Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This signal generator module & oscilloscopes is a good fit for makers, students and electronics hobbyists. Main specs: item type Signal Generator; model no. / name ICL8038; output Triangular wave, Square wave and sine wave. Check that your power source supplies 12 to 15 before connecting it.

Key Highlights

  • Item Type: Signal Generator
  • Model No. / Name: ICL8038
  • Output: Triangular wave, Square wave and sine wave

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSignal Generator
Operating Voltage (VDC)12 to 15
Model No. / NameICL8038
OutputTriangular wave, Square wave and sine wave
Frequency10HZ ~ 450kHz
PWM Duty Cycle Range2% to 98%
Drifting Temperature50ppm / ℃ Low
Operating Temperature (°C)0 ~ 70 ℃
Board Size (mm)54.5*37.8mm
Shipping Weight0.016 kg
Shipping Dimensions10 × 6 × 2 cm

Overview

The ICL8038 12V to 15V, Signal Generator, Medium/Low Signal, Frequency 10Hz-450KHz, Triangular/Rectangular/S, ine Wave Generator, Module is listed in our signal generator module & oscilloscopes range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Signal Generator
  • Operating Voltage (VDC): 12 to 15 (match this to your power supply; too high a voltage can damage the part)
  • Model No. / Name: ICL8038
  • Output: Triangular wave, Square wave and sine wave
  • Frequency: 10HZ ~ 450kHz (make sure the rest of your system works at this frequency)
  • PWM Duty Cycle Range: 2% to 98% (quoted range is usually line-of-sight; walls and interference shorten it)
  • Drifting Temperature: 50ppm / ℃ Low
  • Operating Temperature (°C): 0 ~ 70 ℃

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The LC ICL8038 module is designed for common frequency ranges. It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 10Hz to 450KHz. A sine wave can be used for test signals, drive signals, carrier frequency signals, etc; a square wave can be used for switching signals, trigger signals, etc; the triangular wave is mainly used for scanning signals.

Function:

  1. VCC, GND: working voltage
  2. AC: with DC bias output
  3. G: ground
  4. DC: pure signal output
  5. R11: Frequency adjustment
  6. R12: Square wave duty cycle adjustment
  7. R13: Sine wave linear adjustment
  8. R14: Amplitude adjustment
  9. R15: Square wave linear adjustment
  10. Jumper P2: select different wave-forms(triangular, square or sine waves)
  11. Jumper P3: select different frequency ranges 10Hz-450Hz,90Hz-1.5KHz,940Hz-15KHz,6KHz-120KHz,20KHz-450KHz

Features:

  1. The LC ICL8038 module is designed for common frequency ranges.
  2.  It is adjustable from 5 gears and generates low-distortion triangular waves, square and sine waves from 0Hz to 450KHz.
  3. Sine waves can be used for test signals, drive signals, carrier frequency signals, etc.
  4. A square wave can be used for switching signals, trigger signals, etc; the triangular wave is mainly used for scanning signals.
  5.  Portable design, easy to operate.

Package Includes :

1 x ICL8038 12V to 15V Signal Generator 10Hz-450KHz Module

Quick specs

Item Type
Signal Generator
Operating Voltage (VDC)
12 to 15
Model No. / Name
ICL8038
Output
Triangular wave, Square wave and sine wave
Frequency
10HZ ~ 450kHz
PWM Duty Cycle Range
2% to 98%
See all specifications