Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Good Display, this e-ink paper display is a good fit for everyday home and hobby use. Main specs: model no. / name Display Module; display size (inch) 2.7; ic chip SSD1680.

Key Highlights

  • Model No. / Name: Display Module
  • Display Size (Inch): 2.7
  • IC Chip: SSD1680

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Model No. / NameDisplay Module
Display Size (Inch)2.7
Display Resolution (pixel)264 × 176
IC ChipSSD1680
Operating Temperature (°C)0 to 50
Storage Temperature (°C)-25 to 70
Connector Type24 Pin FPC
InterfaceSPI
Full Refresh Time (s)3
Standby Power (mW)0.003
Length (mm)105
Width (mm)45
Weight (g)8g
ColorBlack White
Shipping Weight0.011 kg
Shipping Dimensions14 × 9 × 0.1 cm

Overview

The 2.7 Inch Black and White E-Paper Display, made by Good Display, is listed in our e-ink paper display range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Display Module (measured diagonally; compare with the space you have before ordering)
  • Display Size (Inch): 2.7 (measured diagonally; compare with the space you have before ordering)
  • Display Resolution (pixel): 264 × 176 (measured diagonally; compare with the space you have before ordering)
  • IC Chip: SSD1680
  • Operating Temperature (°C): 0 to 50
  • Storage Temperature (°C): -25 to 70 (space for firmware, files or media)
  • Connector Type: 24 Pin FPC (confirm your cable or board uses the same connector)
  • Interface: SPI (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a 2.7-inch small e-ink display with a capacitive touch screen, 264x176 resolution, and SPI interface, and the display is capable to display images with black and white content. It supports 3s full refresh, 1.5s fast refresh, and 0.42s partial refresh. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEW027T91-T01 is perfect for low-power devices powered by solar or batteries.

Features:

  1. Support 4 Grayscale
  2. With capacitive touchscreen
  3. It supports partial refresh, the refresh rate is 0.42s/frame
  4. Versatile. Use in portrait or landscape format
  5. Bistable. (Will continue to display with no power source)
  6. I2C Signal Master Interface to read an external temperature sensor
  7. It enables a greater contrast ratio and wider viewing angle with high reflectance compared to liquid crystal displays
  8.  Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32

Package Includes:

1 x 2.7 Inch Black and White E-Paper Display

Quick specs

Model No. / Name
Display Module
Display Size (Inch)
2.7
Display Resolution (pixel)
264 × 176
IC Chip
SSD1680
Operating Temperature (°C)
0 to 50
Storage Temperature (°C)
-25 to 70
See all specifications