Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 4-in-1 ESC rated for 55A continuous and 65A burst on 2-6S LiPo, with a G071 MCU and 20x20mm mounting. Its small 11.3g footprint makes it a natural fit for mini FPV quad builds.

Key Highlights

  • 55A continuous and 65A burst current per channel
  • 2-6S LiPo input for flexible battery choices
  • G071 MCU for smooth, precise motor control
  • 20 x 20mm mounting with Φ4mm holes
  • Integrated current sensor for real-time monitoring
  • Weighs only 11.3g for weight-conscious builds

Ideal For

  • FPV pilots building compact 20x20mm mini quads
  • Freestyle pilots who need strong current headroom
  • Racers refreshing electronics on a mini frame
  • Makers assembling 2-6S multirotor projects

Buying Tip

Check that your flight controller stack uses a 20 x 20mm mounting pattern and that your motors and battery stay within the 2-6S, 55A continuous rating before buying.

Elecvora expert review

Our verdict

The BLITZ Mini E55 packs a 55A continuous rating into an 11.3g, 20x20mm board, which makes it a strong fit for compact mini quads. Its G071 MCU, current sensor and broad protocol support round out a well-rounded four-in-one ESC.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 55A continuous and 65A burst per channel
  • Light 11.3g board with 20x20mm mounting
  • G071 MCU with DShot, MultiShot and OneShot support
  • Integrated current sensor for real-time monitoring
  • 2-6S LiPo input covers several battery classes

Cons

  • Requires soldering for installation
  • Needs a compatible flight controller and battery
  • Burst rating is short-term only, so prop and motor choice matters

Best for

Mini FPV quads built on a 20 x 20mm stack

Not ideal for

Large builds or pilots who want plug-and-play installation without soldering

Specifications

Item TypeESC
Mounting Hole Diameter (mm)20 x20 mm/Φ4mm
Supported Battery2-6S lipo input
Main control (MCU)G071
Constant Current (A)55 Amps
Burst Current (A)65
Weight (g)11.3
Shipping Weight0.046 kg
Shipping Dimensions7 × 7 × 3 cm

What's in the box

  • 1 x BLITZ Mini E55 4-IN-1 2-6S ESC
  • 1 x Power cables and ESC signal wires

Frequently Asked Questions

What battery can I use with this ESC?
It supports 2-6S LiPo input. Choose a pack within that range and make sure your motors and flight controller are rated for the same voltage.
What protocols does it support?
The ESC supports DShot150/300/600, MultiShot and OneShot. Set the matching protocol in your flight controller firmware.
What is the mounting pattern?
Mounting holes are spaced at 20 x 20mm with Φ4mm holes, matching common mini stacks.
Does it include wires?
Yes, the package includes the ESC plus power cables and ESC signal wires.
How much does it weigh?
The board weighs 11.3g, keeping added mass low on mini frames.
Do I need to solder to install it?
Yes. Motor, power and signal connections are soldered, so basic soldering skills are required.

Overview

The iFlight BLITZ Mini E55 is a four-in-one ESC designed for small FPV quadcopters where space and weight are tight. Each channel is rated for 55A continuous current with a 65A burst, giving it headroom for motors that draw heavily during aggressive throttle changes. The board accepts 2-6S LiPo input, so it can be paired with a range of battery setups.

A G071 main control unit manages motor signalling, and the ESC supports DShot150/300/600 plus MultiShot and OneShot protocols. The integrated current sensor lets your flight controller report live current draw, which is useful for tuning and for keeping an eye on consumption.

Key Features

  • Four-in-one layout keeps wiring short and the build clean
  • 55A continuous and 65A burst per channel
  • 2-6S LiPo input range
  • G071 MCU for smooth, precise motor control
  • Current sensor for real-time monitoring
  • DShot150/300/600, MultiShot and OneShot support
  • 20 x 20mm mounting pattern with Φ4mm holes
  • Lightweight at just 11.3g

Specifications Explained

Current rating

55A continuous per channel is a healthy figure for mini-class motors, while the 65A burst rating covers short spikes when you punch the throttle. Matching the ESC to your motor and prop choice keeps it within its rated envelope.

Voltage range

Support for 2-6S LiPo means the same ESC works across several battery classes, from lightweight 2S setups up to 6S builds. Always confirm your motors and flight controller are rated for the pack you choose.

Mounting and size

The 20 x 20mm hole spacing with Φ4mm holes fits common mini stacks. At 11.3g, the board adds very little mass to the frame.

Compatibility and Requirements

The ESC supports DShot150/300/600, MultiShot and OneShot signal protocols and uses a G071 MCU. It requires a compatible flight controller and a 2-6S LiPo battery. Installation involves soldering motor and power connections, so basic soldering skills are needed.

Typical Uses

This ESC suits mini FPV quadcopters built on a 20 x 20mm stack, including freestyle and racing builds where compact electronics and dependable current handling matter. It is also a sensible replacement part when refreshing an existing mini quad.

What's in the Box

  • 1 x BLITZ Mini E55 4-IN-1 2-6S ESC
  • 1 x Power cables and ESC signal wires

Quick specs

Item Type
ESC
Mounting Hole Diameter (mm)
20 x20 mm/Φ4mm
Supported Battery
2-6S lipo input
Main control (MCU)
G071
Constant Current (A)
55 Amps
Burst Current (A)
65
See all specifications