℃ ~ +70℃ |
| Mounting Hole Diameter (mm) | 20×20mm, Φ4mm/ M3 |
| Overall Dimension | 36*41mm |
| Weight (g) | 13g |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 7 × 7 × 4 cm |
Frequently Asked Questions
What firmware does the Foxeer Reaper F4 60A Slim ESC use?
What battery voltage can I use?
Does it have a built-in BEC?
Which input signals are supported?
What mounting pattern does it use?
Is telemetry supported?
Overview
The Foxeer Reaper F4 60A Slim ESC is a four-channel speed controller designed for FPV drone builds where space is tight but power demands are not small. It combines BLHeli32 firmware with a 60A continuous rating per channel and a 100A burst rating, so it can handle aggressive throttle inputs without feeling constrained. The slim 36 x 41mm body and 13g weight help keep a frame clean and light.
Input voltage spans DC 9V to 40V, which covers 3S up to 8S LiPo packs. There is no built-in BEC, so the flight controller or a separate regulator supplies logic power. Telemetry is supported, letting the flight controller read ESC data during flight and after landing.
Key Features
- BLHeli32 firmware: a well-known platform for motor timing, direction and protocol configuration.
- 60A continuous, 100A burst: headroom for punchy freestyle and racing throttle use.
- 3-8S LiPo range: one ESC family for builds from moderate to high cell counts.
- Telemetry support: keeps ESC data visible to the flight controller.
- 20x20mm mounting: M3 holes with a 4mm diameter suit common stack layouts.
- Multiple input signals: DShot 150/300/600/1200, MultiShot and OneShot are all listed.
Specifications Explained
Current ratings
The 60A continuous figure is the load the ESC is rated to carry steadily, while the 100A burst rating covers short peaks. Matching motors and props to the build's expected draw keeps the ESC inside its comfort zone.
Voltage range
DC 9V to 40V means the ESC works across 3S to 8S LiPo packs. Confirm your pack voltage stays within that window before connecting power.
Firmware and programming
BLHeli32 handles programming, so settings are adjusted through BLHeli32-compatible tools rather than physical jumpers. The listed input signals include DShot 150, 300, 600 and 1200, plus MultiShot and OneShot, giving you protocol options to match your flight controller.
Mounting and size
The 20x20mm hole spacing with 4mm holes and M3 sizing fits many modern stacks. At 36 x 41mm and 13g, it leaves room for wiring and accessories.
Environment
Operating temperature is rated from -20C to +55C with 20 to 95% humidity, and storage from -20C to +70C. Those figures describe the conditions the unit is rated for, not a guarantee against crash damage.
Compatibility and Requirements
This ESC has no BEC, so plan a separate 5V source for your flight controller and receiver if your stack does not already provide one. Use a LiPo pack within the 3S to 8S range and keep input voltage between 9V and 40V. Match the input signal to what your flight controller supports, from DShot 150 up to DShot 1200, MultiShot or OneShot. The 20x20mm M3 mounting pattern must match your frame or stack.
Typical Uses
This ESC suits FPV freestyle quads, racing builds and cinematic platforms where a slim four-channel controller with telemetry is useful. It also fits larger multirotor projects that need a compact 3-8S controller with a 20x20mm footprint.
What's in the Box
Package contents are not confirmed in the supplied data, so check the listing details before ordering if you need to know exactly what is included.

Quick specs
- Item Type
- Electronic Speed Controller
- Firmware
- BLHeli 32
- Continuous Discharge Current (A)
- 60
- Burst Current (A)
- 100A*4
- Input Voltage (V)
- DC 9V~40V (3-8S Lipo)
- BEC (Y/N)
- NO



















