
1 / 3 · Click to enlarge
AI Summary
This ISD1820 module records and plays back up to 10 seconds of voice with its on-board mic and included 8 Ohm speaker. It works from 3-5V and keeps your recording even without power, making it easy to add audio to any project.
Key Highlights
- Records up to 10 seconds of voice on non-volatile memory
- On-board electret microphone for instant recording
- Includes 40mm 8 Ohm 0.5W speaker with 20cm cable
- Three push buttons for record, full play, and jog play
- Header pins for microcontroller control with one digital pin
- Wide operating voltage range of 3 to 5 VDC
Ideal For
- DIY electronics hobbyists adding voice to projects
- Students learning about audio recording and playback
- Makers building interactive props or costumes
- Model railroad and RC enthusiasts wanting sound effects
- Educators creating engaging classroom demonstrations
Buying Tip
Remember that the ISD1820 stores only one message at a time, so plan your project around a single 10-second recording.
Elecvora expert review
Our verdict
The ISD1820 module offers a straightforward way to add voice recording and playback to projects without complex coding. Its included speaker and on-board mic make it a self-contained solution for simple audio needs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple button operation for recording and playback
- Non-volatile memory retains recordings without power
- Includes speaker and microphone for immediate use
- Compact size fits into small enclosures
- Microcontroller-compatible with header pins
Cons
- Only stores a single 10-second message
- Speaker output is modest at 0.5W
- Requires soldering or jumper wires for microcontroller connection
Best for
Beginners and makers needing simple voice prompts
Not ideal for
Projects requiring multiple messages or high-fidelity audio
Specifications
| Operating Voltage (VDC) | 3 to 5 |
|---|---|
| Speaker (Y/N) | 8 Ω, 0.5W |
| Cable Length | 20 (Speaker Connecting) |
| Speaker Diameter (mm) | 40 |
| Length (mm) | 42 |
| Width (mm) | 33.5 |
| Weight (g) | 20 |
| Dimensions (L x W x H) mm | 43x34x11 |
| Shipping Weight | 0.022 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x ISD1820 Recording Module Voice Board with On-Board Mic
- 1 x Loud Speaker (8 Ohm, 0.5W, 40mm) with 20cm cable
Frequently Asked Questions
How long can the recorded message be?
Does the recording stay saved when power is removed?
What is the operating voltage range?
Can I connect my own speaker?
How do I control playback with a microcontroller?
What is included in the package?
Overview
The ISD1820 Voice Recorder Module is a complete, self-contained solution for adding voice recording and playback to your electronics projects. At its core is the ISD1820 voice record and playback IC, which stores a single message of up to 10 seconds in analog flash memory. This means your recording is preserved even when the module is powered down. The board comes with an on-board electret microphone and a separate 40mm 8 Ohm 0.5W speaker that connects via a 20cm cable, so you can record and listen back without any extra components.
Measuring just 43 x 34 x 11 mm and weighing 20 grams, the module is small enough to fit into tight enclosures. It can be operated entirely through the three on-board push buttons or controlled by a microcontroller such as an Arduino using the exposed header pins. This flexibility makes it suitable for both quick experiments and more integrated designs.
Key Features
- 10-second recording: Capture a single voice message or sound effect up to 10 seconds long.
- Non-volatile storage: The ISD1820 chip retains your recording without power, so no battery backup is needed.
- On-board microphone: An electret mic is mounted directly on the board for immediate recording.
- Multiple playback modes: Use the buttons for record, full playback (RLAYE), and jog playback (PLAYL). Jumpers enable loop mode and direct microphone-to-speaker pass-through.
- Microcontroller friendly: Header pins break out control lines, allowing playback to be triggered by a single digital pin.
- Included speaker: A 40mm 8 Ohm 0.5W speaker with a 20cm cable is provided and connects directly to the module's speaker output.
Specifications Explained
Operating voltage (3 to 5 VDC): The module can be powered from a wide range of common supplies, including 3.3V and 5V microcontroller boards, making it easy to integrate into existing systems.
Speaker (8 Ohm, 0.5W, 40mm diameter): The included speaker is matched to the module's output, ensuring clear and adequate volume for voice prompts and alerts in indoor settings. The 20cm cable gives you flexibility in mounting the speaker away from the board.
Compact dimensions (43 x 34 x 11 mm, 20g): The small footprint and light weight allow the module to be embedded in handheld devices, small robots, or wearable projects without adding bulk.
Compatibility and Requirements
The module is designed to work with any microcontroller that can provide a 3 to 5 VDC supply and a digital control signal, such as Arduino boards. It can also be used standalone with the on-board buttons. No additional programmer or software is required for basic operation. The speaker connects via the provided cable, and the microphone is already on the board.
Typical Uses
- Voice prompts for DIY electronics projects
- Sound effects in model trains, RC vehicles, or robots
- Interactive exhibits and museum displays
- Educational kits for learning about audio recording
- Prop and costume sound modules
- Announcement or alert systems in small devices
What's in the Box
- 1 x ISD1820 Recording Module Voice Board with On-Board Mic
- 1 x Loud Speaker (8 Ohm, 0.5W, 40mm) with 20cm cable
Quick specs
- Operating Voltage (VDC)
- 3 to 5
- Speaker (Y/N)
- 8 Ω, 0.5W
- Cable Length
- 20 (Speaker Connecting)
- Speaker Diameter (mm)
- 40
- Length (mm)
- 42
- Width (mm)
- 33.5
















