Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Hobbywing, this (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Brushless ESC; bec (y/n) NO; color Black. Check that your power source supplies 2~6S lipo before connecting it.

Key Highlights

  • Item Type: Brushless ESC
  • BEC (Y/N): NO
  • Color: Black

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeBrushless ESC
BEC (Y/N)NO
ColorBlack
Dimensions (L x W x H) mm72 x 26 x 6
Weight (g)26
Continuous Discharge Current (A)40
Operating Voltage (VDC)2~6S lipo
Shipping Weight0.04 kg
Shipping Dimensions8 × 5 × 2 cm

Overview

The Hobbywing Xrotor 40A ESC for DIY Multicopter Drone, made by Hobbywing, is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushless ESC
  • BEC (Y/N): NO
  • Color: Black
  • Dimensions (L x W x H) mm: 72 x 26 x 6 (measure your mounting space before ordering)
  • Weight (g): 26 (important for drones, RC models and anything you carry)
  • Continuous Discharge Current (A): 40 (your supply must deliver at least this much current)
  • Operating Voltage (VDC): 2~6S lipo (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.04 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use. The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.

Features:

  1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
  2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
  3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
  4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
  5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
  6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
  7. Ultra-low resistance MOSFET, strong flow capacity.

Package Includes:

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

Quick specs

Item Type
Brushless ESC
BEC (Y/N)
NO
Color
Black
Dimensions (L x W x H) mm
72 x 26 x 6
Weight (g)
26
Continuous Discharge Current (A)
40
See all specifications