
1 / 6 · Click to enlarge
AI Summary
A matched clockwise propulsion set combining the Hobbywing XRotor X9 Plus 100KV motor with a 36190 folding propeller. It is rated for 6-14S input and up to 27kg of thrust per axis, making it a practical building block for heavy-lift multirotors.
Key Highlights
- 100KV large-load motor with 96x20mm stator for high-torque lift
- Matched 36190 folding propeller in clockwise rotation
- Rated up to 27kg thrust per axis at 53.6V at sea level
- 6-14S battery compatibility for flexible high-voltage builds
- IPX7 safety rating and -20 to 50C operating range
- Japanese bearings for smooth, durable rotation
Ideal For
- Heavy-lift multirotor builders
- Industrial drone integrators
- Agricultural drone projects
- Professional aerial platform designers
- Large airframe builders needing folding props
Buying Tip
Confirm you are ordering the clockwise rotation unit, since counter-rotating arms will need the opposite version to balance torque.
Elecvora expert review
Our verdict
A well-matched clockwise propulsion set for large multirotors, with generous thrust headroom and a folding propeller that eases handling of big airframes. It suits builders who already understand high-voltage, heavy-lift systems rather than beginners.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Motor and propeller supplied as a matched pair
- Strong 27kg per-axis thrust limitation with an 11-13kg recommended load
- IPX7 safety rating and wide -20 to 50C operating range
- Folding propeller simplifies transport and storage
Cons
- Sold as a single clockwise unit, so opposite rotation must be sourced separately
- Programming box for settings changes is not included
- Aimed at experienced heavy-lift builders, not casual pilots
Best for
Heavy-lift and industrial multirotor builds
Not ideal for
Small racing quads or first-time drone builders
Specifications
| Item Type | Kit |
|---|---|
| Rotation angle | CW |
| Thrust Limitation | 27kg/Axis (53.6V, Sea Level) |
| Weight Lift | 11-13kg/Axis (53.6V, Sea Level) |
| Battery Cell Count | 6-14S |
| Motor KV (RPM/V) | 100 KV |
| Stator Size (mm) | 96X20 |
| Bearing | Imported from Japan |
| Operating Temperature (°C) | -20~50 |
| Safety IP Rating | IPX7 |
| Compatible Prop (inch) | 36190 |
| Shipping Weight | 2.198 kg |
| Shipping Dimensions | 38 × 29 × 16 cm |
What's in the box
- 1 x Hobbywing XRotor X9 Plus Motor - CW
- 1 x Hobbywing X9 Plus 36190 Folding Propeller - CW
Frequently Asked Questions
What rotation direction is this kit?
What battery voltage does the motor support?
How much thrust can it produce?
Is the propeller included?
Can I change motor settings?
Is it suitable for wet conditions?
Overview
The Hobbywing XRotor X9 Plus Motor and 36190 Folding Propeller Combo Kit is a matched propulsion set for serious multirotor builds. Each kit contains one clockwise X9 Plus motor and one clockwise 36190 folding propeller, so the motor and blade are designed to work together rather than being paired by guesswork. The 100KV motor uses a 96x20mm stator and Japanese bearings, and Hobbywing rates the combination for up to 27kg of thrust per axis at 53.6V at sea level.
Key Features
- Matched power system: motor and 36190 folding propeller supplied as one clockwise unit.
- High-torque 100KV motor: a 96x20mm stator built for large-load airframes.
- Wide voltage range: accepts 6-14S battery packs.
- Field-ready protection: IPX7 safety rating with an operating temperature range of -20 to 50C.
- Folding propeller: blades fold for easier transport and storage of large frames.
Specifications Explained
The 100KV rating describes rotation speed per volt applied, and this low figure signals a motor intended for large, slow-turning propellers rather than small racing setups. The 96x20mm stator gives the electromagnetic capacity to move heavy loads. Hobbywing lists a 27kg per-axis thrust limitation at 53.6V at sea level, while recommending an 11-13kg lift load per axis for better efficiency. In practice, that gap means the system has headroom beyond its normal working load. The 6-14S range lets builders choose pack voltage to suit the airframe, and the IPX7 safety rating supports use in wet or dusty environments.
Compatibility and Requirements
This kit is designed around the 36190 propeller size and clockwise rotation. It requires a suitable 6-14S battery system and a compatible flight controller and ESC setup as part of the wider build. Hobbywing notes that settings can be programmed with the Hobbywing Multifunction LCD Program Box, which is sold separately.
Typical Uses
The load figures and folding propeller make this combo suitable for heavy-lift multirotors, industrial inspection platforms, agricultural airframes and other large drones where each axis carries a meaningful payload. Builders assembling a complete aircraft should plan rotation direction carefully, since this listing is the clockwise version.
What's in the Box
- 1 x Hobbywing XRotor X9 Plus Motor - CW
- 1 x Hobbywing X9 Plus 36190 Folding Propeller - CW
Quick specs
- Item Type
- Kit
- Rotation angle
- CW
- Thrust Limitation
- 27kg/Axis (53.6V, Sea Level)
- Weight Lift
- 11-13kg/Axis (53.6V, Sea Level)
- Battery Cell Count
- 6-14S
- Motor KV (RPM/V)
- 100 KV



















