Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A steel horizontal shaft support for anchoring 10 mm shafts on 3D printers and linear motion assemblies. Its 32 mm hole pitch and 5.5 mm mounting holes make it a simple bolt-on alternative to a custom-machined bracket.

Key Highlights

  • Steel construction for a rigid, durable shaft mount
  • Fits 10 mm diameter shafts and linear rails
  • Compact 43 x 24 x 10 mm body for tight builds
  • 5.5 mm mounting holes on a 32 mm pitch circle
  • Anchors shafts at both ends for steadier travel
  • Lightweight at about 0.1 kg shipping weight

Ideal For

  • 3D printer builders assembling linear motion axes
  • Makers prototyping small production equipment
  • Technicians repairing or upgrading shaft mounts
  • DIY linear rail and CNC-style projects
  • Workshops needing a standard 10 mm shaft bracket

Buying Tip

Measure your shaft to confirm it is 10 mm and check that your mounting plate matches the 32 mm hole spacing before ordering.

Elecvora expert review

Our verdict

A simple, solid steel bracket that does one job well: holding a 10 mm shaft in place without custom machining. It is a sensible spare or build part for anyone already working with 10 mm linear shafts.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Steel construction feels rigid and stable
  • Standard 32 mm hole pitch simplifies mounting
  • Compact 43 x 24 x 10 mm size suits tight frames
  • Low weight adds little load to the assembly

Cons

  • Fasteners and shaft are not included
  • Only suits 10 mm shafts
  • Unbranded part with no stated tolerances

Best for

Builders and repairers using 10 mm linear shafts

Not ideal for

Projects needing other shaft diameters or pre-drilled mounting plates

Specifications

Model No. / NameSHF10
MaterialSteel
Shaft Diameter10 mm
Size (mm)43x24x10
Hole diameter(mm)5.5
Mounting Hole PCD (mm)32
Shipping Weight0.1 kg
Shipping Dimensions5 × 3 × 3 cm

What's in the box

  • 1 x SHF10 horizontal shaft support

Frequently Asked Questions

What shaft size does this support fit?
It is made for 10 mm diameter shafts. Check your shaft measurement before ordering, as other sizes will not seat correctly.
Are mounting screws included?
No. The package contains the shaft support only, so you will need to supply fasteners that fit the 5.5 mm holes.
What is the mounting hole spacing?
The holes sit on a 32 mm pitch circle and are 5.5 mm in diameter. Drill or slot your plate to match that spacing.
Can I use it on a 3D printer?
Yes, it is intended for 3D printers and similar linear motion setups where a 10 mm shaft needs to be held at the end of a rail.
How should I care for it?
Keep the support clean and dry, and check the fasteners occasionally for looseness. A light wipe-down is usually enough.
What are the dimensions?
The body measures 43 x 24 x 10 mm and the shipping weight is about 0.1 kg.

Overview

The SHF10 horizontal shaft support is a steel mounting block that holds a 10 mm shaft in a fixed horizontal position. It is typically used at the ends of a linear rail so the shaft stays aligned and the moving carriage runs smoothly. Instead of designing and machining a one-off bracket, you can bolt this standard part to your frame and get a repeatable mounting point.

With a body of 43 x 24 x 10 mm, the support fits into compact assemblies where space around the shaft is limited. It is aimed at 3D printer builders, makers and technicians working on small production or prototype equipment.

Key Features

  • Steel body for a firm, stable hold on the shaft
  • 10 mm shaft diameter matching common linear shafts and rails
  • 32 mm mounting hole PCD with 5.5 mm holes for straightforward bolting
  • Compact footprint of 43 x 24 x 10 mm
  • Low-friction support that helps the shaft run true

Specifications Explained

Shaft diameter: 10 mm

This is the size of shaft the support is made to hold. Check that your shaft or rail measures 10 mm across before ordering, since the support is sized for that diameter only.

Mounting holes and PCD

The two mounting holes are 5.5 mm in diameter and sit on a 32 mm pitch circle. The 5.5 mm size leaves room for common fasteners, while the 32 mm spacing determines where you drill or slot your mounting plate.

Body size: 43 x 24 x 10 mm

These dimensions tell you how much space the support occupies. The 10 mm thickness keeps it low-profile, which helps in tight printer frames and compact linear stages.

Weight

Shipping weight is about 0.1 kg, so the part adds little load to a moving gantry or frame.

Compatibility and Requirements

The support is intended for 10 mm shafts. Mounting requires fasteners that pass through the 5.5 mm holes and a plate or frame drilled to the 32 mm hole spacing. No fasteners or shaft are included, so plan for those separately.

Typical Uses

  • Supporting 10 mm shafts at the ends of a linear rail on a 3D printer
  • Building prototype or small-batch linear motion equipment
  • Repairing or upgrading an existing shaft mounting point
  • Holding shafts steady on custom fixtures and test rigs

What's in the Box

One SHF10 horizontal shaft support is supplied. Shafts, rails and fasteners are not included.

Quick specs

Model No. / Name
SHF10
Material
Steel
Shaft Diameter
10 mm
Size (mm)
43x24x10
Hole diameter(mm)
5.5
Mounting Hole PCD (mm)
32
See all specifications