Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This breakout board is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 5; model no. / name IRF520; max. output load Voltage: 0 to 24, Current: <5 (1A above need to add heat sink). Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3 to 5
  • Model No. / Name: IRF520
  • Max. Output Load: Voltage: 0 to 24, Current: <5 (1A above need to add heat sink)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3 to 5
Model No. / NameIRF520
Max. Output LoadVoltage: 0 to 24, Current: <5 (1A above need to add heat sink)
PlatformArduino, MCU, ARM, Raspberry PI
Length (mm)34
Width (mm)25
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions4 × 4 × 3 cm

Overview

The IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi is listed in our breakout board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Model No. / Name: IRF520
  • Max. Output Load: Voltage: 0 to 24, Current: <5 (1A above need to add heat sink) (match this to your power supply; too high a voltage can damage the part)
  • Platform: Arduino, MCU, ARM, Raspberry PI (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Length (mm): 34 (measure your mounting space before ordering)
  • Width (mm): 25 (measure your mounting space before ordering)
  • Weight (g): 10 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

 IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.

Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. Pulse current through a PWM pin, and use this to control a pump, LED, or other DC device at up to 24v, and ~5A.

Its main purpose of this IRF520 MOSFET Driver Module is to provide a low-cost way to drive a DC motor for robotics applications, but the module can be used to control most high current DC loads. Screw terminals are provided to interface with your load an external power source. An LED indicator provides a visual indication of when your load is being switched.

The simplest way of explaining how this little board works is as below,

You connect the power for the device you want to control the Vin and GND. You connect your device to the V+ and V- screw terminals. When the SIG line is HIGH, a little LED lights up, and the GND is 'connected' to the V-. When the SIG line is LOW, the LED turns off, and the GND becomes 'disconnected' to the V-. The V+ and Vin are continuously connected.

You can power this device from your Arduino, VCC goes to the 5V connection and GND to the GND pin on your Arduino.

Pin Connections :
IFR520_MOSFET_Module_DC_Motor_Example

Features :

  1. Using original IRF520 Power MOS, you can adjust the output PWM
  2. Arduino drive up to 24V allows the load, such as LED lights, DC motors, miniature pumps, solenoid valves
  3. PWM dimming LED can be used to achieve step less dimming, variable speed motor.

Package Includes :

1 x IRF520 MOSFET Driver Module.

Quick specs

Operating Voltage (V)
3.3 to 5
Model No. / Name
IRF520
Max. Output Load
Voltage: 0 to 24, Current: &lt;5 (1A above need to add heat sink)
Platform
Arduino, MCU, ARM, Raspberry PI
Length (mm)
34
Width (mm)
25
See all specifications